Speed Unlimited 600C TFT дэлгэцийн хэрэглэгчийн гарын авлага

Танилцуулга

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the HALLOMOTOR Speed Unlimited 600C TFT Display. This advanced display is designed to seamlessly integrate with various Bafang mid-drive motors, including M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, and M820 models. It utilizes CAN protocol for reliable communication and offers a vibrant TFT screen for clear data monitoring and customizable settings.

Бүтээгдэхүүн дууссанview

HALLOMOTOR 600C TFT Display with CAN Protocol

Зураг 1: Урд view of the HALLOMOTOR 600C TFT Display, showing the screen and control buttons.

HALLOMOTOR 600C TFT Display compatible motors

Figure 2: The 600C TFT Display, highlighting its CAN version and compatibility with Bafang M200, M300, M400, M410, M420, M500, M510, M560, M600, M620, M800, and M820 motors.

HALLOMOTOR 600C TFT Display mounted on handlebars

Figure 3: The 600C TFT Display mounted on bicycle handlebars, demonstrating its 2.4-inch HD screen, multi-language support, multi-mode interface, and IP65 waterproof rating.

HALLOMOTOR 600C TFT Display installed on an e-bike

Figure 4: An installed view of the 600C TFT Display on an electric bicycle, showing its compact design and handlebar mounting.

Тохиргоо ба суурилуулалт

1. Багцын агуулга

600C TFT Display Unit
Mounting Bracket (integrated)
Холболтын кабель

2. Дэлгэц суурилуулах

The 600C TFT Display is designed for handlebar mounting. Ensure the handlebar diameter is compatible with the integrated clamp (approximately Ø22.2mm as per dimensions). Position the display centrally for optimal viewing and access to buttons.

Loosen the mounting screw on the display's integrated clamp.
Place the display on your bicycle's handlebar in the desired position.
Tighten the mounting screw securely, ensuring the display is stable and does not rotate freely. Do not overtighten.

Figure 5: Technical dimensions of the 600C TFT Display, showing measurements in millimeters for width, height, and handlebar clamp diameter (Ø22.2mm).

3. Цахилгааны холболт

Connect the display's cable to the corresponding port on your Bafang mid-drive motor system. Ensure the connectors are clean and dry before mating. The display uses a specific CAN protocol connector (often green, as shown in product images).

Locate the display connection port on your Bafang motor's wiring harness.
Align the male and female connectors of the display cable and the motor harness.
Push firmly until the connectors click into place, ensuring a secure and waterproof seal.
Route the cable neatly along the handlebars and frame, securing it with cable ties to prevent snagging or damage.

Ашиглалтын заавар

1. Display Layout and Buttons

The 600C TFT display features a clear screen and intuitive button layout for easy control.

Power Button (middle): Turns the display and e-bike system on/off.
Дээш товчлуур (+): Increases assist level, navigates menus upwards, or increases values.
Доош товчлуур (-): Decreases assist level, navigates menus downwards, or decreases values.
M Button (Mode): Cycles through display information, enters/exits settings menus.

2. Үндсэн үйл ажиллагаа

Асаах/унтраах: Press and hold the Power button for approximately 2 seconds to turn the system on or off.
Changing Assist Levels: Use the Up (+) and Down (-) buttons to adjust the motor's pedal assist level. The current level will be displayed on the screen.
Cycling Display Information: Press the M button briefly to cycle through various data displays such as speed (current, average, max), distance (trip, total), battery level, and power output.

3. Advanced Settings and Interface Modes

The 600C display supports multiple interface modes and customizable settings. Refer to the on-screen menu for specific options.

HALLOMOTOR 600C TFT Display multiple interface modes

Зураг 6: Жишээ ньamples of multiple interface modes available on the 600C TFT Display, including digital, simulation, basic information, and detailed information views.

Тохиргоонд нэвтрэх: Typically, pressing and holding the M button, or a combination of buttons, will enter the settings menu. Follow the on-screen prompts.
Тохируулга: Within the settings, you may be able to adjust parameters such as wheel diameter, speed unit (km/h or mph), battery voltage, backlight brightness, and password protection.
Интерфейсийн горимууд: The display offers various visual layouts for data presentation. Navigate to the 'Interface Mode' setting to select your preferred view.

Засвар үйлчилгээ

Цэвэрлэгээ: The display is IP65 waterproof. Use a soft, damp дэлгэцийг арчих даавуу болон casing. Avoid abrasive cleaners or solvents. Do not use high-pressure water jets directly on the display.
Хадгалах: When not in use for extended periods, store the display and e-bike in a cool, dry place, away from direct sunlight and extreme temperatures.
Кабелийн үзлэг: Periodically check the display cable and connectors for any signs of wear, damage, or corrosion. Ensure connections remain secure.

Алдааг олж засварлах

Асуудал	Боломжит шалтгаан	Шийдэл
Дэлгэц асахгүй байна.	Low battery, loose connection, system fault.	Check e-bike battery charge. Ensure all cables are securely connected. If problem persists, consult a technician.
No speed or distance data.	Speed sensor issue, loose motor connection.	Check speed sensor alignment and connection. Verify motor connection.
Дэлгэц нь алдааны кодыг харуулж байна.	Системийн эвдрэл.	Note the error code and refer to your motor's manual or contact support for specific meaning and resolution.
Товчнууд хариу өгөхгүй байна.	Temporary software glitch, physical damage.	Try restarting the display (power off and on). Inspect buttons for physical damage.

Үзүүлэлтүүд

Загварын нэр: 600C TFT display with CAN protocol
Брэнд: HALLOMOTOR
Дэлгэцийн төрөл: TFT (Thin-Film Transistor)
Дэлгэцийн хэмжээ: 2.4-inch (HD display screen)
Протокол: CAN (Хянагч бүсийн сүлжээ)
Тохиромжтой байдал: Bafang Mid Drive Motors (M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, M820)
Материал: Хуванцар
Өнгө: Хар
Суурилуулах төрөл: Handlebar Mount (Ø22.2mm)
Усны хамгаалалттай үнэлгээ: IP65
Оруулсан бүрэлдэхүүн хэсгүүд: LCD 600C CAN

Баталгаат болон дэмжлэг

Баталгаат хугацааны мэдээлэл

This product comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation provided with your purchase or contact HALLOMOTOR directly. Keep your proof of purchase for warranty claims.

Хэрэглэгчийн дэмжлэг

If you encounter any issues not covered in this manual or require further assistance, please contact the seller or HALLOMOTOR customer support. Provide your product model number and a detailed description of the issue for efficient service.

	Bafang E-bike Drive Systems and Components Workbook 2023 Comprehensive workbook detailing Bafang's range of e-bike drive systems, motors, batteries, HMIs, controllers, sensors, and accessories for various applications including eMTB, eRoad, eTour, eCity, eCargo, and eFAT. Features technical specifications, compatibility information, and service tools.
	Panasonic EYFCA1WC: Хянагчийн холболт ба тохиргооны гарын авлага Энэхүү баримт бичиг нь параметр болон багц хуваарилалтад анхаарлаа хандуулж, нээлттэй протоколоор дамжуулан Panasonic хянагчийг гадаад захын төхөөрөмжид холбох талаар дэлгэрэнгүй зааврыг өгдөг. Мөн гадаад хандалтын цэгүүдийн тохиргоо, EYFCA1WC загварын техникийн үзүүлэлтүүд болон алдааг олж засварлах кодуудыг багтаасан болно.
	Лидер Фокс цахилгаан унадаг дугуйны ашиглалтын заавар, гарын авлага Лукас загвар болон Bafang M420 цахилгаан иж бүрдэлд анхаарлаа хандуулсан Leader Fox цахилгаан унадаг дугуйн ашиглалтын иж бүрэн заавар, техникийн үзүүлэлтүүд болон алдааг олж засварлах гарын авлага.
	Бафанг дэлгэцийн хэрэглэгчийн гарын авлага ба гарын авлага This guide provides detailed information on operating and understanding the Bafang display control panel for electric bicycles, covering features like lighting control, support modes, walk assist, trip data, and display symbols.
	TSDZ2 төв моторын хөтөч системийг суурилуулах гарын авлага Мотор, дэлгэц, хурд мэдрэгч суурилуулах, системийн холболт, эд ангиудын жагсаалт зэрэг алхмуудыг нарийвчлан харуулсан YOSE POWER TSDZ2 хөдөлгүүрийн төв хөтчийн системийг суурилуулах иж бүрэн гарын авлага.
	Лидер Фокс цахилгаан унадаг дугуйн ашиглалтын заавар Comprehensive operating instructions for Leader Fox electric bicycles, covering setup, usage, maintenance, and troubleshooting. Includes details on the e-bike system, battery care, LCD display functions, and controller settings.

HALLOMOTOR 600C TFT display with CAN protocol