Танилцуулга
This manual provides comprehensive instructions for the setup, operation, and maintenance of your HyperX Cloud III Wireless Gaming Headset and HyperX QuadCast S RGB USB Condenser Microphone. This bundle is designed to provide a superior audio experience for gaming, streaming, and communication across various platforms.
Image: The HyperX Cloud III Wireless Headset and HyperX QuadCast S Microphone, shown together as a complete bundle.
Багцын агуулга
- HyperX Cloud III Wireless Gaming Headset
- Detachable Microphone for Cloud III
- USB утасгүй холбогч
- USB-C цэнэглэгч кабель
- HyperX QuadCast S RGB USB Condenser Microphone
- USB Cable for QuadCast S
- Mount Adapter for QuadCast S (3/8” and 5/8” thread sizes)
- Хурдан эхлүүлэх гарын авлага (энэ гарын авлага)
Тохиргоо
HyperX Cloud III Wireless Headset Setup
- Чихэвчийг цэнэглэх: Connect the USB-C charging cable to the headset's charging port and to a powered USB port. The LED indicator will show charging status. A full charge takes approximately 4.5 hours.
- Төхөөрөмжид холбогдож байна:
- Insert the USB wireless dongle into an available USB port on your PC, PS5, PS4, or Nintendo Switch.
- Power on the headset by pressing and holding the power button. The headset will automatically connect to the dongle.
- For mobile devices, ensure your device supports USB-C audio output or use an appropriate adapter if needed.
- Микрофон залгах: Insert the detachable 10mm microphone into the microphone jack on the headset. Ensure it is securely seated.
Зураг: Ойрын зураг view of the HyperX Cloud III Wireless Headset, highlighting the earcups and the detachable microphone.
HyperX QuadCast S Microphone Setup
- Байршил: Place the QuadCast S microphone on a stable, flat surface using its integrated stand, or attach it to a compatible boom arm using the included mount adapter.
- Төхөөрөмжид холбогдож байна: Connect the USB cable from the QuadCast S microphone to an available USB port on your PC, PS4, PS5, or Mac. The microphone will be automatically recognized by most operating systems.
- Програм хангамж суурилуулах (заавал биш боловч санал болгож байна): For full customization of RGB lighting and other settings, download and install the HyperX NGENUITY software from the official HyperX webсайт.
Зураг: Нарийвчилсан view of the HyperX QuadCast S RGB USB Condenser Microphone, showcasing its design and integrated shock mount.
Ашиглалтын заавар
HyperX Cloud III Wireless Headset Operation
- Асаах/унтраах: Press and hold the power button on the earcup to turn the headset on or off.
- Дууны хяналт: Use the volume wheel located on the earcup to adjust audio output levels.
- Микрофоны дууг хаах: Press the microphone mute button on the earcup to mute or unmute the microphone. An LED indicator on the microphone will show its status.
- Зайны хугацаа: The headset offers up to 120 hours of battery life on a single charge. Monitor battery status via the headset's LED indicator or HyperX NGENUITY software.
- DTS Headphone:X Spatial Audio: Activate and configure DTS Headphone:X Spatial Audio through the HyperX NGENUITY software for enhanced sound localization.
Image: A person wearing the HyperX Cloud III Wireless Headset, illustrating the long battery life and 2.4GHz wireless connectivity for extended gaming sessions.
Image: A person comfortably wearing the HyperX Cloud III Wireless Headset, emphasizing the comfort provided by HyperX signature memory foam and premium leatherette.
HyperX QuadCast S Microphone Operation
- Дуугүй болгохын тулд товшино уу: Tap the top of the microphone to instantly mute or unmute. The LED indicator will change to show the microphone's status (on/off).
- Ашиглалтын хяналт: Use the gain control dial at the bottom of the microphone to adjust input sensitivity.
- Туйлын хэв маяг: Select from four polar patterns (Stereo, Omnidirectional, Cardioid, Bidirectional) using the dial on the back of the microphone to optimize for different recording situations.
- RGB гэрэлтүүлэг: Customize the dynamic RGB lighting effects using the HyperX NGENUITY software.
- Чихэвчний Жак: Use the 3.5mm headphone jack on the back of the microphone for real-time monitoring of your audio.
Image: The HyperX QuadCast S Microphone demonstrating its tap-to-mute sensor with an LED status indicator, showing both active and muted states.
Image: The HyperX QuadCast S Microphone displayed alongside a computer screen showing the HyperX NGENUITY software interface, illustrating customization options for RGB lighting and effects.
Засвар үйлчилгээ
- Цэвэрлэгээ: Use a soft, dry cloth to clean the surfaces of the headset and microphone. Avoid using harsh chemicals or abrasive materials.
- Хадгалах: Төхөөрөмжүүдийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
- Кабель арчилгаа: Avoid sharp bends or kinks in the USB cables to prevent damage.
- Чихний дэр: The ear cushions are designed for durability, but gentle cleaning can extend their lifespan.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Чихэвчнээс аудио байхгүй | Headset not powered on; Dongle not connected; Low battery; Incorrect audio output selected. | Ensure headset is powered on and charged. Verify USB dongle is securely connected. Check audio output settings on your device. |
| Microphone not working (headset) | Микрофон дуугүй байна; Зөв залгагдаагүй байна; Оролтын төхөөрөмж буруу сонгогдсон байна. | Press the mute button to unmute. Re-attach the microphone firmly. Select the headset microphone as the input device in your system settings. |
| QuadCast S microphone not detected | USB cable loose or faulty; Incorrect input device selected; Driver issue. | Ensure USB cable is securely connected. Try a different USB port. Check system sound settings to select QuadCast S as input. Reinstall HyperX NGENUITY software if necessary. |
| Poor audio quality (QuadCast S) | Incorrect polar pattern; Gain too high/low; Environmental noise. | Adjust the polar pattern to suit your recording environment. Adjust the gain control dial. Ensure you are speaking directly into the correct side of the microphone for the selected pattern. |
| RGB lighting not working (QuadCast S) | NGENUITY software not running; Software settings incorrect. | Ensure HyperX NGENUITY software is installed and running. Check lighting settings within the software. |
Үзүүлэлтүүд
HyperX Cloud III Wireless Headset
- Загварын нэр: Үүл III
- Холболт: 2.4GHz Wireless (RF)
- Жолооч нар: 53mm Angled Dynamic Drivers
- Давтамжийн хариу: 10Гц-21кГц
- Зайны хугацаа: 120 цаг хүртэл
- Цэнэглэх хугацаа: Ойролцоогоор 4.5 цаг
- Материал: Memory foam, Leatherette
- Микрофон: Detachable 10mm Noise-Cancelling
- Хяналтын төрөл: Volume Control, Mic Mute
- Тохиромжтой төхөөрөмжүүд: PC, PS5, PS4, Nintendo Switch, Mobile
HyperX QuadCast S RGB USB Condenser Microphone
- Төрөл: USB конденсатор микрофон
- Туйлын хэв маяг: Стерео, бүх чиглэлтэй, кардиоид, хоёр чиглэлтэй
- Онцлогууд: Anti-vibration shock mount, Built-in pop filter, Tap-to-mute sensor with LED indicator, Gain control dial, RGB lighting (customizable via NGENUITY)
- Чихэвчний гаралт: 3.5mm jack for real-time monitoring
- Холбох адаптер: Compatible with 3/8” and 5/8” thread sizes
- Тохиромжтой төхөөрөмжүүд: PC, PS4, PS5, Mac
Баталгаат болон дэмжлэг
HyperX products are backed by a limited warranty. For detailed warranty information, technical support, and customer service, please visit the official HyperX website or contact their support team. Keep your proof of purchase for warranty claims.
Нэмэлт тусламж авахыг хүсвэл зочилно уу: www.hyperx.com/support
