1. Танилцуулга
This manual provides essential information for the proper installation, operation, and maintenance of your Firehawk FHN250BB Mains Powered Optical Multi-Criteria-Enhanced Smoke Alarm. Please read these instructions thoroughly before installation and retain for future reference. This device is designed to detect smoke and provide an early warning of fire, contributing to household safety.
Зураг 1.1: Дээрээс доош view of the Firehawk FHN250BB Smoke Alarm, showing its compact, white circular design with ventilation slots.
2. Аюулгүй байдлын мэдээлэл
It is crucial to adhere to all safety guidelines during installation and operation. Failure to do so may result in improper functioning of the alarm or electrical hazards.
- Цахилгааны аюулгүй байдал: Installation must be carried out by a qualified electrician in accordance with local wiring regulations. Always isolate the mains power supply before commencing any work on the alarm.
- Байршил: Install smoke alarms in all living areas, hallways, and bedrooms. Avoid placing alarms in kitchens, bathrooms, or garages where steam, cooking fumes, or exhaust gases could cause nuisance alarms.
- Харилцан холболт: If interlinking multiple alarms, ensure compatibility. This unit may not be compatible with wired interconnects from other brands.
- Туршилт: Test the alarm weekly and after any power outage or battery replacement.
- Засвар үйлчилгээ: Do not paint the alarm. Keep it clean and free from dust.
Image 2.1: The Firehawk FHN250BB Smoke Alarm displaying regulatory compliance marks including UKCA, CE, and TÜV Rheinland Certified logos.
3. Багцын агуулга
Суулгаж эхлэхээс өмнө бүх зүйл багцад байгаа эсэхийг шалгаарай:
- Firehawk FHN250BB Smoke Alarm Unit
- Суурилуулах суурь хавтан
- Бэхэлгээний эрэг болон ханын бөглөө
- Alkaline AAA Batteries (for backup)
- Хэрэглэх заавар (энэ баримт бичиг)
Image 3.1: Contents of the Firehawk FHN250BB package, showing the smoke alarm unit, a pack of AAA batteries, and two sets of mounting screws with wall plugs.
4. Тохиргоо ба суурилуулалт
Чухал: Installation must be performed by a competent person, such as a qualified electrician, and comply with all national and local electrical codes.
- Тусгаарлах хүч: Before starting, ensure the mains power supply to the circuit where the alarm will be installed is switched off at the consumer unit.
- Байршлыг сонгох: Choose a suitable location on the ceiling, away from corners, light fittings, and air vents. Refer to local regulations for specific placement guidelines.
- Суурийн хавтан суурилуулах: Use the provided screws and wall plugs to securely fix the mounting base plate to the ceiling.
- Утасны холболтууд: Connect the mains wiring (Live, Neutral, and Interconnect if applicable) to the terminals on the base plate. Ensure correct polarity and secure connections. The base plate features easy-connect terminals.
Зураг 4.1: Нарийвчилсан view of the Firehawk smoke alarm base plate, highlighting the 'L' (Live), 'I' (Interconnect), and 'N' (Neutral) wiring terminals for mains connection.
- Батерейг суулгах: Insert the alkaline AAA backup batteries into the battery compartment on the alarm unit. Ensure correct orientation.
- Дохиоллын төхөөрөмжийг хавсаргах: Align the alarm unit with the base plate and twist clockwise until it clicks securely into place.
- Эрчим хүчийг сэргээх: Switch the mains power supply back on. The alarm should emit a short beep and the LED indicator will illuminate, signifying it is receiving power.
- Туршилтын дохиолол: Press and hold the test button on the alarm unit for a few seconds. The alarm should sound loudly. If it does not, refer to the troubleshooting section.
5. Ашиглалтын заавар
The Firehawk FHN250BB operates continuously once installed and powered. It features a test button and a silence function.
5.1. Хэвийн ажиллагаа
During normal operation, the green LED indicator will flash approximately every 45 seconds, indicating that the alarm is receiving mains power and functioning correctly. The red LED will flash briefly during the self-test cycle.
5.2. Дохиоллыг турших
Press and hold the large central test button on the alarm cover for at least 5 seconds. The alarm will sound a loud, pulsating signal. Release the button to stop the alarm. Test the alarm weekly to ensure proper functionality.
5.3. Silence Function (Hush Mode)
In the event of a nuisance alarm (e.g., from cooking fumes), press the test/hush button. This will silence the alarm for approximately 10 minutes. The red LED will flash every 10 seconds during the hush period. The alarm will automatically reset after 10 minutes. If the smoke is still present, the alarm will sound again.
6. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны утаа мэдрэгчийн удаан эдэлгээ, найдвартай байдлыг баталгаажуулдаг.
6.1. Зай солих
The FHN250BB uses alkaline AAA batteries for backup power. When the batteries are low, the alarm will chirp approximately every 45 seconds, and the red LED will flash. Replace all batteries immediately with new, high-quality alkaline AAA batteries (e.g., McNair LR03, Duracell MN2400, or Reiden LR03 AAA batteries).
- Isolate mains power to the alarm circuit.
- Gently twist the alarm unit counter-clockwise to remove it from the base plate.
- Зайны тасалгааг онгойлгож, хуучин батерейг салга.
- Insert new AAA alkaline batteries, ensuring correct polarity.
- Reattach the alarm unit to the base plate by twisting clockwise until secure.
- Restore mains power and test the alarm.
Image 6.1: The underside of the Firehawk smoke alarm, revealing the battery compartment with a spring mechanism and a label detailing battery replacement instructions and manufacturing dates.
6.2. Цэвэрлэгээ
Clean the smoke alarm at least once a month. Use a soft brush attachment on your vacuum cleaner to remove dust and debris from the alarm's vents and cover. Do not use cleaning solvents or spray chemicals directly onto the alarm.
7. Алдаа засах
If your smoke alarm is not functioning as expected, consult the following table:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Сэрүүлэг 45 секунд тутамд дуугардаг | Бага нөөц батарей | Replace alkaline AAA batteries (refer to Section 6.1). |
| Туршилтын үеэр дохиолол дуугарахгүй байна | No mains power, flat backup batteries, or faulty unit | Check mains power supply. Replace backup batteries. If problem persists, contact support. |
| Таагүй дохиолол | Steam, cooking fumes, dust, or insects | Press hush button. Relocate alarm if consistently triggered by non-fire sources. Clean alarm (refer to Section 6.2). |
| Alarm unit not securing to base plate | Буруу байрлал эсвэл саад тотгор | Ensure correct alignment and twist firmly until it clicks. Check for any obstructions. |
8. Техникийн үзүүлэлтүүд
- Загварын дугаар: FHN250BB
- Эрчим хүчний эх үүсвэр: 230V ~ 50Hz Mains Powered with Alkaline Battery Backup
- Зайны төрөл: 3 x AAA шүлтлэг (оруулсан)
- Мэдрэгчийн төрөл: Optical Multi-Criteria-Enhanced
- Хэмжээ: 5.5 x 11.3 x 5.5 см
- Жин: 200 гр
- Ашиглалтын температур: 0 хэмээс 40 хэм хүртэл
- Чийгшил: 10% -аас 90% RH (конденсацгүй)
- Зөвшөөрөл: EN 14604:2005, CE, UKCA
9. Баталгаат хугацаа ба дэмжлэг
Firehawk products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty details, including duration and terms, please refer to the documentation supplied with your product or visit the official Firehawk website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Firehawk customer service through their official channels.
Холбоо барих мэдээлэл: Refer to the product packaging or the official Firehawk webхамгийн сүүлийн үеийн холбоо барих мэдээллийг авах сайт.