1. Танилцуулга
This manual provides comprehensive instructions for the safe and efficient operation of your HTVRONT Auto Heat Press 2. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
2. Аюулгүй байдлын мэдээлэл
АНХААРУУЛГА: Эдгээр аюулгүй ажиллагааны зааврыг дагаж мөрдөөгүй тохиолдолд гал түймэр, цахилгаанд цохиулах эсвэл бусад гэмтэл бэртэл, эвдрэлд хүргэж болзошгүй.
- Дулааны прессийг үргэлж тогтвортой, халуунд тэсвэртэй гадаргуу дээр ажиллуул.
- Keep hands and fingers clear of the heating plate during operation to avoid burns.
- Машиныг ус болон бусад шингэнд дүрж болохгүй.
- Цахилгааны утас гэмтээгүй, газардуулгатай залгуурт зөв залгагдсан эсэхийг шалгаарай.
- Ашиглаагүй үед эсвэл цэвэрлэхийн өмнө машиныг салга.
- Ашиглалтын явцад машиныг хараа хяналтгүй орхиж болохгүй.
- The machine features an automatic shut-off function after 15 minutes of inactivity to prevent overheating.
- Хүүхдийн гар хүрэхгүй газар хадгална.
3. Бүтээгдэхүүн дууссанview
The HTVRONT Auto Heat Press 2 is designed for efficient and precise heat transfer applications. Familiarize yourself with its main components:
- Дулааны хавтан: The upper heating element that applies heat and pressure.
- Индүүний тавцан (Доод тавцан): The surface where materials are placed for pressing. Features a fully pull-out drawer design.
- Үндсэн: Машины тогтвортой байдлыг хангадаг.
- LED дэлгэц: Displays temperature, time, and pressure settings.
- Хяналтын товчлуурууд: Used to adjust settings and initiate operations.
4. Тохиргоо
Follow these steps to set up your HTVRONT Auto Heat Press 2 for first use:
- Машиныг задлах: Carefully remove the heat press from its packaging. Retain all packaging materials for potential future transport or storage.
- Байршил: Place the machine on a flat, stable, and heat-resistant surface. Ensure there is adequate clearance around the machine for ventilation and safe operation.
- Эрчим хүчний холболт: Connect the power cord to the machine and then plug it into a standard 110V (DC) grounded electrical outlet.
- Анхны асаалт: Press the power button to turn on the machine. The LED screen will illuminate.
5. Ашиглалтын заавар
5.1. Асаах/унтраах
- Асаахын тулд асаах товчийг дарна уу.
- To power off, press and hold the power button until the screen turns off.
5.2. Setting Parameters (Temperature, Time, Pressure)
The HTVRONT Auto Heat Press 2 allows for precise control over temperature, time, and pressure to suit various materials and transfer types.
- Температурын хүрээ: 210°F - 410°F (100°C - 210°C)
- Цагийн хүрээ: 1 - 999 секунд
- Даралтын хүрээ: 50 - 170 LB (adjustable)
Use the control buttons on the LED screen to adjust these settings. The machine heats up quickly, reaching 410°F within 5 minutes and 30 seconds.
5.3. Automatic Pressing Cycle
Once parameters are set and the material is in place, the automatic pressing function simplifies operation:
- Place your substrate and transfer material on the ironing board.
- Press the "R" button to initiate the automatic pressing cycle. The heat plate will descend and apply pressure.
- The machine will buzz when the set time is complete and automatically release the heat plate.
5.4. Using the Fully Pull-out Drawer
The ironing board features a fully pull-out drawer, allowing for safe and easy placement of materials without contact with the hot heat plate.
- Pull the drawer completely out before placing or adjusting your items.
- Push the drawer back in before starting the pressing cycle.
5.5. Adjusting Screen Angle
The LED screen can be adjusted to 7 levels within a 0-75° range for improved visibility and ergonomic comfort during operation.
5.6. Material Compatibility and Higher Heating Height
The HTVRONT Auto Heat Press 2 is compatible with various heat transfer materials and features an increased heating height for thicker items.
- Тохиромжтой материал: HTV (Heat Transfer Vinyl), Sublimation Paper, DTF (Direct to Film), Heat Transfer Paper, Puff Heat Transfer Vinyl, Glitter Heat Transfer Vinyl.
- Increased Heating Height: Up to 4.5 cm (1.77 inches), allowing for pressing on thicker items such as hoodies, canvas bags, and pillows, in addition to t-shirts.
6. Засвар үйлчилгээ
Proper maintenance ensures the longevity and optimal performance of your heat press.
- Дулааны хавтанг цэвэрлэх: Машиныг бүрэн хөргөнө. Зөөлөн, d ашиглана ууamp cloth to wipe the heat plate. For stubborn residue, a specialized heat press cleaner can be used, following the cleaner's instructions. Avoid abrasive materials.
- Cleaning the Ironing Board: Wipe the ironing board with a damp даавуу. Дараагийн хэрэглээний өмнө хуурай эсэхийг шалгаарай.
- Ерөнхий цэвэрлэгээ: Машины гадна талыг зөөлөн, хуурай даавуугаар арчина.
- Хадгалах: Дулааны шахуургыг ашиглаагүй үедээ хуурай, тоосгүй орчинд хадгална уу.
7. Алдаа засах
If you encounter issues with your HTVRONT Auto Heat Press 2, refer to the following common troubleshooting steps:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Машин асахгүй байна. | Цахилгааны утас зөв холбогдоогүй; цахилгаан гаралтын асуудал. | Ensure the power cord is securely plugged into both the machine and a working grounded outlet. Test the outlet with another device. |
| Машин халахгүй байна. | Temperature not set; machine in standby mode. | Verify temperature settings on the LED screen. Allow sufficient time for preheating. If the machine has been idle for 15 minutes, it may have entered auto shut-off mode; power cycle the machine. |
| Uneven heat transfer results. | Incorrect pressure; uneven material placement; faulty transfer material. | Adjust pressure settings as needed (50-170 LB). Ensure material is laid flat and evenly. Test with new transfer material. |
| Automatic press not engaging/releasing. | "R" button not pressed; obstruction. | Ensure the "R" button is pressed firmly. Check for any obstructions preventing the heat plate from moving freely. |
If the problem persists after attempting these solutions, please refer to the support section for further assistance.
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | SG-RYJ-0521-АНУ |
| Дулааны хавтангийн хэмжээ | 15 x 15 инч (38.1 x 38.1 см) |
| Температурын хүрээ | 210°F - 410°F (100°C - 210°C) |
| Цагийн хүрээ | 1 - 999 секунд |
| Даралтын хүрээ | 50 - 170 LB |
| Increased Heating Height | 4.5 см (1.77 инч) хүртэл |
| Хүч | 1500 Вт |
| Оролтын хэмжээtage | 110 вольт (ДС) |
| Зүйлийн жин | 47.4 фунт (21.54 кг) |
| Бүтээгдэхүүний хэмжээс | Ойролцоогоор 20.9"Урт x 17.1"Өргөн x 13"Өндөр |
| Автомат унтрах | 15 минут идэвхгүй болсны дараа |
| Дэлгэцийн өнцгийн тохируулга | 0-75 градус |
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, please refer to the documentation included with your purchase or visit the official HTVRONT website. For technical support, product inquiries, or assistance with troubleshooting beyond this manual, please contact HTVRONT customer service through their official channels. Details can typically be found on the manufacturer's webсайт эсвэл таны худалдан авах платформ.
Note: The manufacturer is committed to providing support; however, specific contact methods may vary. Always check the latest information on the official HTVRONT webсайт.
