1. Танилцуулга
The Pedrollo TOP 2 submersible pump is designed for pumping clear water without abrasive particles. This 0.5 HP, 115 Volt pump is engineered for ease of use and reliable operation, featuring total motor cooling and a double mechanical seal on the shaft for enhanced safety and durability.
It is particularly suitable for emergency draining of small flooded areas such as basements, garages, and fountains, as well as for emptying containers or water tanks, and draining water from dishwashers and washing machines.
2. Аюулгүй байдлын мэдээлэл
Always prioritize safety when operating electrical equipment, especially with water. Read and understand all instructions before installation and use.
- Цахилгааны холболт: Ensure the power supply matches the pump's specifications (115 Volts). Connect the pump to a properly grounded outlet with a residual current device (RCD) for protection against electric shock.
- Усны чанар: This pump is designed for clear water. Do not use it for pumping flammable liquids, corrosive chemicals, or water containing large abrasive particles.
- Температурын хязгаар: The maximum liquid temperature for continuous operation is +40 °C. For intermittent use, the pump can handle temperatures up to +40 °C for a maximum period of 3 minutes.
- Харьцуулах: Always use the integrated handle for lifting and lowering the pump. Never pull the pump by its power cable or discharge hose.
- Хүүхэд ба тэжээвэр амьтад: Keep children and pets away from the pump and the area of operation.
- Засвар үйлчилгээ: Засвар үйлчилгээ эсвэл цэвэрлэгээ хийхээс өмнө насосыг цахилгаан тэжээлээс салга.
3. Тохиргоо ба суурилуулалт
Насосны гүйцэтгэл, урт хугацааны ашиглалтын хувьд зөв суурилуулалт чухал юм.
3.1 Савлах, шалгах
Carefully remove the pump from its packaging. Inspect the pump for any signs of damage during transit. Ensure all components, including the 5-meter power cable and integrated float switch, are present.
Pedrollo TOP 2 Submersible Pump packaging and unit.
3.2 Connecting the Discharge Hose
Attach a suitable discharge hose to the pump's outlet. Ensure the connection is secure to prevent leaks during operation. The pump is designed to accommodate standard hose sizes.
3.3 Positioning the Pump
Place the pump on a stable, flat surface in the area to be drained. Ensure the pump is fully submerged in the water before starting. The maximum immersion depth for the TOP 2 model is 3 meters.
Pedrollo TOP 2 Submersible Pump showing the integrated handle and float switch.
3.4 Хөвөгч шилжүүлэгчийн тохируулга
The pump features an integrated float switch for automatic start and stop. The float switch activates the pump when the water level rises and deactivates it when the water level drops to a certain point. Ensure the float switch can move freely without obstruction to function correctly.
4. Үйл ажиллагаа
Once installed, operating the Pedrollo TOP 2 pump is straightforward.
4.1 Насосыг эхлүүлэх
After ensuring the pump is correctly positioned and submerged, plug the power cable into a suitable electrical outlet. The integrated float switch will automatically start the pump when the water level reaches the activation point.
4.2 Автомат ажиллагаа
The float switch will automatically turn the pump on and off based on the water level. This feature is ideal for continuous monitoring and draining of fluctuating water levels. The pump will continue to operate until the water level drops to the minimum emptying level of 14 mm from the bottom.
4.3 Насосыг зогсоох
To manually stop the pump, simply unplug it from the power outlet. The pump will also stop automatically once the water level falls below the float switch's deactivation point.
5. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь оновчтой ажиллагааг хангаж, насосны ашиглалтын хугацааг уртасгадаг.
- Цэвэрлэгээ: Periodically clean the pump's exterior to remove any debris or sediment. Ensure the intake area is clear of obstructions.
- Хөвөгч унтраалгын шалгалт: Regularly check that the float switch moves freely and is not obstructed by debris.
- Импеллерийн үзлэг: If the pump's performance decreases, inspect the impeller for blockages. The pump can handle solid particles up to Ø 10 mm. Larger particles may cause damage or blockages.
- Хадгалах: If storing the pump for an extended period, especially in freezing conditions, ensure it is completely drained of water to prevent damage. Store in a dry, protected area.
6. Алдаа засах
This section addresses common issues you might encounter with your Pedrollo TOP 2 pump.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Насос асахгүй байна | Цахилгаан хангамж байхгүй Float switch not activated Моторын хэт ачаалал | Цахилгааны холболт ба таслуурыг шалгана уу Ensure water level is high enough to activate float Моторыг хөргөхийг хүлээнэ үү; бөглөрөл байгаа эсэхийг шалгана уу |
| Усны урсгал бага эсвэл огт байхгүй | Discharge hose kinked or blocked Pump intake blocked Impeller damaged or clogged | Check and clear hose Clean pump intake screen Disconnect power and inspect/clean impeller |
| Насос тасралтгүй ажилладаг | Хөвөгч унтраалга 'асаалттай' байрлалд гацсан Тасралтгүй усны урсгал | Check float switch for obstructions Verify the source of water inflow |
Хэрэв эдгээр шийдлүүдийг туршиж үзсэний дараа асуудал арилахгүй бол мэргэшсэн үйлчилгээний ажилтантай холбоо барина уу.
7. Техникийн үзүүлэлтүүд
Technical details for the Pedrollo TOP 2 Submersible Pump.
Ойролцоогоор view of the Pedrollo TOP 2 Submersible Pump, highlighting the technical label.
- Загвар: ШИЛДЭГ 2
- Эрчим хүч: 0.5 HP
- Ботьtage: 115 вольт
- Усанд орох хамгийн их гүн: 3 метр
- Хамгийн их шингэний температур: +40 °C (for max 3 minutes)
- Sphere Passage (Max Particle Size): Ø 10 мм
- Maximum Emptying Level: 14 mm from the bottom
- Материал: Цутгамал төмөр
- Эрчим хүчний эх үүсвэр: Electric cable (5m length supplied)
- Оруулсан бүрэлдэхүүн хэсгүүд: Integrated float for automatic start/stop
- Хэмжээ (багц): 31.6 x 20.9 x 19.5 см
- Жин (багц): 5.32 кг
- Хамгийн их өргөх өндөр: 3 метр
8. Бүтээгдэхүүний албан ёсны видеонууд
No official product videos specifically for the Pedrollo TOP 2 submersible pump from a 'Seller' creator type were found in the provided data. The available video is for a different product (Truper submersible pump) and is therefore not included.
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Pedrollo customer service directly. Keep your purchase receipt as proof of purchase.