Гарын авлага+

Speedlink SL-810008-BK

Speedlink TOKEN RGB Gaming Stereo Speaker

Model: SL-810008-BK

Хэрэглэгчийн гарын авлага

1. Танилцуулга

The Speedlink TOKEN RGB Gaming Stereo Speaker system delivers powerful stereo sound combined with dynamic RGB lighting, enhancing your gaming and multimedia experience. Designed for versatility, it offers both wired and wireless connectivity options, making it suitable for various devices including PCs, laptops, tablets, and smartphones.

This manual provides detailed instructions on setting up, operating, and maintaining your Speedlink TOKEN speakers to ensure optimal performance and longevity.

Speedlink TOKEN RGB Gaming Stereo Speakers with wired remote control.

Image 1: Speedlink TOKEN RGB Gaming Stereo Speakers with wired remote control.

2. Багцын агуулга

Дараах зүйлсийн багцад байгаа эсэхийг шалгана уу.

  • 2 x Speedlink TOKEN RGB Stereo Speakers
  • Integrated Wired Remote Control (attached to speakers)
  • USB-A Power Cable (integrated)
  • 3.5mm Jack Audio Cable (integrated)

3. Тохиргоо

3.1 Физик холболт

  1. Байршил: Place the two speaker units on either side of your monitor or desired listening area. The cable length between satellites is 1.2 meters (2x0.6m), providing flexibility for optimal stereo separation.
  2. Эрчим хүчний холболт: Connect the integrated USB-A cable to an available USB port on your computer, laptop, or a USB power adapter (not included). The speakers are powered via USB.
    3. Diagram indicating the Speedlink TOKEN speakers are USB powered, showing a USB-A connector.

    Image 2: USB Power Connection.

  3. Аудио холболт:
    • 3.5 мм-ийн үүр: For wired audio, connect the integrated 3.5mm audio jack to the audio output port (headphone jack) of your computer, laptop, tablet, or smartphone.
    • Bluetooth: For wireless audio, ensure the speakers are powered on. The speakers will automatically enter Bluetooth pairing mode if no 3.5mm connection is detected or selected.
Diagram illustrating the Speedlink TOKEN speakers' audio modes: Bluetooth for smartphone and tablet, and 3.5mm jack connection.

Image 3: Audio Connection Options (Bluetooth and 3.5mm Jack).

4. Ашиглалтын заавар

The Speedlink TOKEN speakers are controlled via the integrated wired remote control.

Close-up of the Speedlink TOKEN wired remote control, showing volume slider, power button, and lighting mode button.

Image 4: Wired Remote Control.

4.1 Асаах/унтраах ба дууны түвшний хяналт

  • Эрчим хүч: Use the dedicated power button on the wired remote to turn the speakers on or off.
  • Эзлэхүүн: Adjust the volume using the rotary dial or slider on the wired remote.

4.2 Switching Audio Input (Jack / Bluetooth)

The wired remote control features a button to switch between the 3.5mm jack input and Bluetooth input. Press this button to toggle between the two modes.

4.3 Bluetooth холболт

  1. Ensure the speakers are powered on and the Bluetooth input mode is selected (indicated by an LED on the remote).
  2. Bluetooth-тэй төхөөрөмж (ухаалаг утас, таблет, зөөврийн компьютер) дээрээ Bluetooth тохиргоо руу очно уу.
  3. хайх available devices. The speakers should appear as "Speedlink TOKEN" or similar.
  4. Select the speakers to pair. Once paired, the Bluetooth indicator on the remote will stabilize, and you can play audio wirelessly.

4.4 RGB гэрэлтүүлгийн горим

The Speedlink TOKEN speakers feature six different RGB lighting modes, including a music-reactive mode. Use the dedicated lighting button on the wired remote to cycle through the modes or to turn the lighting off.

  • Press the lighting button repeatedly to switch between the available RGB effects.
  • One of the modes is a dynamic RGB effect that reacts to the music/sound being played.
  • To deactivate the lighting, continue pressing the button until the lights turn off.

Note: The lighting settings may not be retained after the speakers are powered off or disconnected from power. You may need to re-select your preferred lighting mode upon restart.

5. Засвар үйлчилгээ

Тохиромжтой засвар үйлчилгээ нь чанга яригчийн урт наслалт, гүйцэтгэлийг баталгаажуулдаг.

  • Цэвэрлэгээ: Use a soft, dry cloth to wipe the speaker surfaces. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
  • Тоос: Regularly remove dust from the speaker grilles using a soft brush or compressed air.
  • Шингэний нөлөөлөл: Avoid exposing the speakers to liquids. They are not waterproof.
  • Хадгалах: Удаан хугацаагаар ашиглаагүй тохиолдолд чанга яригчийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.

6. Алдаа засах

If you encounter issues with your Speedlink TOKEN speakers, please refer to the following common problems and solutions:

Асуудал Боломжит шалтгаан Шийдэл
Чанга яригчаас дуу гарахгүй.
  • Чанга яригчийг асаагаагүй байна.
  • Дууны хэмжээ хэт бага байна.
  • Буруу аудио оролт сонгогдсон.
  • Audio cable not fully connected.
  • Device volume is muted or low.
  • Ensure speakers are powered on via the remote.
  • Increase volume on the wired remote and your device.
  • Press the input selection button on the remote to switch between Jack and Bluetooth.
  • Ensure the 3.5mm jack is fully inserted into both the speaker remote and your device.
  • Check audio settings on your connected device.
Bluetooth connection is unstable or drops out.
  • Бусад төхөөрөмжүүдийн хөндлөнгийн оролцоо.
  • Device is too far from speakers.
  • Bluetooth driver issues on device.
  • Move speakers closer to the Bluetooth device (within 10 meters).
  • Minimize other wireless devices operating nearby.
  • Try unpairing and re-pairing the speakers.
  • Restart both the speakers and your Bluetooth device.
  • Consider using the 3.5mm jack for a stable wired connection if Bluetooth issues persist.
RGB lighting settings reset after power cycle.
  • This is expected behavior for this model.
  • Re-select your desired RGB lighting mode using the lighting button on the remote each time the speakers are powered on.
Speakers are powered on but no RGB lighting.
  • Lighting is turned off.
  • Press the lighting button on the remote to cycle through modes until lights appear.

7. Техникийн үзүүлэлтүүд

Онцлог Дэлгэрэнгүй
Загварын нэр TOKEN RGB Gaming Speaker
Загварын дугаар SL-810008-BK
Брэнд Хурдны холбоос
Холболтын технологи Auxiliary (3.5mm Jack), Bluetooth
Чанга яригчийн төрөл Мультимедиа
Аудио гаралтын горим Стерео
Хүрээлэн буй орчны дууны сувгийн тохиргоо 2.0
Чанга яригчийн хамгийн их гаралтын чадал 12 ватт
Эсэргүүцэл 4 Ом
Давтамжийн хариу үйлдэл 20000 кГц
Хянагчийн төрөл Алсын удирдлага (утастай)
Онцлог шинж чанарууд Bluetooth, LED Light, RGB
Бүтээгдэхүүний хэмжээ (L x W x H) 8.5 x 8.1 x 16.2 см (3.35 x 3.19 x 6.38 инч)
Зүйлийн жин 700 грамм (1.54 фунт)
USB/Jack Cable Length 1.2 метр (3.94 фут)
Cable Length Between Satellites 1.2 meters (2x0.6m) (3.94 feet)
Эрчим хүчний эх үүсвэр USB-A
Материал Хуванцар
Өнгө Хар

8. Баталгаат хугацаа ба дэмжлэг

8.1 Үйлдвэрлэгчийн баталгаа

The Speedlink TOKEN RGB Gaming Stereo Speaker comes with a Үйлдвэрлэгчийн 2 жилийн баталгаат хугацаа. Энэхүү баталгаа нь ердийн ашиглалтын үед хийгдсэн материал, хийцийн согогийг хамарна. Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.

Баталгаат хугацаа нь буруу ашиглалт, осол, зөвшөөрөлгүй өөрчлөлт, цахилгааны гүйдэл зэрэг гадны шалтгааны улмаас учирсан хохирлыг хамрахгүй.

8.2 Хэрэглэгчийн дэмжлэг

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official Speedlink website or contact their customer support. Refer to the product packaging or Speedlink's official webхамгийн сүүлийн үеийн холбоо барих мэдээллийг авах сайт.

Webсайт: www.speedlink.com