ABUS AZAA10000 Terxon SX Alarm Control Panel User Manual

1. Танилцуулга

This manual provides essential information for the installation, operation, and maintenance of your ABUS AZAA10000 Terxon SX Alarm Control Panel. Please read these instructions carefully before attempting to install or operate the system to ensure proper functionality and safety.

The ABUS AZAA10000 Terxon SX is a wired alarm control panel designed to provide reliable security for your premises. It integrates various security components to detect intrusions and alert users.

2. Аюулгүй байдлын мэдээлэл

• Цахилгааны аюулгүй байдал: Installation and wiring should only be performed by qualified personnel. Disconnect power before servicing the unit.
• Батерейтай харьцах: The system uses a lead-acid battery. Handle with care. Do not short-circuit, puncture, or expose to extreme temperatures. Dispose of batteries according to local regulations.
• Байгаль орчны нөхцөл: Install the control panel in a dry, protected area, away from direct sunlight, extreme temperatures, and high humidity.
• Зөвшөөрөгдсөн хэрэглээ: Use the system only for its intended purpose as an alarm control panel.

3. Багцын агуулга

Бүх бүрэлдэхүүн хэсгүүд багцад байгаа эсэхийг шалгана уу:

• ABUS AZAA10000 Terxon SX дохиоллын хяналтын самбар
• Keypad (LCD control panel)
• Installation hardware (screws, anchors)
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
• Цахилгаан кабель/адаптер
• Lead-acid battery (may be pre-installed or separate)

4. Бүтээгдэхүүн дууссанview

The ABUS AZAA10000 Terxon SX system consists of a main control panel unit and a separate LCD keypad for user interaction.

Зураг 1: ABUS AZAA10000 Terxon SX Alarm Control Panel (right) and LCD Keypad (left). The control panel houses the main electronics and battery, while the keypad provides the interface for arming, disarming, and system configuration.

Зураг 2: Өөр view of the ABUS AZAA10000 Terxon SX Alarm Control Panel and LCD Keypad, highlighting the compact design of the keypad for discreet placement.

4.1 Хяналтын самбар

The main control panel unit is the central processing unit of the alarm system. It manages all connected sensors, communicates with the keypad, and triggers alarms. It typically includes terminals for wired connections, a power input, and a compartment for the backup battery.

4.2 LCD товчлуур

The LCD keypad serves as the primary user interface. It features a display for status messages, a numeric keypad for entering codes, and function buttons for arming, disarming, and accessing system menus. Compatible devices include the LCD control panel, relay board, and optional plug-in relay module.

5. Тохиргоо ба суурилуулалт

Proper setup and installation are crucial for the reliable operation of your alarm system. It is recommended that installation be performed by a certified security technician.

5.1 Хяналтын самбарыг суурилуулах

1. Байршлыг сонгох: Choose a secure, discreet, and centrally located area, preferably indoors, away from extreme temperatures and moisture. Ensure it is accessible for maintenance but not easily tampхамт хийсэн.
2. Аюулгүй суурилуулалт: Use appropriate screws and anchors (type: screw-in) to firmly attach the control panel to a wall. Ensure the mounting surface can support the unit's weight (2.8 kg).

5.2 Товчлуурыг суурилуулах

1. Байршлыг сонгох: Install the keypad near the main entry/exit point of the protected area, at a convenient height for all users.
2. Аюулгүй суурилуулалт: Mount the keypad securely to the wall using the provided hardware.

5.3 утас холболт

The ABUS AZAA10000 Terxon SX is a wired system. All connections (sensors, sirens, power, keypad) must be made using appropriate wiring. Refer to the detailed wiring diagrams provided in the separate installation guide for specific terminal connections.

• Эрчим хүчний холболт: Connect the control panel to a 230 Volt AC power source.
• Зайны холболт: Connect the lead-acid backup battery to the designated terminals inside the control panel.
• Товчлуурын холболт: Connect the keypad to the control panel using the specified wired connection.
• Мэдрэгчийн холболтууд: Connect all wired sensors (e.g., motion detectors, door/window contacts) to the appropriate zone inputs on the control panel.
• Siren/Strobe Connections: Connect external sirens and strobe lights to the alarm outputs.

5.4 Анхдагч асаалт ба тохиргоо

1. Эрчим хүч хэрэглэх: Once all wiring is complete and checked, connect the main power supply.
2. Системийг эхлүүлэх: The system will perform a self-test. Follow the on-screen prompts on the keypad.
3. Program Master Code: Set a unique master user code. This code is essential for system programming and advanced functions.
4. Zone Programming: Configure each connected sensor zone according to its type (e.g., entry/exit, interior, 24-hour).
5. Хэрэглэгчийн кодууд: Create additional user codes for family members or authorized personnel.

6. Ашиглалтын заавар

This section covers the basic daily operation of your ABUS AZAA10000 Terxon SX Alarm Control Panel.

6.1 Системийг зэвсэглэх

• Full Arming (Away Mode): Ensures all zones are active. Enter your user code and press the "Arm" button (or equivalent). The system will provide an exit delay.
• Partial Arming (Stay Mode): Activates perimeter zones while allowing movement within interior zones. Enter your user code and press the "Stay" or "Partial Arm" button.

6.2 Системийг зэвсэггүй болгох

To disarm the system, enter your user code when prompted (e.g., upon entry during the entry delay) or press the "Disarm" button (or equivalent) and then enter your code.

6.3 Alarm Events

When an alarm is triggered, the system will activate sirens (audio) and potentially strobe lights (visual). The keypad display will indicate the triggered zone. To silence the alarm, disarm the system using your user code.

6.4 Системийн төлөв

The LCD keypad displays the current system status, including armed/disarmed state, open zones, and any system faults (e.g., low battery, communication errors).

7. Засвар үйлчилгээ

Regular maintenance ensures the longevity and reliability of your alarm system.

• Зай шалгах: The lead-acid backup battery should be checked periodically (e.g., annually) and replaced every 3-5 years, or when the system indicates a low battery fault.
• Цэвэрлэгээ: Gently wipe the keypad and control panel housing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Мэдрэгчийн туршилт: Periodically test all connected sensors (e.g., motion detectors, door/window contacts) to ensure they are functioning correctly.
• Програм хангамжийн шинэчлэлтүүд: While specific software update information is not available, it is good practice to consult with your installer or ABUS support for any recommended firmware updates.

8. Алдаа засах

This section addresses common issues you might encounter with your ABUS AZAA10000 Terxon SX Alarm Control Panel.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact ABUS technical support or your certified installer.

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацаа ба дэмжлэг

ABUS provides a warranty period of at least 2 жил after purchase for this product, ensuring proper functionality and protection against defects.

Spare parts availability is guaranteed for 1 жил.

For technical assistance, warranty claims, or further information, please contact your authorized ABUS dealer or visit the official ABUS webтуслах нөөцийн сайт.