MONTECH Sky Two GX E-ATX Mid Tower Case User Manual

1. Бүтээгдэхүүн дууссанview

The MONTECH Sky Two GX is an E-ATX Mid Tower Case designed for high airflow performance, featuring a metal mesh front panel and pre-installed PWM ARGB fans. It offers enhanced compatibility and ease of use for PC builders.

Зураг 1.1: Урд view of the MONTECH Sky Two GX Black PC Case with the tempered glass side panel open, showcasing the interior and front mesh panel.

Гол онцлогууд:

• Metal Mesh Front Panel: Ensures optimal airflow and dust protection with up to 51% porosity.
• Enhanced Dimensions: 10mm taller on top for better radiator support and 5mm wider cable management space (25mm total).
• Урьдчилан суулгасан фенүүд: Equipped with three AX140 ARGB PWM fans, supporting up to 11 fans in total.
• Swivel Side Panel: Improves accessibility and simplifies maintenance.
• Multifunctional Side Panel: Supports SSI-EEB motherboards and 2x 2.5-inch SSDs, with quick detachment for fan installation.

Figure 1.2: Diagram illustrating the increased height (10mm) for radiator support and wider cable management space (25mm) in the Sky Two GX compared to previous models.

2. Тохиргоо ба суурилуулалт

This section provides general guidelines for setting up your MONTECH Sky Two GX case. For detailed component-specific instructions, please refer to your component manuals.

2.1 Хэргийг бэлтгэх

1. Кейсийг задлах: Хайрцгийг савлагаанаас нь болгоомжтой салга. Тээвэрлэлтийн явцад ямар нэгэн эвдрэл гарсан эсэхийг шалгана уу.
2. Хажуугийн хавтанг арилгах: The tempered glass side panel swivels open for easy access. The opposite side panel can be removed by unscrewing the thumbscrews.
3. Дагалдах хэрэгслийн хайрцаг: Locate the accessory box inside the case, which contains screws, zip ties, and other installation hardware.

2.2 Бүрэлдэхүүн хэсгүүдийн суурилуулалт

1. Эх хавтанг суурилуулах: Install your E-ATX, ATX, Micro-ATX, or Mini-ITX motherboard onto the standoffs. Ensure proper alignment and secure with screws.
2. Цахилгаан хангамжийн нэгж (PSU) суурилуулах: Install the PSU into its dedicated compartment at the bottom rear of the case.
3. Хадгалах диск суурилуулах:
   • For 2.5-inch SSDs, use the dedicated mounts on the multifunctional side panel.
   • For 3.5-inch HDDs, use the drive cage located near the PSU shroud.
4. График карт (GPU) суурилуулах: Install your GPU into the appropriate PCIe slot. The case supports GPUs up to 400mm in length.
5. Хөргөлтийн системийн суурилуулалт:
   • Фенүүд: The case comes with three pre-installed 140mm ARGB PWM fans at the front. Additional fans can be installed at the top, rear, and bottom. The case supports up to 11 fans.
   • Радиаторууд: The case supports radiators up to 360mm at the top and front.
   • CPU хөргөгч: The case accommodates CPU coolers up to 168mm in height.

Figure 2.1: Internal layout diagram detailing component compatibility, including CPU cooler height, GPU length, PSU clearance, and radiator/fan support locations and sizes.

2.3 Кабелийн менежмент

Utilize the 25mm cable management space behind the motherboard tray and the included zip ties to route and secure cables neatly. This improves airflow and aesthetics.

3. Ашиглалтын заавар

This section covers the basic operation of your MONTECH Sky Two GX case, focusing on its integrated features.

3.1 Урд талын оролт гаралтын самбар

Урд талын I/O самбар нь чухал портууд болон удирдлагад хялбархан нэвтрэх боломжийг олгодог:

• Цахилгаан товч: Press to power on/off your system.
• Дахин тохируулах товч: Системийг дахин эхлүүлэхийн тулд дарна уу.
• USB 3.0 портууд (x2): Тохиромжтой төхөөрөмжүүдтэй өндөр хурдны өгөгдөл дамжуулах зориулалттай.
• USB Type-C порт (x1): Орчин үеийн USB-C төхөөрөмжүүдэд зориулагдсан.
• Аудио залгуурууд: Headphone and microphone jacks for audio peripherals.

Зураг 3.1: Ойрын зураг view of the top I/O panel, highlighting the USB 3.0, USB Type-C, audio ports, and power/reset buttons.

3.2 ARGB сэнсний удирдлага

The pre-installed AX140 ARGB PWM fans offer customizable lighting. The RGB functionality of the front fans is dependent on your motherboard's RGB pins. For full synchronization and control, connect the fan RGB controller to your motherboard's ARGB header.

Refer to your motherboard's manual for specific instructions on controlling ARGB lighting via software.

4. Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны компьютерын хамгийн сайн ажиллагаатай, удаан эдэлгээтэй байдлыг хангахад тусална.

4.1 Цэвэрлэгээ

• Гадна: Зөөлөн ашиглах, damp гаднах гадаргууг арчих даавуу. Зүлгүүрийн цэвэрлэгчээс зайлсхий.
• Тоосны шүүлтүүр: The metal mesh front panel and other filtered areas are designed to be dustproof. Regularly clean these filters to maintain optimal airflow. The front panel features a quick-release mechanism for easy removal and cleaning.
• Дотоод засал: Use compressed air to remove dust from inside the case, especially from fans and heatsinks. Perform this outdoors or in a well-ventilated area.

Figure 4.1: Illustration of the innovative mesh front panel with its quick-release mechanism, designed for superior airflow and easy maintenance.

4.2 Panel Removal and Reinstallation

• Хажуугийн шилэн хавтан: This panel swivels open for convenient access. To fully remove, gently lift it off its hinges when fully open. Reinstall by aligning the hinges and closing the panel until it latches magnetically.
• Steel Side Panel: Loosen the thumbscrews at the rear of the case, then slide the panel backward and lift it off. Reinstall by aligning the panel and securing the thumbscrews.
• Multifunctional Side Panel: This panel can be quickly detached for fan installation or accessing 2.5-inch SSD mounts. Refer to the internal switch for opening/closing.

5. Алдаа засах

This section addresses common issues you might encounter with your MONTECH Sky Two GX case.

5.1 Fans Not Spinning or RGB Not Lighting Up

• Эрчим хүчний холболт: Ensure all fans are properly connected to the motherboard fan headers (PWM) and the fan RGB controller is powered via SATA.
• RGB Connection: Verify that the fan RGB controller is correctly connected to your motherboard's ARGB header (3-pin, 5V).
• Эх хавтангийн програм хангамж: Check your motherboard's RGB control software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to ensure fans are enabled and configured correctly.
• Кабелийн бүрэн бүтэн байдал: Inspect fan cables for any damage or loose connections.

5.2 Агаарын урсгал муу эсвэл өндөр температур

• Тоосжилт: Засвар үйлчилгээний хэсэгт тайлбарласны дагуу бүх тоосны шүүлтүүр болон дотор эд ангиудыг цэвэрлэ.
• Сэнсний чиглэл: Ensure fans are installed with the correct airflow direction (intake/exhaust) for optimal cooling. Front fans typically act as intake, rear and top as exhaust.
• Кабелийн менежмент: Poor cable management can obstruct airflow. Reroute cables to minimize obstruction.
• Бүрэлдэхүүн хэсгүүдийн цэвэрлэгээ: Verify that large components (e.g., CPU cooler, GPU) are not excessively close to case panels or other components, which could restrict airflow.

5.3 Front I/O Ports Not Functioning

• Эх хавтангийн холболтууд: Ensure the front I/O cables (USB 3.0, USB Type-C, HD Audio, Power SW, Reset SW, Power LED, HDD LED) are correctly connected to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.
• Жолоочийн асуудал: For USB ports, ensure your operating system has the latest USB drivers installed.

6. Техникийн үзүүлэлтүүд

7. Баталгаат хугацаа ба дэмжлэг

MONTECH provides a limited warranty for the Sky Two GX PC case. Please retain your proof of purchase for warranty claims.

7.1 Баталгаат хугацааны мэдээлэл

For detailed warranty terms and conditions, please visit the official MONTECH webсайт эсвэл тэдний хэрэглэгчийн дэмжлэгтэй холбогдоно уу.

7.2 Техникийн дэмжлэг

If you encounter any issues not covered in this manual, or require further assistance, please contact MONTECH technical support through their official channels:

• Webсайт: www.montechpc.com
• Имэйл: -д хандана уу webдэмжлэг үзүүлэх имэйл хаягуудын сайт.
• Утас: -д хандана уу webбүс нутгийн холбоо барих утасны сайт.

Please have your product model number (SKYTWOGXB) and proof of purchase ready when contacting support.