CYCLAMI дугуйны өргөгч 1.2л хөнгөн цагаан хайлшин хийлэгч хэрэглэгчийн гарын авлага

1. Бүтээгдэхүүн дууссанview болон бүрэлдэхүүн хэсгүүд

The CYCLAMI Tire Booster is a portable air storage tank designed to provide a rapid burst of air for seating tubeless bicycle tires. It features a 1.2L capacity and can be charged up to 200 PSI, making it suitable for various bicycle types including MTB, road, cyclocross, and fat bikes.

Зураг 1.1: The CYCLAMI Tire Booster and its retail packaging. This image displays the sleek black aluminum alloy cylinder and the included hose and valve head.

Зураг 1.2: Нэг гаруйview of the Tire Booster highlighting its key specifications: Max Pressure 200 PSI, Storage 1.2L, AV/FV Convertibility, Aluminum Alloy Material, 420mm Hose, and Weight 465g.

2. Тохиргоо ба бэлтгэл

2.1 Valve Head Conversion (Presta/Schrader)

The Tire Booster features a universal valve head compatible with both Presta (FV) and Schrader (AV) valves. To switch between valve types, simply reverse the internal components of the nozzle head.

1. Unscrew the outer cap of the nozzle head.
2. Remove the internal rubber gasket and the plastic insert.
3. For Presta (FV) valves, ensure the circular hole of the plastic insert faces outwards.
4. For Schrader (AV) valves, ensure the sharp hole of the plastic insert faces outwards.
5. Reinsert the rubber gasket and plastic insert in the correct orientation, then screw the outer cap back on securely.

Зураг 2.1: Detailed diagram illustrating the conversion process for the AV (Schrader) and FV (Presta) valve head. Note the different orientations of the internal components for each valve type.

2.2 Preparing the Tire for Inflation

Before inflating, ensure the tubeless tire is properly seated against the rim. A tight seal is crucial to prevent air leakage during the initial inflation burst. If there are visible gaps between the tire bead and the rim, the booster may not effectively seat the tire.

Зураг 2.2: Visual guide emphasizing the importance of a tight seal between the vacuum tire and the wheel frame. A large gap will prevent successful inflation.

3. Ашиглалтын заавар

3.1 Charging the Tire Booster

The Tire Booster must be charged with air using an external pump before use. It can be inflated with a manual floor pump or an electric air compressor.

1. Connect your external pump to the Schrader valve on the top of the Tire Booster.
2. Inflate the air storage tank to 150-200 PSI. Do not exceed 200 PSI.
3. Once charged, disconnect the external pump.

Зураг 3.1: The CYCLAMI Tire Booster connected to a floor pump, demonstrating the process of filling the air tank. The blue valve on the booster should be in the 'storage' position during charging.

3.2 Inflating a Bicycle Tire

Follow these steps to inflate your bicycle tire using the charged Tire Booster:

1. Ensure the valve head on the booster's hose is configured for your tire's valve type (Presta or Schrader) as described in Section 2.1.
2. Connect the booster's nozzle head securely to the tire's valve stem.
3. Rotate the blue valve switch on the booster from the 'storage' position to the 'inflation' position. This will release the stored air rapidly into the tire.
4. Listen for the tire bead to audibly 'pop' into place, indicating a successful seal.
5. Once the tire is seated, disconnect the booster. The tire will have some initial pressure, but you will need to use a regular pump to achieve the desired riding pressure.

Зураг 3.2: Diagram illustrating the two positions of the valve switch: 'Switch to storage mode to inflate the gas tank' and 'Switch to inflation mode to inflate the tire'.

Зураг 3.3: A comprehensive visual guide detailing the four main steps of operating the Tire Booster: 1) Inflate the air storage tank, 2) Select AV or FV mode, 3) Lock the nozzle head to the tire, and 4) Rotate the valve switch to inflate.

4. Засвар үйлчилгээ

Proper maintenance ensures the longevity and reliable performance of your CYCLAMI Tire Booster.

• Цэвэрлэгээ: Wipe the exterior of the booster with a clean, damp cloth after use. Avoid using harsh chemicals or abrasive materials.
• Хадгалах: Store the Tire Booster in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store it with a small amount of pressure (e.g., 20-30 PSI) to maintain seal integrity, but not fully charged.
• Хоолой ба лацыг шалгах: Periodically check the hose and valve head for any signs of wear, cracks, or damage. Ensure all connections are tight. Replace components if damage is observed.
• Хавхлагын гол: Ensure the valve core on the booster's inflation port is clean and free of debris to allow for efficient charging.

5. Алдаа засах

If you encounter issues with your Tire Booster, refer to the following troubleshooting guide:

6. Техникийн үзүүлэлтүүд

7. Баталгаат хугацаа ба дэмжлэг

For warranty information, product support, or to inquire about replacement parts, please contact CYCLAMI customer service. Details regarding specific warranty periods and terms are typically provided with your purchase documentation or can be found on the official CYCLAMI webсайт.

Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгална уу.