UIBI X3 & X7 Jump Starter with Air Compressor User Manual

1. Танилцуулга

Thank you for choosing the UIBI X3 or X7 Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a high-performance tire inflator, a portable power bank, and an emergency LED light. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance for dead batteries, flat tires, and charging needs on the go.

This manual will guide you through the proper use, maintenance, and troubleshooting of your UIBI jump starter. Please read it thoroughly before first use to ensure safe and optimal performance.

2. Аюулгүй байдлын мэдээлэл

Always observe the following safety precautions to prevent injury or damage to the device and your vehicle.

• Бүх зааврыг уншина уу: Before operating the jump starter, read and understand all safety information and operating instructions.
• Нүд хамгаалах: Батерейтай ажиллахдаа хамгаалалтын шил зүүж байгаарай.
• Агааржуулалт: Ensure adequate ventilation when jump starting a vehicle.
• Очноос урьдчилан сэргийлэх: Avoid creating sparks near the battery. Do not smoke or allow open flames near the battery or jump starter.
• Туйлшрал: cl-г холбоно ууamps with correct polarity. Connecting incorrectly can cause damage to the device, battery, or vehicle.
• Хүүхэд ба тэжээвэр амьтад: Төхөөрөмжийг хүүхэд, тэжээвэр амьтдын гар хүрэхгүй газар хадгална уу.
• Хадгалах: Төхөөрөмжийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
• Damaged Device: Do not use the device if it is damaged, cracked, or leaking.
• Цэнэглэж байна: Only charge the device using the provided charging cable and a compatible adapter.
• Усанд өртөх: Төхөөрөмжийг бороо, нойтон нөхцөлд бүү гарга.

3. Багцын агуулга

Таны багцад бүх зүйл байгаа эсэхийг шалгана уу:

• UIBI X3 or X7 Jump Starter
• Ухаалаг холбогч кабель
• Air Hose with Nozzles (for various inflatables)
• USB-C цэнэглэгч кабель
• Хадгалах хайрцаг
• Хэрэглэгчийн гарын авлага

Зураг 3.1: UIBI X3 and X7 Jump Starters shown with all included accessories, including smart jumper cables, air hose, various nozzles, and charging cables, neatly organized in their storage cases.

4. Бүтээгдэхүүн дууссанview

Familiarize yourself with the components of your UIBI jump starter.

Зураг 4.1: The UIBI X3 model, highlighting its digital display for battery level and pressure, and the control buttons for jump start, air compressor, and LED light functions.

Зураг 4.2: The UIBI X7 model, featuring its larger digital display for real-time pressure and battery status, along with intuitive control buttons for various modes.

Гол бүрэлдэхүүн хэсгүүд:

• Дижитал дэлгэц: Shows battery level, air pressure (PSI, BAR, KPA, Kg/cm²), and operational modes.
• Цахилгаан товч: Төхөөрөмжийг асаах/унтраах.
• Горимын товчлуур (M): Switches between air compressor modes (e.g., car, motorcycle, bicycle, ball).
• +/- Товчлуур: Adjusts target air pressure.
• Үсрэлт эхлүүлэх порт: For connecting smart jumper cables.
• Агаарын хоолойн порт: For connecting the air hose.
• USB-A гаралт (QC3.0): Электрон төхөөрөмжийг цэнэглэх зориулалттай.
• Type-C PD45W Input/Output: For charging the jump starter and charging electronic devices.
• LED гар чийдэн: Provides illumination, strobe, and SOS signals.

5. Тохиргоо

Before first use, ensure the jump starter is fully charged.

5.1 Анхны цэнэглэлт

1. Connect the provided USB-C charging cable to the Type-C PD45W port on the jump starter.
2. USB-C кабелийн нөгөө үзүүрийг тохирох USB ханын адаптертай (дагалдахгүй) холбоно уу.
3. The digital display will show the charging progress. Charge until the battery indicator shows full.

Зураг 5.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output.

PD45W цэнэглэгчээр бүрэн цэнэглэхэд ойролцоогоор 2 цаг зарцуулдаг.

6. Operating Instructions (Jump Starter)

Follow these steps to safely jump start your vehicle.

1. Машинаа бэлтгэх: Turn off the vehicle's ignition and all accessories (headlights, radio, A/C). Engage the parking brake.
2. Холбогч кабелийг үсрэлт үүсгэгч рүү холбоно уу: Insert the blue plug of the smart jumper cables into the jump start port on the UIBI device. Ensure a firm connection.
3. Cl холбоно ууampБатерей руу s:
   • -г холбоно уу УЛААН (+) clamp руу эерэг (+) тээврийн хэрэгслийн аккумуляторын терминал.
   • -г холбоно уу ХАР (-) clamp руу сөрөг (-) тээврийн хэрэгслийн аккумуляторын терминал.

   The smart jumper cables will beep if an incorrect connection is detected. Correct the connection before proceeding.
4. Машинаа эхлүүлэх: Нэг удаа clamps are correctly connected and the indicator on the smart cable is solid green (or as per cable indicator), start your vehicle's engine.
5. Cl-г устгаamps: Once the vehicle starts, immediately remove the BLACK (-) clamp first, then the RED (+) clamp from the battery. Disconnect the smart jumper cables from the UIBI device.

Зураг 6.1: The UIBI X7 Jump Starter connected to a car battery, demonstrating the proper setup for jump-starting a vehicle. The display shows '8.8.8' indicating readiness.

Зураг 6.2: The UIBI X3 Jump Starter connected to a car battery, illustrating the connection of the smart clamps to the battery terminals for a quick and safe jump start.

Жич: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

7. Air Compressor Operation

The UIBI jump starter features a built-in air compressor for inflating tires and other inflatables.

1. Агаарын хоолойг холбох: Screw the air hose into the air hose port on the jump starter.
2. Цорго хавсаргах: Select the appropriate nozzle for your item (e.g., Schrader valve for car tires, needle for balls) and attach it to the end of the air hose.
3. Асаах: Press the Power button to turn on the device. The display will show the current pressure.
4. Горимыг сонгох (заавал биш): Press the 'M' (Mode) button to cycle through preset inflation modes (e.g., car, motorcycle, bicycle, ball). Each mode has a default pressure, which can be adjusted.
5. Зорилтот даралтыг тохируулах: Use the '+' and '-' buttons to set your desired pressure.
6. Инфляцийг эхлүүлэх: Press the Power button again to start the air compressor. The display will show the real-time pressure.
7. Автомат унтрах: Тогтмол даралтад хүрмэгц компрессор автоматаар зогсдог.
8. Салгах: Unscrew the air hose from the item and the jump starter.

Зураг 7.1: The UIBI X7 Jump Starter actively inflating a car tire, demonstrating its cordless air compressor function. The display shows the current PSI reading.

Зураг 7.2: The UIBI X3 Jump Starter in use, inflating a car tire. This image highlights the multi-use air pump feature with auto-stop functionality.

8. Power Bank функц

The UIBI jump starter can charge your electronic devices.

1. Төхөөрөмжийг холбох: Use a compatible USB cable (not included) to connect your smartphone, tablet, or other electronic device to either the USB-A (QC3.0) output port or the Type-C PD45W port on the jump starter.
2. Асаах: Press the Power button on the jump starter to activate the charging function.
3. Цэнэглэж байна: Your device will begin charging. The jump starter's display may show its remaining battery level.

Зураг 8.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output, allowing it to function as a portable power bank.

9. LED гэрлийн функц

The integrated LED flashlight offers three modes for various situations.

1. Асаах: Press and hold the LED light button (often integrated with the power button or a dedicated button) to turn on the flashlight.
2. Өөрчлөлтийн горим: Briefly press the LED light button repeatedly to cycle through the modes:
   • Тогтвортой гэрэл: Ерөнхий гэрэлтүүлгийн зориулалттай.
   • Строб гэрэл: Дохио өгөх эсвэл анхаарлыг татах зорилгоор.
   • SOS дохио: For emergency situations, emitting the Morse code SOS pattern.
3. Унтраах: Press and hold the LED light button again to turn off the light.

Зураг 9.1: The UIBI X7 Jump Starter demonstrating its emergency LED light, capable of providing stable illumination, strobe, and SOS signals for various situations.

10. Төхөөрөмжийг цэнэглэж байна

To ensure your UIBI jump starter is always ready, recharge it after each use or when the battery level is low.

• Connect the provided USB-C charging cable to the Type-C PD45W input port on the jump starter.
• Connect the other end of the USB-C cable to a USB wall adapter (e.g., 5V/2A, 9V/2A, or PD45W compatible).
• The digital display will indicate the charging status. Charge until the battery icon shows full.
• It is recommended to fully charge the device every 3-6 months even if not in use to maintain battery health.

11. Засвар үйлчилгээ

Proper maintenance will extend the life of your UIBI jump starter.

• Цэвэрлэгээ: Төхөөрөмжийг зөөлөн, хуурай даавуугаар арчина. Химийн хүчтэй бодис, зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй.
• Хадгалах: Store the device in its carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Батерейны арчилгаа: Recharge the device every 3-6 months to prevent deep discharge and prolong battery life.
• Кабелийн үзлэг: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

12. Алдаа засах

Хэрэв танд асуудал тулгарвал дараах нийтлэг асуудал, шийдлүүдийг үзнэ үү.

Хэрэв эдгээр шийдлүүдийг туршиж үзсэний дараа асуудал хэвээр байвал хэрэглэгчийн дэмжлэгтэй холбогдоно уу.

13. Техникийн үзүүлэлтүүд

14. Баталгаат хугацаа ба дэмжлэг

UIBI products are designed and manufactured to the highest quality standards. For warranty information and customer support, please refer to the warranty card included in your package or visit the official UIBI website. If you have any questions or require assistance, do not hesitate to contact our customer service team.