ROBOTIME ST003 & MC801 Wooden Puzzle Instruction Manual

Танилцуулга

Thank you for choosing the ROBOTIME ST003 Globe and MC801 Vintage Car wooden puzzles. These kits provide an engaging and rewarding assembly experience, resulting in detailed display models. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure a successful build and lasting enjoyment of your models.

Аюулгүй байдлын анхааруулга:

• Энэ бүтээгдэхүүн нь жижиг хэсгүүдийг агуулдаг бөгөөд амьсгал боогдох эрсдэлтэй тул 3-аас доош насны хүүхдэд тохиромжгүй.
• Угсрах явцад насанд хүрэгчдийн хяналт тавихыг зөвлөж байна.
• Handle wooden pieces carefully to avoid splinters.

Багцын агуулга

Before beginning assembly, please verify that all components are present. Each kit typically includes:

• Pre-cut wooden sheets with puzzle pieces.
• Instruction booklet with detailed diagrams.
• Sandpaper for smoothing edges.
• Small accessories (e.g., wires, LED components for ST003, if applicable).
• Wax or glue (if required for specific joints).

If any parts are missing or damaged, please contact ROBOTIME customer support.

Тохируулах, угсрах заавар

Assembly of these wooden puzzles requires patience and attention to detail. Follow the included instruction booklet specific to your model (ST003 or MC801) for step-by-step guidance.

1. Бэлтгэл: Unpack all components. Identify the wooden sheets and the instruction booklet. Prepare a clean, well-lit workspace.
2. Хэсэг таних: Carefully punch out the wooden pieces from their sheets. Refer to the diagrams in the instruction booklet to identify each piece by its number. Keep similar pieces grouped to avoid confusion.
3. Ирмэгийг тэгшлэх: Use the provided sandpaper to gently smooth any rough edges or burrs on the wooden pieces. This ensures a better fit and prevents splinters.
4. Угсрах алхамууд: Follow the numbered steps in the instruction booklet precisely. Pay close attention to the orientation of each piece.
5. Холбох хэсгүүд: Pieces are designed to interlock. Apply gentle, even pressure when connecting them. If a piece is difficult to fit, do not force it. Recheck the piece number and orientation. A small amount of wax (if provided) can be applied to pegs for smoother insertion.
6. Electrical Components (ST003 Globe): If your ST003 Globe model includes LED lighting, follow the specific wiring instructions carefully. Ensure correct polarity and secure connections.
7. Эцсийн мэдрэгч: Once assembly is complete, ensure all pieces are securely in place. The models are designed for display.

Ашиглалтын заавар

The ROBOTIME ST003 Globe and MC801 Vintage Car are primarily static display models, with the ST003 Globe having an additional functional element.

• MC801 Vintage Car: This model is designed for display. Its wheels may turn, but it is not intended for active play or motorized movement.
• ST003 Globe: If your model includes an electrical lighting component, connect it to a suitable power source (e.g., USB cable, battery pack as specified in its individual manual). The globe will illuminate, enhancing its visual appeal. Some models may also feature a manual rotation mechanism for the globe.

Засвар үйлчилгээ

Proper care will help preserve the appearance and integrity of your wooden puzzle models.

• Цэвэрлэгээ: Dust the models regularly with a soft, dry cloth or a soft brush. Avoid using water or chemical cleaners, as these can damage the wood.
• Хадгалах: Display the models in a stable environment, away from direct sunlight, extreme temperatures, and high humidity. These conditions can cause the wood to warp, crack, or fade.
• Харьцуулах: Handle the models gently, especially when moving them, to prevent pieces from detaching or breaking.

Алдааг олж засварлах

Encountering issues during assembly is common. Here are solutions to frequent problems:

• Pieces Not Fitting: Double-check the piece number and orientation against the instruction diagrams. Ensure no burrs are present; use sandpaper to smooth edges if necessary. Do not force pieces.
• Broken Pieces: If a piece breaks during removal from the sheet or assembly, a small amount of wood glue can often repair it. Allow sufficient drying time. Contact support if a critical piece is irreparably damaged.
• Сул үе: For joints that are too loose, a tiny drop of wood glue can be used to secure them. Apply sparingly to avoid excess.
• ST003 Light Not Working: Verify that the power source is correctly connected and functional. Check all wiring connections for secure contact and correct polarity. Ensure the LED components are inserted correctly.

Үзүүлэлтүүд

Баталгаат хугацааны мэдээлэл

ROBOTIME products are manufactured with quality and precision. For specific warranty details regarding your wooden puzzle kit, please refer to the documentation included in your package or visit the official ROBOTIME website. Typically, warranties cover manufacturing defects. Damage due to improper assembly or handling is generally not covered.

Дэмжлэг

If you require assistance with assembly, have questions about missing parts, or need further troubleshooting, please contact ROBOTIME customer support through the following channels:

• Webсайт: Visit the official ROBOTIME webТүгээмэл асуултууд болон холбоо барих маягтуудын сайт.
• Имэйл: Refer to your product packaging or the ROBOTIME webхарилцагчийн үйлчилгээний имэйл хаягийн сайт.
• Жижиглэн худалдаалагч: If purchased from a specific retailer, their customer service may also be able to assist.

When contacting support, please provide your product model number (ST003 or MC801) and a clear description of the issue.