DAH Solar 440W Solar Module (B0CPM25LMM)

DAH Solar 440W Solar Module User Manual

Model: 440W Solar Module (B0CPM25LMM)

1. Танилцуулга

This manual provides essential information for the safe and efficient use of your DAH Solar 440W Solar Module. This high-efficiency solar module utilizes advanced N-Type TOPCon cell technology and patented Full Screen design to maximize power generation and minimize maintenance.

Please read this manual thoroughly before installation and operation, and keep it for future reference. For optimal performance and safety, installation should only be carried out by qualified personnel.

2. Аюулгүй байдлын мэдээлэл

WARNING: Improper installation or handling can lead to serious injury or damage to the product.

3. Бүтээгдэхүүн дууссанview

The DAH Solar 440W Solar Module is engineered for high performance and durability. Key features include:

3.1 Бүрэлдэхүүн хэсэг

The DAH Solar 440W Solar Module consists of the following main components:

3.2 Бүтээгдэхүүний зураг

DAH Solar 440W Solar Module

Зураг 1: Урд view of the DAH Solar 440W Solar Module, showcasing its full-screen design and black monocrystalline cells.

Solar Module installed on a balcony

Figure 2: The DAH Solar Module integrated into a balcony railing, demonstrating its suitability for urban solar installations.

Solar Module dimensions and specifications

Figure 3: Visual representation of the solar module's dimensions (172.2 cm x 113.4 cm x 3.2 cm) and key features like 22.02% efficiency, 430W power (note: product is 440W, image might be for a similar model), aluminum frame, and IP68 rating.

TOPCon cell technology diagram

Figure 4: Cross-sectional diagram illustrating the "Tunneling Layer" in TOPCon cell technology, which enhances efficiency by improving electron collection.

4. Тохиргоо ба суурилуулалт

Installation of the DAH Solar Module requires careful planning and adherence to safety guidelines. It is strongly recommended that installation be performed by certified solar professionals.

4.1 Суулгахаас өмнөх шалгах хуудас

4.2 Суурилуулалтын үе шатууд (ерөнхий заавар)

  1. Mounting Structure Preparation: Install the solar module mounting rails securely on the roof or desired surface according to the manufacturer's instructions and local building codes. Ensure proper spacing and alignment.
  2. Модулийн байршил: Carefully lift and place the solar modules onto the mounting rails. Secure them using appropriate clamps or fasteners. Ensure even pressure distribution to avoid stressing the module frame.
  3. Цахилгааны холболтууд:
    • Connect the MC4-compatible cables from the solar module's junction box to the input of your inverter or charge controller.
    • Зөв туйлшралыг (+ -ээс + ба - -ээс - хүртэл) шалгана уу.
    • For series connections, connect the positive terminal of one module to the negative terminal of the next. Up to 33 modules can be connected in series.
    • For parallel connections, connect positive terminals together and negative terminals together. An unlimited number of modules can be connected in parallel.
    • Нуман болон цахилгаан тасрахаас сэргийлж бүх холболтууд нягт, найдвартай байгаа эсэхийг шалгаарай.
  4. Газардуулга: Properly ground the solar module frame and mounting system according to local electrical codes to prevent electrical shock hazards.
  5. Inverter Connection: Connect the output of the inverter to your electrical system or grid, following the inverter manufacturer's instructions and local regulations.
  6. Системийн туршилт: After all connections are made, perform a thorough system test to ensure proper operation and power output.

5. Operating the Solar Module

The DAH Solar Module operates automatically when exposed to sunlight, converting solar energy into DC electricity. This DC electricity is then converted into usable AC electricity by your connected inverter.

6. Засвар үйлчилгээ

Regular maintenance ensures the longevity and optimal performance of your DAH Solar Module. Thanks to its Full Screen technology, cleaning requirements are significantly reduced.

7. Алдаа засах

If you experience issues with your solar module, refer to the table below for common problems and solutions. For complex issues, contact a qualified professional.

АсуудалБоломжит шалтгаанШийдэл
Бага эрчим хүчний гаралтPartial shading on the module. Accumulation of dirt/debris. Faulty inverter. Loose electrical connections.Remove any shading obstructions. Clean the module surface. Check inverter status and error codes. Inspect and secure all electrical connections.
Цахилгаан гаралт байхгүйInverter off or faulty. Disconnected cables. Grid outage.Check inverter power and error indicators. Verify all cables are securely connected. Confirm grid status. Contact professional if issue persists.
Visible Damage to ModulePhysical impact (e.g., hail, falling debris).Do not attempt to repair. Isolate the damaged module from the system. Contact a qualified professional for assessment and replacement.
Overheating (Hot Spots)Sustained partial shading. Defective cell or bypass diode.Ensure no persistent shading. While bypass diodes mitigate this, persistent issues require professional inspection.

8. Техникийн үзүүлэлтүүд

ПараметрҮнэ цэнэ
Загвар440W Solar Module (B0CPM25LMM)
БрэндDAH Solar
Эсийн технологиN-Type TOPCon Monocrystalline Half-Cells
Эсийн тоо108
Хамгийн их хүч (Pmax)440 ватт
Үр ашиг22.02%
Макс. Power Voltage (Vmp)32.9 В DC
Макс. Эрчим хүчний гүйдэл (имп)13.37 А
Нээлттэй хэлхээний ботьtage (Voc)38.4 В DC
Богино залгааны гүйдэл (Isc)13.96 А DC
Хамгийн их Системийн ботьtage1,500 В DC
Хүч чадлын хүлцэл+/- 5 Вт
Хэмжээ (L x W x H)172.2 см х 113.4 см х 3.2 см
Жин22 кг
МатериалХөнгөн цагаан хүрээ
Усны хамгаалалттай үнэлгээIP68
Front Snow Load5,400 PA
Rear Wind Load2,400 PA
Max. Modules in Series33
Max. Modules in ParallelХязгааргүй

9. Баталгаат хугацаа ба дэмжлэг

For warranty information, please refer to the documentation provided at the time of purchase or contact DAH Solar directly. Keep your purchase receipt as proof of purchase.

For technical support, installation inquiries, or troubleshooting assistance beyond this manual, please contact DAH Solar customer service or your authorized dealer.

Үйлдвэрлэгч: DAH Solar

First Available on Amazon.de: 1 оны арванхоёрдугаар сарын 2023

Холбогдох баримт бичиг - 440W Solar Module (B0CPM25LMM)

Урьдчилсанview DAH Solar Full Screen PV Module Installation Manual
Comprehensive installation manual for DAH Solar's Full Screen PV modules, covering electrical installation, safety precautions, climatic conditions, angle selection, and mounting methods.
Урьдчилсанview DAH нарны бүрэн дэлгэцийн PV модулийн хэрэглэгчийн гарын авлага, суурилуулах гарын авлага
Цахилгааны суурилуулалт, аюулгүй байдлын арга хэмжээ, цаг уурын нөхцөл, угсрах аргуудыг багтаасан DAH нарны бүрэн дэлгэцийн PV модулиудын хэрэглэгчийн дэлгэрэнгүй гарын авлага, суурилуулах гарын авлага.
Урьдчилсанview DAH нарны PV модулийг суурилуулах гарын авлага
Энэхүү гарын авлага нь DAH нарны PV модулиудыг аюулгүй, үр дүнтэй суурилуулах цогц удирдамжийг агуулдаг. Энэ нь хамгийн оновчтой гүйцэтгэл, хэрэглэгчийн аюулгүй байдлыг хангахад шаардлагатай аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ, цахилгаан болон механик суурилуулах журам, засвар үйлчилгээний зөвлөмж, харьцах заавар зэргийг багтаасан болно.
Урьдчилсанview DAH нарны DHN-LVWES15-G1 цэнэглэдэг лити-ион батерейны техникийн үзүүлэлтүүд
DAH Solar DHN-LVWES15-G1 цэнэглэдэг лити-ион батерейны системийн нарийвчилсан техникийн үзүүлэлтүүд, үүнд функцууд, хэрэглээний диаграммын тайлбар, гүйцэтгэлийн параметрүүд багтсан болно.
Урьдчилсанview DAH Нарны DHN-LVWES цуврал бага ботьtage Эрчим хүч хадгалах зайны хэрэглэгчийн гарын авлага
DAH Solar DHN-LVWES цувралын бага хэмжээний хэрэглэгчийн гарын авлагаtagГэрийн болон бизнесийн эрчим хүчний найдвартай шийдлүүдийн суурилуулалт, ашиглалт, засвар үйлчилгээ, аюулгүй байдлын зааварчилгааг нарийвчлан харуулсан эрчим хүч хадгалах зай.
Урьдчилсанview DAH Solar PV Modules Installation Manual - Comprehensive Guide
Detailed installation manual for DAH Solar PV modules, covering safety, mechanical, electrical installation, maintenance, and handling procedures. Includes product specifications and load information.