Танилцуулга
The Micro-Mark Brush-On Thinner is a professional-grade solution designed to adjust the consistency of water-based acrylic paints for smooth application in model painting and crafting. This 8 oz bottle provides a reliable method for achieving desired paint flow and effects.
Зураг: Урд view of the Micro-Mark Brush-On Thinner 8 oz bottle.
Аюулгүй байдлын мэдээлэл
CAUTION: Eye Irritant. Avoid contact with eyes. In case of contact, flush thoroughly with water. Keep out of reach of children. Use in a well-ventilated area. Shake well before use.
Image: Back label of the thinner bottle, displaying safety information and usage instructions.
Тохиргоо ба бэлтгэл
- Сайн сэгсэрнэ үү: Before each use, shake the bottle thoroughly to ensure the thinner is properly mixed.
- Ажлын байраа бэлд: Ensure your work area is clean, well-lit, and adequately ventilated. Protect surfaces from spills.
- Материал цуглуулах: Have your water-based acrylic paints, brushes or airbrush, mixing palette, and a clean container for thinning ready.
Image: The Micro-Mark Thinner bottle positioned next to a model structure and small measuring cups, indicating preparation for use.
Ашиглалтын заавар
This thinner is designed for use with water-based acrylic paints to achieve optimal consistency for various painting techniques.
1. Thinning for Brush Application
- Dispense Paint: Place a small amount of your acrylic paint onto a mixing palette.
- Add Thinner: Using the precision dispensing cap, add a few drops of Micro-Mark Brush-On Thinner to the paint. Start with a small amount and add more gradually.
- Сайтар холино: Mix the paint and thinner using a brush or stirring tool until the desired consistency is achieved. The goal is a smooth, even flow without excessive transparency.
- Туршилт: Before applying to your model, test the thinned paint on a scrap piece to ensure the consistency and coverage are as desired.
Image: Thinner being carefully dispensed into a small measuring cup.
Image: A brush mixing paint with thinner on a small palette to achieve desired consistency.
2. Thinning for Airbrush Application
While primarily a brush-on thinner, it can be used to adjust acrylics for airbrushing. However, specific airbrush thinners may offer superior performance for very fine atomization.
- Initial Thinning: Begin by thinning your acrylic paint as described for brush application, aiming for a milk-like consistency.
- Нэмэлт тохируулга: If needed, add more thinner in very small increments until the paint flows smoothly through your airbrush without clogging.
- Туршилтын шүршигч: Always test spray on a scrap surface to verify proper atomization and flow before applying to your final project.
Image: A brush applying thinned paint to the textured surface of a model, demonstrating smooth coverage.
Бүтээгдэхүүн дууссанview Видео
Видео: Дууслааview of the Micro-Mark Acrylic Paint Thinner, demonstrating its use and benefits for model painting. This video is provided by Maker Source.
Засвар үйлчилгээ, хадгалалт
- Cap Tightly: Always replace the cap securely after each use to prevent evaporation and contamination.
- Зөв хадгалах: Store the thinner in a cool, dry place, away from direct sunlight and extreme temperatures.
- Цэвэр хэрэгсэл: After thinning and painting, clean your brushes and airbrush immediately with water or appropriate cleaning solutions to prevent paint from drying and hardening.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Paint is too thick after thinning. | Insufficient thinner added. | Add thinner in small increments and mix thoroughly until desired consistency is reached. |
| Paint is too thin or transparent. | Too much thinner added. | Add more unthinned paint to the mixture to increase opacity and thickness. |
| Thinner does not work with enamel paints. | Product is specifically for water-based acrylics. | This thinner is not compatible with enamel paints. Use an appropriate thinner designed for enamel paints. |
| Paint dries too quickly on brush/airbrush. | Environmental factors (heat, low humidity) or paint type. | Work in a cooler, more humid environment if possible. Consider using a paint retarder if drying speed is a persistent issue. |
Үзүүлэлтүүд
- Брэнд: Микро Марк
- Загварын нэр: Brush-on Thinner
- Загварын дугаар: 29265
- Хэмжээ: 8 унц (1 ширхэгтэй савлагаатай)
- Барааны хэмжээ: 200 миллилитр
- Paint Type Compatibility: Acrylic (Water-based)
- Онцлог шинж чанар: Хоргүй
- Барааны маягт: Шингэн
- Дотор/гадаа ашиглах: Дотор
- Бүтээгдэхүүний хэмжээ: 2 x 2 x 6 инч
- Барааны жин: 9.6 унц
- UPC: 810096457851
Баталгаат болон дэмжлэг
Specific warranty information for this product is not provided in the available documentation. For product support, inquiries, or further assistance, please contact Micro-Mark customer service directly or visit their official webсайт.
Үйлдвэрлэгч: Микро Марк
Webсайт: www.micromark.com