1. Танилцуулга
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your SYNCO XTalk XPro2 2.4GHz Wireless Intercom Headset System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Figure 1: SYNCO XTalk XPro2 Headset System and Accessories
2. Бүтээгдэхүүн дууссанview
The SYNCO XTalk XPro2 is a full-duplex wireless intercom headset system designed for professional team communication. Key features include:
- Enhanced Signal Reception: External antennas provide a reliable 500m (1640ft) connection range.
- Дэвшилтэт дуу чимээг бууруулах: Features 2.0 AEC algorithm (150Hz to 7KHz) for clear voice recognition in noisy environments.
- Flexible Team Communication: Supports up to 13-unit connections with group expansion technology.
- Өсгөх горим: Enhances signal strength for stable communication through obstacles.
- Dominant Mode: One-button remote muting function for the Master headset.
- Батерейны урт наслалт: Over 24 hours of use with rechargeable and replaceable batteries.
- Бодит цагийн хяналт: 3.5mm monitoring jack for simultaneous communication and device audio monitoring.
Figure 2: Enhanced Signal Reception
Figure 3: Advanced AEC Noise Reduction
3. Тохиргоо
3.1 Manual Pairing
Follow these steps to manually pair your headsets:
- Бүх чихэвчийг асаана уу.
- Set one headset as the Master and the others as Level 1.
- Within 1 minute, long press all 'A' buttons. Release after the first beep. You will hear "Pairing Succeed".
- Restart all headsets.
Video 1: Headset Pairing Instructions. This video demonstrates the steps for manually pairing the SYNCO XTalk XPro2 headsets, including powering on, setting master/level units, and initiating the pairing sequence.
3.2 Using SYNCO EasyGo Software
For quick firmware upgrades, voice pack installations, and headset pairing, use the SYNCO EasyGo software. Refer to the user guide for software download and usage instructions from the SYNCO official site.
Figure 4: SYNCO EasyGo Software Interface
4. Ашиглалтын заавар
4.1 Дууны түвшний тохиргоо
Short press the volume '+' or '-' buttons on the headset to adjust the listening volume.
Video 2: Volume Adjustment. This video demonstrates how to adjust the volume on the SYNCO XTalk XPro2 headset.
4.2 Микрофоныг дуугүй болгох/дууг нь нээх
To mute or unmute the microphone, rotate the boom arm up or down. Rotating it up mutes the microphone, and rotating it down unmutes it.
Video 3: Microphone Mute/Unmute. This video illustrates how to mute and unmute the microphone by rotating the boom arm on the headset.
4.3 Дуу чимээг арилгах
Short press button 'B' to toggle noise cancellation on or off. You will hear a beep to confirm the change.
Video 4: Noise Cancellation Activation. This video shows how to activate or deactivate the noise cancellation feature on the headset.
4.4 Dominant Mode
Press and hold button 'B' to enter Dominant Mode. This mode allows the Master headset to mute all remote headsets instantly. Release the button to exit Dominant Mode.
Video 5: Dominant Mode Operation. This video demonstrates how to use the Dominant Mode feature for master control over remote headsets.
4.5 Өргөтгөх горим
Long press the volume '-' button to hear a "beep", then release to switch between Mode 1, Mode 2, and Mode 3. Mode 2 is the default. Boost Mode enhances signal strength for stable communication, especially through obstacles.
Video 6: Boost Mode Activation. This video explains how to activate and cycle through Boost Modes for enhanced signal strength.
4.6 Бодит цагийн хяналт
Connect the headset to a device (e.g., camera, recorder) via the 3.5mm TRS port for real-time audio monitoring. This port is for monitoring only and does not output audio.
Figure 5: Real-Time Monitoring Setup
Video 7: Real-Time Monitoring Connection. This video demonstrates connecting the headset for real-time audio monitoring.
5. Үзүүлэлтүүд
The LED indicator on the microphone boom arm provides status information:
- Ногоон гэрэл тогтвортой: Амжилттай хосолсон
- Green Light Flashing Slow: Холбогдоогүй
- Green/Yellow Lights Alternating: Дуу чимээ арилгах унтраалттай
- Red Light Flashing Slow: Батерей бага
- Улаан гэрэл тогтвортой: Цэнэглэж байна
Video 8: Indicator Meanings. This video explains the different LED indicator states and their corresponding meanings.
6. Засвар үйлчилгээ
To ensure the longevity and optimal performance of your SYNCO XTalk XPro2 headset system, follow these maintenance guidelines:
- Цэвэрлэгээ: Чихэвчийг цэвэрлэхдээ зөөлөн, хуурай даавуу ашиглаарай. Хүчтэй химийн бодис эсвэл зүлгүүрийн материал хэрэглэхээс зайлсхий.
- Хадгалах: Чихэвчийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
- Батерейны арчилгаа: The system uses rechargeable and replaceable Lithium-Ion batteries. Ensure batteries are fully charged before extended use and stored properly if not used for long periods.
- Микрофоны хамгаалалт: Keep the microphone foam cover clean and replace if damaged to maintain audio quality.
Figure 6: 24-Hour Battery Life
7. Алдаа засах
If you encounter issues with your SYNCO XTalk XPro2 system, refer to the following common problems and solutions:
- No Audio/Intermittent Connection:
- Ensure all headsets are powered on and fully charged.
- Verify proper pairing between Master and Level 1 headsets (refer to Section 3.1).
- Check the operating range; move closer to the Master headset.
- Restart all headsets.
- Дууны чанар муу/Хэт их чимээ шуугиан:
- Ensure Noise Cancellation is activated (refer to Section 4.3).
- Check microphone position and ensure it is not obstructed.
- Verify that the microphone boom arm is fully down for unmuted operation.
- Чихэвч цэнэглэхгүй байна:
- Цэнэглэх кабель нь чихэвч болон тэжээлийн эх үүсвэрт найдвартай холбогдсон эсэхийг шалгаарай.
- Эрчим хүчний эх үүсвэрийн ажиллагааг шалгана уу.
- Verify the charging indicator (Red Light Steady) as per Section 5.
8. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Загварын нэр | SYNCO XTalk XPro2 |
| Холболтын технологи | Утасгүй (2.4GHz) |
| Чихэвчний үүр | 3.5 мм Жак |
| Дуу чимээний хяналт | Идэвхтэй дуу чимээг арилгах |
| Зайны ашиглалт | 24 цаг |
| Хяналтын арга | Хүрэх |
| Чихэвчний хэлбэр | Чихний дээгүүр аяга |
| Зүйлийн жин | 1.8 фунт |
| Үйлдвэрлэгч | СИНКО |
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or service inquiries, please refer to the official SYNCO webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.
