1. Танилцуулга
The YUHANUS 125KHZ RFID ID Cards Keypad Panel is a robust access control system designed for secure entry management. It supports up to 1000 user cards and a unique PIN, offering multiple access methods including ID card, PIN, or a combination of both. Constructed from fire-resistant ABS material, this keypad ensures durability and safety. It features full programming directly from the keypad, an anti-tamper alarm, and supports an external doorbell chime. This manual provides detailed instructions for installation, operation, and maintenance.
2. Аюулгүй байдлын мэдээлэл
- Суулгах, ажиллуулахын өмнө бүх зааврыг анхааралтай уншина уу.
- Ensure power is disconnected before wiring to prevent electrical shock.
- This device is designed for indoor use or protected outdoor environments. Avoid direct exposure to water or extreme weather conditions.
- Only use the specified power supply (DC 12V).
- Төхөөрөмжийг өөрөө задлах эсвэл засах гэж бүү оролдоорой. Үйлчилгээ авахын тулд мэргэшсэн ажилтантай холбогдоно уу.
3. Багцын агуулга
- 1x YUHANUS 125KHZ RFID ID Keypad Panel
- 10x 125KHZ ID Keyfobs
- Суурилуулах эрэг ба ханын залгуур
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
Image: Included 125KHZ ID Keyfobs
4. Бүтээгдэхүүн дууссанview
The keypad panel features a numeric keypad, status indicator LEDs, and a doorbell button. The rear panel includes wiring terminals and an anti-tampунтраалга.
Зураг: Урд view of the Keypad Panel
Image: Keypad Panel with External Doorbell Connection
Image: Anti-Tamper Switch (Internal)
5. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Загварын дугаар | CU-K03 |
| Материал | Акрилонитрил бутадиен стирол (ABS) |
| Хэмжээ (L x W x H) | 4.33 x 2.95 x 0.79 инч |
| Зүйлийн жин | 7 унц (0.2 килограмм) |
| Үйл ажиллагааны ботьtage | DC 12 вольт |
| Хэрэглэгчийн багтаамж | Up to 1000 cards/PINs |
| Картын төрөл | 125KHz ID Cards |
| Онцлог шинж чанарууд | Passcode Unlock, Anti-tamper Alarm, External Doorbell Support |
| Дэлгэцийн төрөл | LCD эсвэл LED |
Зураг: Бүтээгдэхүүний хэмжээсүүд
6. Тохиргоо
6.1 Суурилуулалт
- Choose a suitable mounting location, typically near the door to be controlled. Ensure it is protected from direct weather exposure if installed outdoors.
- Mark the drilling points for the mounting screws using the backplate as a template.
- Шаардлагатай бол цооног өрөмдөж, ханын залгуурыг оруулна.
- Арын хавтанг хананд бэхлээрэй.
6.2 Утас
Чухал: Disconnect all power before performing any wiring connections.
Image: Wiring Terminal Block
Image: Wiring Diagram of the Access Control System
Refer to the wiring diagram above and the terminal block image for connections. Common connections include:
- +12V ба GND: Connect to a DC 12V power supply.
- NO/PUSH, COM, NC: Connect to your electric lock (e.g., magnetic lock, electric strike).
- Нээх: Connect to an exit button.
- BELL, BELL: Connect to an external doorbell chime.
6.3 Анхдагч асаалт
- After completing all wiring, apply DC 12V power to the unit.
- The keypad will emit a beep, and the indicator lights will flash, indicating successful power-up.
- The default Master Code is typically 123456. It is highly recommended to change this immediately after initial setup.
7. Ашиглалтын заавар
7.1 Програмчлалын горим
To enter programming mode: Press * then enter the Master Code (default: 123456) then press #. The red LED will illuminate.
To exit programming mode: Press *. The red LED will turn off.
7.2 Мастер кодыг өөрчлөх
- Програмчлалын горимд орно.
- дарна уу 0.
- Enter your new 6-digit Master Code.
- дарна уу # баталгаажуулах.
- Програмчлалын горимоос гарах.
7.3 Adding User Cards/PINs
The system supports up to 1000 users.
- Програмчлалын горимд орно.
- дарна уу 1 to add a user.
- For Card Only Access: Present the ID card to the keypad. The keypad will beep, and the card is added.
- For PIN Only Access: Enter a 4-6 digit PIN, then press #. Repeat the PIN and press # дахин баталгаажуулна уу.
- For Card + PIN Access: Present the ID card, then enter a 4-6 digit PIN, then press #. Repeat the PIN and press # дахин баталгаажуулна уу.
- To add more users, repeat step 3 or 4.
- Програмчлалын горимоос гарах.
7.4 Deleting User Cards/PINs
- Програмчлалын горимд орно.
- дарна уу 2 to delete a user.
- To Delete by Card: Present the ID card to the keypad. The keypad will beep, and the card is deleted.
- To Delete by PIN: Enter the 4-6 digit PIN, then press #.
- To delete more users, repeat step 3 or 4.
- Програмчлалын горимоос гарах.
7.5 Accessing the Door
Image: User Interacting with Keypad
- Card Only: Present your registered ID card to the keypad. The green LED will flash, and the door will unlock.
- PIN Only: Enter your registered 4-6 digit PIN, then press #. The green LED will flash, and the door will unlock.
- Card + PIN: Present your registered ID card, then enter your 4-6 digit PIN, then press #. The green LED will flash, and the door will unlock.
7.6 Хаалганы хонхны функц
Press the doorbell button (bell icon) on the keypad to activate the external doorbell chime (if connected).
Image: Doorbell Button
7.7 Т-ийн эсрэгampэр Сэрүүлэг
If the keypad is forcibly removed from its mounting location, the built-in anti-tamper switch will trigger a loud alarm. To silence the alarm, re-secure the keypad or enter the Master Code.
8. Засвар үйлчилгээ
- Clean the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Утасны холболтыг элэгдэл, гэмтлийн шинж тэмдэг байгаа эсэхийг тогтмол шалгана.
- Ensure the keypad is securely mounted to prevent accidental tampэринг.
9. Алдаа засах
- Товчлуур хариу өгөхгүй байна: Check power supply connections. Ensure DC 12V is correctly applied.
- Door does not unlock:
- Verify the ID card or PIN is correctly registered.
- Check wiring to the electric lock. Ensure COM, NO/PUSH, NC connections are correct for your lock type.
- Confirm the power supply is adequate for both the keypad and the lock.
- Эсрэг тamper alarm triggers unexpectedly: Ensure the keypad is firmly attached to its mounting surface and the anti-tamper switch is properly engaged.
- Cannot enter programming mode: Double-check the Master Code. If forgotten, a factory reset may be required (refer to advanced programming instructions, not covered in this basic manual).
10. Баталгаат хугацаа ба дэмжлэг
Баталгаат мэдээлэл эсвэл техникийн дэмжлэг авахыг хүсвэл жижиглэн худалдаалагч эсвэл үйлдвэрлэгчтэй шууд холбогдоно уу. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.
