1. Танилцуулга
The ROBERTS 9" PrecisionCuts Pro Multi-Floor Cutter is a specialized tool designed for efficient and precise cutting of various flooring and siding materials. This manual provides essential information for the safe and effective operation, setup, and maintenance of your cutter.
This tool is capable of cutting the following materials:
- Инженер модон шал
- Ламинат шал
- Паркет
- Винил шал
- VCT хавтан
- Винил салаа
- Цементийн салаа
- Резин
- Хөөс
- PVC
Image 1.1: The ROBERTS 9" PrecisionCuts Pro Multi-Floor Cutter. This image displays the complete cutter assembly, featuring the long handle, cutting mechanism, and base with a ruler.
2. Аюулгүй ажиллагааны заавар
Always prioritize safety when operating any cutting tool. Failure to follow these instructions may result in injury or damage to the tool.
- Гарын авлагыг уншина уу: Before operation, thoroughly read and understand all instructions in this manual.
- Хамгаалалтын хэрэгсэл өмсөх: Аюулгүйн шил, бээлий, бат бөх гутал зэрэг хувийн хамгаалах хэрэгслийг үргэлж өмсөж байгаарай.
- Тогтвортой ажлын гадаргуу: Ensure the cutter is placed on a stable, level, and non-slip surface before use.
- Ажлын талбайг цэвэр байлгах: Maintain a clean and well-lit work area. Cluttered areas invite accidents.
- Гараа цэвэр байлгах: Never place hands or fingers near the blade during operation or when adjusting materials.
- Аюулгүй материал: Ensure the material to be cut is properly positioned and stable on the cutter's base.
- Хутганы хурц байдал: A dull blade can be more dangerous than a sharp one as it requires more force, increasing the risk of slippage. Keep the blade sharp and replace it when necessary.
- Хүүхдүүд ба ажиглагчид: Хүүхэд болон хажуугийн хүмүүсийг ажлын талбайгаас хол байлга.
- Зөв хадгалалт: Store the cutter in a dry, secure location out of reach of children when not in use.
3. Бүтээгдэхүүний бүрэлдэхүүн хэсгүүд
Familiarize yourself with the key parts of your ROBERTS PrecisionCuts Pro Multi-Floor Cutter:
- Өргөтгөсөн бариул: Provides leverage for smooth and powerful cutting action.
- Бөмбөлөг холхивчтой гангаар бүрсэн камерууд: Ensures smooth and efficient operation of the cutting mechanism.
- 4 мм зузаантай вольфрамын ир: Durable, resharpenable, and replaceable for long-lasting performance.
- Түгжих шурагтай дахин байрлуулж болох чиглүүлэгч бар: Allows for precise 90-degree straight cuts.
- Суурилуулсан захирагч: Нарийвчлалтай хэмжилт хийхэд инч болон миллиметр гэсэн хоёр үзүүлэлттэй.
- Баригдсан гэрэл: Илүү нарийвчлалтай болгохын тулд зүсэх шугамыг гэрэлтүүлдэг (9 вольтын батерей шаардлагатай, тусад нь зардаг).
- Larger Opening: Integrated hand grip in the table for easier portability.
Image 3.1: Key components of the cutter. This diagram highlights the extended handle, steel-encased cams with ball bearings, 4mm thick tungsten blade, repositionable guide bar with locking screw, and the larger opening for carrying.
4. Тохиргоо
Before beginning any cutting tasks, ensure your cutter is properly set up.
- Савлах: Таслагчийг савлагаанаас нь болгоомжтой салга. Тээвэрлэлтийн явцад ямар нэгэн эвдрэл гарсан эсэхийг шалгана уу.
- Байршил: Place the cutter on a sturdy, level, and clean work surface. Ensure the surface can support the weight of the cutter and the material being cut.
- Хөтөчийн мөрний тохируулга: The guide bar can be moved to accommodate different material widths and ensure straight 90-degree cuts. Loosen the locking screw, slide the guide bar to the desired position, and securely tighten the locking screw. The built-in ruler aids in precise positioning.
Image 4.1: Guide bar and built-in ruler. This close-up shows the guide bar locked in place for perfect cuts and the integrated ruler with both inches and millimeters for accurate measurements.
- Install 9-Volt Battery (for Built-in Light): If you intend to use the built-in light for precise cutting, insert a 9-volt battery (sold separately) into the designated compartment. Refer to the battery compartment cover for correct polarity.
5. Ашиглалтын заавар
Follow these steps for safe and effective operation of your multi-floor cutter.
- Материал бэлтгэх: Зүссэн шугамаа материал дээр хэмжиж тэмдэглэнэ үү. Материал цэвэрхэн, хог хаягдалгүй байгаа эсэхийг шалгаарай.
- Байршлын материал: Place the material firmly against the guide bar and align your marked cutting line with the cutter's blade. Ensure the material is flat on the cutting surface.
- Activate Built-in Light (Optional): If using, turn on the built-in light to illuminate the cutting line for enhanced visibility and precision.
Image 5.1: Built-in light for precise cutting. This image shows a hand pressing the red button to activate the light, which illuminates the cutting area for improved accuracy.
- Зүсэлтийг гүйцэтгэх: With a firm grip on the extended handle, apply steady, downward pressure. Pull the handle down smoothly and consistently through the material. Avoid jerky movements.
- Clear Cut Material: Once the cut is complete, carefully remove the cut pieces from the work area.
- Давтах: Reposition the guide bar and material as needed for subsequent cuts.
Image 5.2: User operating the cutter. This image shows a person kneeling and using the extended handle to cut a piece of flooring material, demonstrating proper technique.
6. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны таслагчийн урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
- Хутга арчилгаа: The 4 mm thick tungsten blade is resharpenable. If cuts become difficult or ragged, the blade may need sharpening or replacement. Consult a professional for blade sharpening or purchase a genuine ROBERTS replacement blade.
- Цэвэрлэгээ: After each use, clean the cutter to remove dust, debris, and material residue. Use a dry cloth or brush. Avoid using harsh chemicals that could damage the tool's finish or components.
- Тосолгоо: Periodically apply a light machine oil to the moving parts, such as the cam mechanism and guide bar slides, to ensure smooth operation.
- Хадгалах: Store the cutter in a dry, protected environment to prevent rust and damage.
7. Алдаа засах
If you encounter issues with your cutter, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Cuts are not clean or straight. | Dull blade, improper material positioning, loose guide bar. | Sharpen or replace blade. Ensure material is firmly against guide bar. Tighten guide bar locking screw. |
| Difficulty in cutting material. | Dull blade, material too thick, insufficient downward pressure. | Sharpen or replace blade. Verify material thickness is within specifications (max 5/8" or 16mm). Apply firm, steady pressure. |
| Суурилуулсан гэрэл ажиллахгүй байна. | Dead or missing 9-volt battery. | Replace the 9-volt battery. Check battery polarity. |
| Cutter mechanism feels stiff. | Lack of lubrication, accumulated debris. | Clean moving parts and apply light machine oil. |
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | 10-911 |
| Брэнд | РОБЕРТ |
| Материал | Metal, Tungsten (Blade) |
| Хамгийн их зүсэх өргөн | 9 инч (229 мм) |
| Хамгийн их зүсэлт хийх зузаан | 5/8 инч (16 мм) |
| Diagonal Cut Capacity | 5.5 инч |
| Хутганы зузаан | 4 мм |
| Зүйлийн жин | 26 фунт |
| Гэрлийн эрчим хүчний эх үүсвэр | 9-volt battery (sold separately) |
| UPC | 075378100911 |
Image 8.1: Cutter dimensions. This image illustrates the approximate height (36.5" / 92.7 cm), width (9.25" / 23.5 cm), and length (25.5" / 64.7 cm) of the ROBERTS PrecisionCuts Pro Multi-Floor Cutter, along with its cutting capacities of up to 9" wide and 5/8" thick.
9. Хэрэглэгчийн дэмжлэг
For further assistance, technical support, or to inquire about replacement parts, please contact ROBERTS customer service. Refer to the product packaging or the official ROBERTS webхамгийн сүүлийн үеийн холбоо барих мэдээллийг авах сайт.
