Танилцуулга
This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your ABAC Monte Carlo OSS 20P Air Compressor. Please read these instructions carefully before using the compressor to ensure proper function and to prevent injury or damage.
The ABAC Monte Carlo OSS 20P is an oil-free, soundproof air compressor designed for both DIY and professional applications. It features a 2 HP motor, a 50-liter tank capacity, and delivers an air flow of 222 liters per minute at a maximum pressure of 10 bar. Its low noise level of 72 dBa makes it suitable for various environments.
Image 1: ABAC Monte Carlo OSS 20P Air Compressor, showing its blue tank, black motor housing, wheels, and pressure gauges.
Аюулгүй ажиллагааны зааварчилгаа
Цахилгаан цочрол, гал түймэр, ноцтой гэмтэл бэртлийн эрсдэлийг бууруулахын тулд дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.
- Цахилгааны аюулгүй байдал: Ensure the compressor is connected to a properly grounded outlet with the correct voltage (230 Volts). Do not use extension cords unless absolutely necessary and ensure they are rated for the compressor's power requirements.
- Даралтын аюулгүй байдал: Never exceed the maximum operating pressure of the compressor or the tools connected to it. Do not tamper with the safety valve. Always drain condensation from the tank regularly to prevent corrosion and maintain tank integrity.
- Хувийн хамгаалах хэрэгсэл (PPE): Wear appropriate eye protection (safety glasses) and hearing protection (earplugs or earmuffs) when operating the compressor.
- Агааржуулалт: Operate the compressor in a well-ventilated area to prevent overheating and ensure proper air intake.
- Тогтвортой байдал: Place the compressor on a stable, level surface to prevent tipping during operation.
- Хүүхдүүд ба ажиглагчид: Хүүхэд болон хажууд байгаа хүмүүсийг ажиллаж байгаа компрессороос хол байлга.
- Засвар үйлчилгээ: Disconnect the compressor from the power supply and release all air pressure before performing any maintenance or adjustments.
Image 2: Electrical Hazard Symbol, indicating a warning about potential electrical shock.
Тохиргоо
- Савлах: Компрессорыг савлагаанаас нь болгоомжтой салга. Тээвэрлэлтийн явцад учирсан эвдрэл байгаа эсэхийг шалгана уу. Аливаа эвдрэлийг нийлүүлэгчид нэн даруй мэдэгдээрэй.
- Байршил: Position the compressor on a firm, level surface in a clean, well-ventilated area. Ensure there is adequate space around the unit for air circulation.
- Дугуй угсралт (хэрэв урьдчилан угсраагүй бол): Attach the wheels and handle according to the diagrams in the separate assembly guide (if provided). Ensure all fasteners are securely tightened.
- Цахилгааны холболт: Connect the power cord to a grounded 230V, single-phase electrical outlet. Verify that the power supply matches the specifications on the compressor's data plate.
- Анхны шалгалт: Before first use, ensure all connections are secure and the drain valve at the bottom of the tank is closed.
Ашиглалтын заавар
- Компрессорыг асаах: Plug the compressor into the power outlet. Turn the power switch to the "ON" position. The compressor will start to build pressure.
- Хяналтын даралт: Observe the pressure gauges. One gauge shows the tank pressure, and the other shows the regulated outlet pressure. The compressor will automatically shut off when the maximum tank pressure is reached and restart when the pressure drops.
- Гаралтын даралтыг тохируулах: Use the pressure regulator knob to set the desired working pressure for your air tools. Turn clockwise to increase pressure, counter-clockwise to decrease.
- Агаарын хэрэгслийг холбох: Attach your air hose to the quick-connect coupler on the compressor. Connect your air tool to the other end of the hose.
- Унтрааж байна: When finished, turn the power switch to the "OFF" position. Disconnect air tools and hoses. Slowly open the drain valve at the bottom of the tank to release all remaining air pressure.
Засвар үйлчилгээ
Regular maintenance ensures the longevity and optimal performance of your compressor. Always disconnect power and release all air pressure before performing maintenance.
- Ус зайлуулах конденсац (өдөр бүр/хэрэглэлт бүрийн дараа): Open the drain valve located at the bottom of the air tank to release accumulated moisture. This prevents rust and extends tank life. Close the valve securely after draining.
- Clean Exterior (Regularly): Wipe down the compressor's exterior with a damp Тоос шороо, хог хаягдлыг арилгахын тулд даавуугаар арчина. Хүчтэй химийн бодис эсвэл зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй.
- Air Filter Inspection (Monthly): Check the air intake filter for dirt and blockages. Clean or replace the filter as necessary to ensure proper air intake and prevent motor strain.
- Тосгүй дизайн: This compressor features an oil-free pump, eliminating the need for oil changes or oil level checks.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Компрессор асахгүй байна. | Цахилгаангүй, автомат таслуур тасарсан, унтраалга эвдэрсэн. | Check power connection, reset circuit breaker, contact service if switch is faulty. |
| Компрессор байнга эсвэл байнга ажилладаг. | Air leak in tank or hose, faulty pressure switch. | Check all connections for leaks, tighten fittings. If problem persists, contact service. |
| Гаралтын хэсэгт агаарын даралт бага байна. | Regulator set too low, air leak, clogged air filter. | Adjust regulator, check for leaks, clean/replace air filter. |
| Хэт их чимээ шуугиан эсвэл чичиргээ. | Loose components, compressor not on level surface. | Check and tighten all visible fasteners. Ensure compressor is on a stable, level surface. |
Үзүүлэлтүүд
| Онцлог | Үнэ цэнэ |
|---|---|
| Загварын дугаар | Monte Carlo OSS 20P 1129741059 |
| Брэнд | ABAC |
| Моторын хүч | 2 HP |
| Компрессорын төрөл | Soundproof, Oil-free |
| Танкны багтаамж | 50 литр |
| Air Flow (Delivery) | 222 литр / минут |
| Хамгийн их даралт | 10 бар |
| Ботьtage | 230 вольт |
| Үе шат | Нэг фазын |
| Дуу чимээний түвшин | 72 дБа |
| Зүйлийн жин | 33.7 кг |
Баталгаат болон дэмжлэг
For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer.
Сэлбэг хэрэгслийн бэлэн байдал: Information regarding spare parts availability is currently unavailable. Please contact your supplier for further details.
Regulatory Contact Details (GPSR):
- Legal Name: AIRE COMPRIMIDO INDUSTRIAL IBERIA S.L.
- Contact: SILVIA CLEMENTE - COMERCIAL
- Address: C/ LAS ARENAS, 6 POL. IND. LAS ARENAS – 28320 – PINTO (ESPAÑA)
- Утас: 0034938.225.180
- Email: silvia.clemente@es.airmbc.com
Image 3: Product label showing batch number, expiration date, CE mark, legal name, origin, and GPSR contact details.
