1. Танилцуулга
This manual provides essential information for the proper installation, setup, and operation of your FLIPSKY FT85BS V2.0 84V 60A Electronic Speed Controller (ESC). Please read this manual thoroughly before use to ensure optimal performance and safety.
2. Аюулгүй байдлын мэдээлэл
Always prioritize safety when working with high-voltage electronic components. Improper handling or installation can lead to serious injury or damage to equipment.
- Богино холболтоос сэргийлэхийн тулд бүх холболтууд найдвартай, тусгаарлагдсан эсэхийг шалгаарай.
- Зайны хэмжээг баталгаажуулна ууtage and polarity before connecting to the ESC.
- Avoid touching exposed wires or terminals when the system is powered.
- Operate in a well-ventilated area to prevent overheating.
- Refer to the manufacturer's guidelines for all connected components (motors, batteries, etc.).
3. Бүтээгдэхүүн дууссанview болон онцлог
The FLIPSKY FT85BS V2.0 ESC is a high-performance speed controller designed for various electric applications, including electric skateboards, ebikes, scooters, motorcycles, and robotics. It features robust construction with an aluminum case for efficient heat dissipation and advanced control capabilities.
Гол онцлогууд:
- CPU: AT32F403ARCT7 with ARM Cortex-M4 structure, 240MHz clock speed, max PWM switching frequency 45KHz.
- Хяналтын горимууд: Supports FOC (Field-Oriented Control) for low noise and smooth starting, and BLDC square wave mode.
- Програмчлах чадвар: Configurable via Flipsky ESC Tool and Flipsky VX4 remote (Firmware Version: VX4_V1.2).
- Бодит цагийн өгөгдөл: Supports real-time data monitoring and fault alerts.
- Adaptive Control: Adaptive variable PWM frequency control.
- Мэдрэгчийн дэмжлэг: Sensor mode (HALL) and sensorless mode (IPDS, HFPI).
- Хамгаалалтын чиг үүрэг: Бага/өндөр ботьtage, over-current, temperature abnormality, MOSFET over-temperature/over-current, battery over-discharge, motor over-temperature.
4. Техникийн үзүүлэлтүүд
| Параметр | Үнэ цэнэ |
|---|---|
| Ботьtage | 14-84V (4-20S) |
| Тасралтгүй гүйдэл | 50V/60A; 75V/50A; 84V/40A (Dependent on mounting, ambient temperature, and air/water circulation) |
| Оргил гүйдэл | 250 А |
| Харилцаа холбооны портууд | USB, CAN, UART |
| Input Signal Support | PPM, UART (compatible with FLIPSKY remote VX4 only), ADC |
| BEC | 5V@1A |
| Motor/Power Wire Size | 12 AWG |
| Size (Including Alu. Case) | L110.5*W55*H30мм |
| Материал | Хөнгөн цагаан |
| Цахилгаан унтраах товчлуур | Улаан |
5. Тохиргоо ба суурилуулалт
5.1 Хайрцагнаас задлах
The FLIPSKY FT85BS V2.0 ESC package typically includes the following components:
- FLIPSKY FT85BS V2.0 ESC
- USB төрөл-C кабель
- Various sensor and adapter wires (e.g., PH2.0-6Pin & ZH1.5-6Pin hall sensor wire adapter, PH2.0-5Pin adapter wire, GH1.25-4Pin wire without connector)
- Зааварчилгааны гарын авлага
5.2 утастай холболт
Carefully connect all necessary wires to the ESC. Refer to the wiring diagram and the following steps:
- Connect the motor phase wires and Hall sensor wires to the corresponding ports on the ESC.
- Connect the power switch button.
- Connect the battery wire (ensure correct polarity).
- Connect the remote receiver.
- Connect any optional accessories such as brake lights, front lights, or horn wires.
For a visual guide on wire connections, please refer to the video below:
5.3 Parameter Settings via Flipsky ESC Tool
To configure the ESC parameters, connect it to a computer using the provided USB cable and the Flipsky ESC Tool software.
- Connect the ESC to your computer via USB.
- ESC-г асаана уу.
- Open the Flipsky ESC Tool software on your computer.
- Click "Connect" to establish communication between the ESC and the tool.
- In the "Motor Setup" tab, set the "Motor Rated Current(A)", "Li-ion Battery Series(S)", and "Cell Cut-Off Voltage" according to your motor and battery specifications.
- Click the "Identification Button" and confirm to proceed with motor parameter identification.
- Review the parameter identification results.
- Navigate to the "Control Setup" tab.
- Switch the "Input Signal Type" to UART (if using a compatible remote like FLIPSKY VX4).
- Choose the "UART Control Mode" and "Extra Interface" options based on your needs (e.g., Current Gear Reverse Brake, Front/Brake Light, Horn).
- Click "Write Setup" to save all configured parameters to the ESC.
For a visual guide on parameter settings, please refer to the video below:
5.4 Програм хангамжийн шинэчлэлт
Regularly updating the ESC firmware ensures optimal performance and access to the latest features. Firmware updates are supported via the Flipsky ESC Tool.
- Connect the ESC to your computer and open the Flipsky ESC Tool.
- Navigate to the "Firmware Update" tab.
- Дэлгэц дээрх зааврыг дагаж хамгийн сүүлийн үеийн програм хангамжийг татаж аваад суулгана уу.
- Ensure the ESC remains powered and connected throughout the update process.
For a visual guide on firmware updates, please refer to the video below:
6. Ашиглалтын заавар
6.1 Асаах/унтраах
The ESC is equipped with a power switch button. Press the button to power the unit on or off. If using a remote, ensure it is paired and configured correctly to control the ESC.
6.2 Speed Gear Levels
The ESC supports multiple speed gear levels: Low, Medium, High, and Reverse. These can typically be adjusted via the connected remote control or configured through the ESC Tool.
6.3 Сэргээх тоормос
The FT85BS V2.0 ESC supports regenerative braking, which converts kinetic energy back into electrical energy to recharge the battery during braking. This feature can be configured in the ESC Tool.
7. Засвар үйлчилгээ
- Regularly inspect all wiring and connections for wear or damage.
- ESC-г цэвэр, тоос шороо, чийгнээс хол байлга.
- Ensure adequate airflow around the ESC for optimal cooling, especially during high-current operation.
- ESC-г хэт өндөр температурт эсвэл нарны шууд тусгалд удаан хугацаагаар өртүүлэхээс зайлсхий.
8. Алдаа засах
Хэрэв та ESC-тэй холбоотой асуудалтай тулгарвал дараах нийтлэг алдааг олж засварлах алхмуудыг анхаарч үзээрэй.
- Эрчим хүчгүй: Check battery connections, power switch, and ensure the battery is charged.
- Мотор эргэхгүй байна: Verify motor phase and sensor wire connections. Re-run motor detection in the Flipsky ESC Tool. Check remote pairing and battery voltage.
- Тогтмол бус зан байдал: Ensure all parameters are correctly set in the Flipsky ESC Tool. Check for loose connections or interference.
- Хэт халалт: Reduce load, improve ventilation, or check motor/battery current limits in the ESC Tool.
- Алдааны кодууд: Refer to the Flipsky ESC Tool for specific error code diagnostics.
9. Баталгаат хугацаа ба дэмжлэг
The FLIPSKY FT85BS V2.0 ESC comes with a 2-month warranty from the date of purchase. For technical support, warranty claims, or further assistance, please contact FLIPSKY customer service or visit their official webсайт.
