INSTRUKART Lutron TU-2016 булингар хэмжигч хэрэглэгчийн гарын авлага

1. Танилцуулга

This manual provides detailed instructions for the proper operation, maintenance, and troubleshooting of the INSTRUKART Lutron TU-2016 Turbidity Meter. Please read this manual thoroughly before using the device to ensure accurate measurements and safe operation.

The Lutron TU-2016 is designed for measuring turbidity in various water sources, including lakes, water tanks, rivers, and mangroves. It features a wide measurement range, high resolution, and a user-friendly interface, adhering to ISO 7027 standards.

2. Аюулгүй байдлын мэдээлэл

• Always handle the meter and its components with care to prevent damage.
• Do not expose the device to extreme temperatures, humidity, or direct sunlight for prolonged periods.
• Ensure the battery compartment is properly sealed to prevent water ingress.
• Keep the exterior of the test bottle clean and dry before insertion into the meter.
• Use only specified standard solutions for calibration.
• Батерей болон уусмалыг орон нутгийн дүрэм журмын дагуу хаяна уу.

3. Багцын агуулга

Савыг задлахдаа доор жагсаасан бүх зүйл байгаа бөгөөд сайн нөхцөлд байгаа эсэхийг шалгаарай.

• 1 Unit of TU-2016 Turbidity Meter
• 0 NTU standard solution
• 10 NTU standard solution
• Empty testing bottle (sample cuvette)
• Hard Carrying case
• Зааварчилгааны гарын авлага
• Үйлдвэрийн шалгалт тохируулгын гэрчилгээ

Зураг 3.1: Contents of the TU-2016 Turbidity Meter package, neatly organized within its hard carrying case.

Зураг 3.2: The TU-2016 Turbidity Meter along with its essential accessories for measurement and maintenance.

4. Бүтээгдэхүүн дууссанview

The Lutron TU-2016 Turbidity Meter is a portable, microprocessor-controlled device designed for precise turbidity measurements. Key features include:

• ISO 7027 Compliance: Designed to meet international standards for turbidity measurement.
• Хэмжилтийн хэсэг: NTU (Nephelometric Turbidity Unit).
• Wide Auto Measurement Range: 0-ээс 1,000 NTU хүртэл.
• Өндөр нягтрал: 0.01 NTU (for 0.00 to 50.00 NTU range) and 1 NTU (for 50 to 1,000 NTU range).
• Unique Optics Structure: Enables accurate readings from low to high turbidity levels.
• Хэрэглэгчдэд ээлтэй интерфэйс: Four operation buttons and three calibration points for easy use.
• Jumbo LCD Display: Large display for clear and easy readability.
• Microprocessor Circuit: Ensures maximum accuracy and provides special functions.
• Батерейгаар ажилладаг: Ideal for field and on-site testing.
• Өгөгдөл хадгалах функц: Freezes the displayed value.
• Санах ой санамж: Records and recalls Maximum and Minimum readings.
• Автоматаар унтрах: Зайны ашиглалтын хугацааг хэмнэдэг.
• Бат бөх дизайн: Heavy-duty and compact housing with a hard carrying case.

Зураг 4.1: Урд view of the TU-2016 Turbidity Meter, highlighting the display and control panel.

Зураг 4.2: The TU-2016 Turbidity Meter held in hand, illustrating its compact and portable design.

5. Тохиргоо

5.1 Батерей суурилуулах

The meter operates on six DC 1.5 V AAA (UM4) batteries. To install or replace batteries:

1. Тоолуурын арын хэсэгт зайны тасалгааны тагийг олоорой.
2. Open the cover and insert six AAA batteries, observing the correct polarity (+/-).
3. Зайны тасалгааны тагийг сайтар хаа.

5.2 Анхдагч асаалттай

дээр дарна уу ХҮЧ button to turn on the meter. The LCD display will illuminate and show a brief self-test before entering measurement mode.

6. Ашиглалтын заавар

6.1 Preparing a Sample

1. Ensure the empty testing bottle (cuvette) is clean and dry. Wipe the exterior with a lint-free cloth.
2. Fill the testing bottle with the water sample to be measured. Avoid air bubbles.
3. Securely cap the bottle.

6.2 Хэмжилт хийх

1. s-г нээнэ үүample compartment lid on the top of the meter.


Зураг 6.1: Opening the sampтасалгааны таг.

2. Insert the prepared sample bottle into the compartment, ensuring it is seated correctly.


Зураг 6.2: Оруулж байнаample bottle into the meter.

3. s-г хааampтасалгааны таг.

Зураг 6.3: The meter with the sample compartment open, ready for sample insertion.
4. дээр дарна уу TEST/CAL button to initiate a measurement. The turbidity reading will appear on the LCD display.

6.3 Өгөгдөл хадгалах функц

Дэлгэц дээрх одоогийн заалтыг хөлдөөхийн тулд товчийг дарна уу БАРЬ button. Press it again to release and resume live measurement.

6.4 Memory Recall (MAX/MIN)

The meter can record and recall the maximum and minimum turbidity readings:

• дээр дарна уу REC button once to display the maximum recorded value.
• дээр дарна уу REC button again to display the minimum recorded value.
• дээр дарна уу REC button a third time to exit memory recall mode.

6.5 Автомат унтрах

The meter features an auto shut-off function to conserve battery life. If no button is pressed for a certain period, the meter will automatically power off. This can be manually overridden by pressing the ХҮЧ төхөөрөмжийг унтраах товчийг дарна уу.

7. Шалгалт тохируулга

The TU-2016 features a three-point push-button calibration system. Regular calibration ensures the accuracy of your measurements. Use the provided 0 NTU and 10 NTU standard solutions for calibration.

1. Тоолуурыг асаана уу.
2. Insert the 0 NTU standard solution into the sampтасалгаа.
3. -г удаан дар TEST/CAL button until the calibration mode is indicated on the display. Follow the on-screen prompts to calibrate the 0 NTU point.
4. Remove the 0 NTU solution and insert the 10 NTU standard solution.
5. Repeat the calibration process for the 10 NTU point.
6. The third calibration point (if applicable) can be performed similarly with a higher NTU standard solution if available and required for your specific application.
7. After successful calibration, the meter will return to measurement mode.

Note: Refer to the Factory Calibration Certificate for details on the initial calibration performed by the manufacturer.

8. Засвар үйлчилгээ

8.1 Cleaning the Meter

• Тоолуурын гадна талыг зөөлөн, d-ээр арчинаamp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• s-г хадгалample compartment clean and free of debris.
• Ensure the exterior of the test bottles are always clean and dry before use.

8.2 Хадгалалт

• When not in use, store the meter and its accessories in the provided hard carrying case.
• Нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
• Хэрэв удаан хугацаагаар хадгалах бол гоожихоос сэргийлж батерейг салгаж аваарай.

9. Алдаа засах

10. Техникийн үзүүлэлтүүд

11. Дэмжлэг ба баталгаа

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact INSTRUKART customer support. Refer to your purchase documentation for specific warranty terms and contact information.

The product comes with a Factory Calibration Certificate, ensuring its initial accuracy and compliance with international standards.