Fender Bassman Reverb Pedal

Танилцуулга

The Fender Bassman Reverb Pedal is designed to provide bass-tuned room and hall reverb effects, enhancing your instrument's tone with depth and space. This pedal incorporates meticulously crafted analog and digital circuits to deliver professional-grade reverb while maintaining low-end clarity. Its compact design makes it suitable for any pedalboard.

Гол онцлогууд

• Bass-tuned room and hall reverb DSP algorithms with analog dry-through.
• Low cut knob and pre-delay switch to maintain signal clarity.
• Дотоод damp control for adjusting the high frequency content of the reverb signal.
• Зөөлөн мэдрэгчтэй шилжүүлж болох жинхэнэ эсвэл буфертай тойрч гарах замтай.
• Side-mounted pad switch to suit active basses.

Тохиргоо

Before connecting the pedal, ensure your amplifier and other effects are powered off. Use high-quality instrument cables for optimal signal integrity.

Холболтууд

1. Басс гитараа холбоно уу ОРОЛТ дөрөө дээрх үүр.
2. -г холбоно уу ГАРЦ дөрөөний үүрийг чинийх рүү ampөргөгчийн оролт.
3. Connect a 9V DC power supply (center-negative) to the 9V DC IN Жак.

Зураг 1: Ар талд view of the pedal with input, output, and power connections.

The rear of the pedal features clearly labeled input, output, and power jacks for easy connection to your instrument and ampнастан.

Үйлдлийн удирдлага

The Bassman Reverb Pedal features intuitive controls for shaping your desired reverb sound. Familiarize yourself with each knob and switch to unlock the pedal's full potential.

Зураг 2: Дээд тал view of the pedal's control layout.

Хутга

• ЦАГ: Adjusts the length of the reverb decay. Turn clockwise for longer, more expansive reverb tails.
• ДОТОО ХАСАХ: Controls the amount of low frequencies removed from the reverb trails. This helps prevent muddiness and maintains bass clarity.
• ТҮВШИН: Sets the overall output volume of the reverb effect.

Шилжүүлэгч

• ТӨРӨЛ: Selects between different reverb algorithms (e.g., Room, Hall). Refer to the description for specific algorithm details.
• ӨМНӨ: Engages or disengages the pre-delay function, which introduces a slight delay between the dry signal and the onset of the reverb. This can add clarity to individual notes.

Дотоод хяналт

• DAMP Хяналт: An internal control that adjusts the high-frequency content of the reverb signal. This allows for fine-tuning the brightness or darkness of the reverb.
• Bypass Switch (True/Buffered): The pedal offers soft-touch switchable true or buffered bypass with trails. This setting can typically be adjusted via an internal switch or specific power-up sequence. Consult the full technical manual for detailed instructions on changing bypass modes.

Side-Mounted Switch

• PAD солих: A side-mounted switch designed to accommodate active basses by providing an input pad, preventing signal overload.

Дөрөөг асаах

The Bassman Reverb Pedal operates on a standard 9V DC power supply (center-negative). Ensure the power supply meets the specified voltage and polarity requirements to avoid damage to the unit.

• Ботьtage: 9 вольт
• Ampарилгах: 100 саяamps (minimum recommended)
• Эрчим хүчний эх үүсвэр: Battery Powered (internal 9V battery) or external DC power supply.

Засвар үйлчилгээ

To ensure the longevity and optimal performance of your Bassman Reverb Pedal, follow these maintenance guidelines:

• Цэвэрлэгээ: Дөрөөний гадна талыг цэвэрлэхийн тулд зөөлөн, хуурай даавуу ашиглаарай. Зүлгүүрийн цэвэрлэгч эсвэл уусгагчаас зайлсхий.
• Хадгалах: Дөрөөг хуурай, сэрүүн газар, нарны шууд тусгал болон хэт өндөр температураас хол хадгална уу.
• Зай солих: If using a battery, replace it when the indicator light dims or the effect performance degrades. Disconnect the input cable when not in use to conserve battery life.
• Холболтууд: Бүх кабелийн холболтын нягтрал болон элэгдлийг үе үе шалгаж байх.

Алдааг олж засварлах

If you experience issues with your pedal, try the following steps:

• Дуугүй: Check all cable connections, power supply, and ensure the pedal is engaged. Test with different cables and power supply if possible.
• Weak/Distorted Sound: Verify the input signal level (especially with active basses and the PAD switch). Check battery life if applicable.
• Хэт их дуу чимээ: Ensure you are using a high-quality, isolated power supply. Check for ground loops in your signal chain.
• Үр нөлөө нь сонирхол татахуйц биш байна: Ensure the footswitch is functioning correctly. If in buffered bypass mode, check the internal bypass setting.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information, technical support, or service inquiries, please refer to the official Fender website or contact your authorized Fender dealer. Keep your purchase receipt as proof of purchase.