Shinko SR024 Bicycle Tire & Tube Set Instruction Manual

1. Танилцуулга

This manual provides essential information for the proper installation, operation, and maintenance of your Shinko SR024 Bicycle Tire and Tube Set. Please read this manual thoroughly before use to ensure safety and optimal performance.

The Shinko SR024 set includes two 20 x 1.95 inch bicycle tires, two inner tubes, and two rim flaps. These tires feature a deep groove structure, ideal for electric assist bicycles, providing enhanced grip and durability.

2. Аюулгүй байдлын мэдээлэл

Унадаг дугуйн эд ангиудтай ажиллахдаа аюулгүй байдлыг үргэлж анхаарч үзээрэй. Буруу суурилуулалт, засвар үйлчилгээ нь таны унадаг дугуйнд ноцтой гэмтэл учруулж болзошгүй.

• Ensure the bicycle is stable and secured before beginning any work.
• Бээлий, нүдний хамгаалалт гэх мэт зохих хамгаалалтын хэрэгслийг өмс.
• Do not exceed the recommended tire pressure. Refer to the specifications section for details.
• Regularly inspect tires and tubes for wear, punctures, or damage. Replace components as necessary.
• If unsure about any installation or maintenance step, consult a professional bicycle mechanic.

3. Бүтээгдэхүүн дууссанview

The Shinko SR024 Bicycle Tire and Tube Set is designed for 20-inch wheels, specifically optimized for electric assist bicycles. Its robust construction and unique tread pattern ensure reliable performance.

Figure 3.1: Shinko SR024 Bicycle Tire and Tube Set. This image displays two black bicycle tires with a distinct tread pattern, accompanied by two coiled black inner tubes.

Зураг 3.2: Нарийвчилсан view of the Shinko SR024 tire tread. The image highlights the deep groove structure and the independent pattern of the side blocks, designed for improved grip.

Гол онцлогууд:

• Хэмжээ: 20 x 1.95 inches (ETRTO: 50-406)
• Tread Design: Deep groove structure with a center slick line for longevity and side block grain for enhanced cornering grip.
• Материал: Нийлэг резин
• Оруулсан бүрэлдэхүүн хэсгүүд: 2 tires, 2 tubes, 2 rim flaps.

4. Тохиргоо ба суурилуулалт

Follow these steps for proper installation of the Shinko SR024 tires and tubes on your bicycle wheels.

Шаардлагатай хэрэгслүүд:

• Дугуйны хөшүүрэг
• Bicycle pump with pressure gauge
• Wrench (if removing wheel)

Суулгах алхамууд:

1. Remove Old Tire and Tube: If replacing existing components, deflate the old tube completely. Use tire levers to carefully pry one bead of the old tire off the rim. Remove the inner tube, then remove the second tire bead.
2. Install Rim Flap: Place the new rim flap around the wheel rim, ensuring it covers the spoke holes completely. This protects the inner tube from punctures.
3. Install First Tire Bead: Place one bead of the new Shinko SR024 tire onto the rim. Work your way around the rim until one side of the tire is fully seated.
4. Дотор хоолой оруулах: Slightly inflate the new inner tube (just enough to give it shape). Insert the valve stem through the valve hole in the rim. Carefully tuck the rest of the tube inside the tire, ensuring it is not twisted.
5. Install Second Tire Bead: Starting opposite the valve stem, begin to push the second bead of the tire onto the rim. Work your way around, using tire levers carefully for the last stubborn section if needed. Be careful not to pinch the inner tube.
6. Дугуйг шахах: Before fully inflating, check that both tire beads are evenly seated on the rim. Inflate the tire slowly, checking the pressure frequently with a gauge. Inflate to the recommended pressure range (35-45 PSI or 2.4-3.1 kgf/cm2).
7. Эцсийн шалгалт: Spin the wheel to ensure the tire is seated correctly and runs true. Check for any bulges or unevenness.

5. Үйл ажиллагааны талаар анхаарах зүйлс

Once installed, proper operation involves maintaining correct tire pressure and being aware of riding conditions.

• Дугуйн даралт: Always maintain tire pressure within the recommended range of 35-45 PSI (2.4-3.1 kgf/cm2). Incorrect pressure can affect handling, efficiency, and tire lifespan.
• Унадаг гадаргуу: While designed for durability, avoid sharp objects and excessively rough terrain to prevent punctures and damage.
• Булан: The side block grain is designed to improve grip during cornering. Lean into turns smoothly to utilize this feature effectively.

6. Засвар үйлчилгээ

Regular maintenance extends the life of your Shinko SR024 tires and tubes and ensures safe riding.

• Pressure Checks: Check tire pressure before every ride, or at least weekly.
• Харааны үзлэг: Regularly inspect the tire tread and sidewalls for cuts, cracks, embedded debris, or excessive wear. Remove any small stones or glass shards.
• Tread Wear: Monitor tread wear indicators (if present) or the depth of the tread. Replace tires when the tread is significantly worn, especially the center slick line.
• Цэвэрлэгээ: Clean tires with mild soap and water. Avoid harsh chemicals that can degrade the rubber.
• Хадгалах: Store bicycles with these tires in a cool, dry place away from direct sunlight and extreme temperatures to prevent rubber degradation.

7. Алдаа засах

This section addresses common issues you might encounter with your bicycle tires and tubes.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

For warranty information or technical support regarding your Shinko SR024 Bicycle Tire and Tube Set, please contact Shinko customer service directly. Keep your purchase receipt as proof of purchase.

While specific warranty details are not provided in this manual, general product warranties typically cover manufacturing defects for a limited period from the date of purchase. Damage due to improper installation, misuse, accidents, or normal wear and tear is usually not covered.

For further assistance, please refer to the official Shinko webсайт эсвэл худалдагчтайгаа холбогдоно уу.