1. Танилцуулга
This user manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Debut EVO 2 Audiophile Turntable. The Debut EVO 2 represents the next generation of Pro-Ject's best-selling audiophile turntables, featuring a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge. Designed for longevity, this turntable offers premium vinyl listening experience.
2. Аюулгүй ажиллагааны заавар
Please read these safety instructions carefully before operating your turntable. Keep this manual for future reference.
- Эрчим хүчний хангамж: Зөвхөн төхөөрөмжид дагалдаж ирсэн тэжээлийн адаптерийг ашиглана уу. Боть байгаа эсэхийг баталгаажуулна ууtage нь таны орон нутгийн цахилгаан хангамжтай таарч байна.
- Ус ба чийг: Do not expose the turntable to rain or moisture. Do not place objects filled with liquids, such as vases, on the apparatus.
- Дулааны эх үүсвэрүүд: Do not place the turntable near heat sources such as radiators, heat registers, stoves, or other apparatus (including ampөргөгч) дулаан үүсгэдэг.
- Агааржуулалт: Зөв агааржуулалтыг хангах. Агааржуулалтын нүхийг хааж болохгүй.
- Цэвэрлэгээ: Зөвхөн хуурай даавуугаар цэвэрлэ. Шингэн эсвэл аэрозоль цэвэрлэгч хэрэглэхээс зайлсхий.
- Үйлчилгээ: Do not attempt to service the turntable yourself. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Хүүхдүүд: Хүүхдийн гар хүрэхгүй газар хадгална. Жижиг хэсгүүд нь амьсгал боогдох аюултай.
3. Хайрцагт юу байна
Carefully unpack all items from the packaging. Please ensure all components listed below are present:
- Pro-Ject Debut EVO 2 Turntable Unit
- Transparent Dustcover
- Connection Cable (RCA)
- Эрчим хүчний адаптер
- Alignment Protractor
- Single Adapter (for 45 RPM records with large center hole)
- Плиттер
- Жолоо барих
- Эсрэг жин
- Тэшүүрийн эсрэг жин
4. Тохируулах гарын авлага
Follow these steps to set up your Pro-Ject Debut EVO 2 turntable for optimal performance.
4.1. Байршуулалт ба түвшин тогтоох
Place the turntable on a stable, level surface away from vibrations and direct sunlight. Use a spirit level to ensure the turntable is perfectly horizontal. The adjustable feet can be used for fine-tuning the level.
Image: The Pro-Ject Debut EVO 2 turntable in Satin Steel Blue, showcasing its sleek design and stable base. Proper placement on a level surface is crucial for optimal sound quality.
4.2. Таваг ба хөтлөх бүс суурилуулах
- Carefully place the heavy die-cast aluminum platter onto the spindle.
- Locate the drive belt. Gently stretch the belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
Зураг: Нарийвчилсан view of the turntable's platter and the drive belt mechanism. The belt connects the motor pulley to the sub-platter, ensuring consistent rotation.
4.3. Tonearm Balancing and Tracking Force Adjustment
The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps to balance the tonearm and set the tracking force:
- Зүүг хамгаалагчийг хайрцагнаас салгана.
- Lower the tonearm lift.
- Carefully rotate the counterweight on the rear of the tonearm until the tonearm floats freely and is perfectly balanced horizontally.
- Once balanced, hold the counterweight steady and rotate the tracking force dial (the numbered ring on the front of the counterweight) to '0'.
- Rotate the entire counterweight (including the dial) counter-clockwise until the dial shows the recommended tracking force for the Pick it MM EVO cartridge, which is typically 1.8 grams. Refer to the cartridge specifications for precise values.
Image: A close-up of the tonearm assembly, showing the counterweight and the anti-skate mechanism. Proper adjustment of these components is vital for accurate tracking and sound reproduction.
4.4. Тэшүүрийн эсрэг тохируулга
The anti-skate mechanism prevents the tonearm from being pulled towards the center of the record. The Debut EVO 2 uses a weight-on-string anti-skate system.
- Locate the small anti-skate weight and the anti-skate stub on the tonearm.
- Hang the loop of the anti-skate weight's string over the second groove of the anti-skate stub. This setting is generally suitable for the pre-mounted cartridge.
4.5. Холбогдох нь Ampнастан
Connect the supplied RCA cable from the turntable's output jacks (L and R) to the PHONO input on your amplifier эсвэл phono preamplifier. Ensure the ground wire is connected from the turntable to the ground terminal on your ampилүү урт/өмнөхampдууг багасгахын тулд өргөгч.
Зураг: Нарийвчилсан view of the turntable's rear panel, showing the left (L) and right (R) RCA output jacks, along with the ground terminal. These connections are essential for transmitting the audio signal to an ampнастан.
4.6. Эрчим хүчний холболт
Connect the power adapter to the DC input on the turntable and then plug it into a wall outlet.
4.7. Dustcover Installation
Carefully insert the hinges of the transparent dustcover into the receptacles at the rear of the turntable plinth.
5. Ашиглалтын заавар
5.1. Асаах/унтраах
The turntable is powered on when the power adapter is connected. There is no separate power switch. To turn off, disconnect the power adapter.
5.2. Хурдны сонголт
The Debut EVO 2 features electronic speed selection. Use the switch located on the plinth to select between 33 ⅓ RPM and 45 RPM. For 78 RPM records, a special belt and stylus are required (sold separately), and the speed switch can be set to 78 RPM after installing the appropriate belt.
5.3. Бичлэг тоглуулах
- Бичлэгийг тавган дээр тавь.
- Select the correct playback speed (33 ⅓ or 45 RPM).
- Гараа өргөх хөшүүргийг ашиглан гараа өргө.
- Carefully position the stylus over the lead-in groove of the record.
- Gently lower the tonearm using the tonearm lift lever. The stylus will descend onto the record and playback will begin.
5.4. Тоглуулахыг зогсоох
- At the end of a record, the tonearm will remain in the run-out groove.
- Гараа өргөх хөшүүргийг ашиглан гараа өргө.
- Return the tonearm to its rest and secure it with the tonearm clamp.
- Бичлэгийг тавган дээрээс гаргаж ав.
6. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны эргэлдэгч тавиурын урт наслалт, оновчтой ажиллагааг хангах болно.
6.1. Эргэдэг ширээг цэвэрлэх
- Always disconnect the turntable from the power outlet before cleaning.
- Use a soft, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
- The dustcover can be cleaned with a soft, damp cloth. Avoid harsh chemicals that may scratch or cloud the acrylic.
6.2. Үзэг цэвэрлэх
- Use a dedicated stylus cleaning brush or fluid.
- Always brush the stylus from back to front (from the pivot point towards the tip) to avoid damaging the cantilever.
- Clean the stylus regularly to remove dust and debris that can degrade sound quality and damage records.
Зураг: Ойрын зураг view of the pre-mounted Pick it MM EVO cartridge on the carbon fiber tonearm. Regular cleaning of the stylus is important for maintaining audio fidelity.
7. Алдаа засах
Хэрэв та эргэлдэгч тавцантайгаа холбоотой асуудалтай тулгарвал дараах нийтлэг асуудал болон шийдлүүдийг үзнэ үү.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| No power / No rotation | Power adapter not connected; Power outlet faulty; Drive belt dislodged or broken. | Check power connections; Try a different outlet; Re-seat or replace drive belt. |
| Нэг эсвэл хоёр сувгаас дуу гарахгүй | Cable connection issues; Cartridge wiring loose; Amplifier input incorrect. | Check RCA and ground connections; Verify cartridge wires are secure; Ensure amplifier is set to PHONO input. |
| Гуниглах чимээ | Ground wire not connected; Nearby electronic interference; Faulty cable. | Connect ground wire; Move turntable away from other electronics; Try a different RCA cable. |
| Distorted or skipping sound | Incorrect tracking force; Incorrect anti-skate; Dirty stylus; Damaged record. | Re-adjust tracking force and anti-skate; Clean stylus; Inspect record for damage. |
| Буруу тоглуулах хурд | Буруу хурд сонгосон; Хөдөлгүүрийн бүсний асуудал. | Ensure correct speed (33/45 RPM) is selected; Check drive belt for proper seating. |
If the problem persists after attempting these solutions, please contact Pro-Ject customer support or your authorized dealer for assistance.
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын нэр | Дебут EVO 2 |
| Брэнд | Pro-Ject |
| Бүтээгдэхүүний хэмжээс | 16.4 x 12.6 x 4.5 инч |
| Зүйлийн жин | 13.2 фунт (6 килограмм) |
| Материал | Carbon Fiber (tonearm) |
| Өнгө | Satin Steel Blue (as per current product) |
| Моторын төрөл | Туузан хөтөч |
| Холболтын технологи | Туслах (RCA гаралт) |
| Оруулсан бүрэлдэхүүн хэсгүүд | Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter |
| Хайрцаг | Pre-mounted Pick it MM EVO |
| Плиттер | 1.7kg anti-magnetic die-cast aluminum |
9. Баталгаат хугацаа ба дэмжлэг
Pro-Ject Audio Systems stands behind the quality of its products. The Pro-Ject Debut EVO 2 turntable is designed for longevity and comes with a 25-year spare parts availability guarantee, ensuring that your turntable can be maintained for a lifetime.
For technical support, warranty claims, or further assistance, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webсайт. Худалдан авалтын баримтаа баталгаат хугацаагаар хадгалах.
Та нэмэлт мэдээлэл, тусламжийн эх сурвалжийг эндээс авах боломжтой Амазон дээрх Pro-Ject дэлгүүр.
