NENEN DDS661

NENEN DDS661 Single Phase Digital Energy Meter User Manual

Model: DDS661 (AC110V 60Hz / AC220V 50Hz)

Танилцуулга

This manual provides essential information for the safe and efficient operation of your NENEN DDS661 Single Phase Digital Energy Meter. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed for measuring active energy consumption in single-phase AC circuits.

Аюулгүй байдлын мэдээлэл

  • Суурилуулалтыг зөвхөн мэргэшсэн ажилтан хийх ёстой.
  • Суулгах, засвар үйлчилгээ хийхээс өмнө цахилгааныг салгасан эсэхийг шалгаарай.
  • Do not operate the meter if it is damaged.
  • Observe all local electrical codes and regulations.
  • The meter is designed for indoor use in a dry environment.

Бүтээгдэхүүн дууссанview

The NENEN DDS661 is a single-phase digital energy meter designed for DIN rail mounting. It features an LCD backlight display for clear readings of energy consumption (KWh), and is available in AC110V 60Hz and AC220V 50Hz variants. Some models may include RS485 communication capabilities for remote data access.

Урд view of the NENEN DDS661 Single Phase Digital Energy Meter with LCD display showing KWh reading and a green indicator light.

Зураг 1: Урд view of the NENEN DDS661 Digital Energy Meter. This image shows the meter's compact design, the LCD screen displaying KWh, and the pulse indicator light. The model number DDS661 is visible at the top of the display area.

NENEN DDS661 meter displaying various electrical parameters like Positive Power Consumption, Reverse Power Consumption, Total Power, Power, Power Factor, Frequency, Voltage, ба Одоогийн.

Figure 2: Display modes of the DDS661 meter. This image illustrates the different electrical parameters that can be shown on the LCD, including KWh for positive and reverse consumption, total power, instantaneous power, power factor, frequency, voltage, and current. Some models may feature RS485 communication.

Тохиргоо ба суурилуулалт

The DDS661 energy meter is designed for easy installation on a standard 35mm DIN rail. Ensure the installation location is dry, well-ventilated, and free from excessive vibration or electromagnetic interference.

Суулгах алхамууд:

  1. Эрчим хүчийг салгах: Before beginning any installation, ensure that the main power supply to the circuit where the meter will be installed is completely disconnected and locked out.
  2. Суурилуулалт: Attach the meter securely to a 35mm DIN rail. The meter features a clip mechanism for quick mounting.
  3. Хажуу тал view of the NENEN DDS661 Digital Energy Meter showing the DIN rail mounting clip.

    Зураг 3: Хажуу тал view illustrating the DIN rail mounting mechanism. This image highlights the blue clip used to secure the meter onto a standard DIN rail.

  4. Утас: Connect the input and output wires according to the wiring diagram provided on the meter's casing or in the detailed wiring instructions (not provided in this general manual). Ensure correct phase and neutral connections. The meter supports up to 60A.
  5. Баталгаажуулалт: Бүх холболтын нягт, зөв ​​эсэхийг давхар шалгана уу.
  6. Эрчим хүчийг сэргээх: Restore power to the circuit. The meter's LCD display should illuminate, indicating proper function.
NENEN DDS661 Digital Energy Meter mounted on a metal DIN rail.

Figure 4: The DDS661 meter securely installed on a DIN rail. This image demonstrates how the meter appears once properly mounted, ready for electrical connections.

Ашиглалтын заавар

Дэлгэцийн заалтууд:

The DDS661 meter features an LCD backlight display that cycles through various parameters or can be manually advanced depending on the model. Common display parameters include:

  • кВт цаг: Total active energy consumption.
  • Ботьtage (V): Instantaneous line voltage.
  • Одоогийн (A): Instantaneous line current.
  • Хүч (W): Instantaneous active power.
  • Эрчим хүчний хүчин зүйл (PF): The ratio of real power to apparent power.
  • Давтамж (Гц): The frequency of the AC supply.

The green LED indicator flashes at a rate of 1000 imp/kWh, indicating active energy measurement. A faster flash rate signifies higher power consumption.

RS485 Communication (for DDS661-RS485 models):

For models equipped with RS485, the meter can be integrated into a monitoring system for remote data acquisition. Refer to the specific RS485 communication protocol documentation for details on data registers, baud rates, and addressing. This functionality allows for convenient management and monitoring of power status.

Засвар үйлчилгээ

The NENEN DDS661 energy meter is designed for long-term, maintenance-free operation under normal conditions. Regular checks are recommended:

  • Цэвэрлэгээ: Keep the meter clean and free from dust. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Холболтын шалгалт: Утасны холболтууд нягт, зэврэлтгүй байгаа эсэхийг үе үе шалгаж байгаарай.
  • Байгаль орчны нөхцөл: Ашиглалтын орчин нь тогтоосон температур, чийгшлийн хязгаарт байгаа эсэхийг шалгаарай.

Алдааг олж засварлах

АсуудалБоломжит шалтгаанШийдэл
Meter display is blank.No power supply; incorrect wiring; internal fault.Check power supply to the circuit. Verify wiring connections. If power is present and wiring is correct, the meter may be faulty and require replacement.
KWh reading not increasing.No load connected; incorrect wiring; internal fault.Ensure a load is connected and drawing power. Verify wiring, especially input/output terminals. If issues persist, the meter may be faulty.
Green LED not flashing.No power consumption; LED fault.Confirm that there is active power consumption. If power is being consumed and the LED does not flash, there might be an internal issue.
Буруу уншилтууд.Incorrect wiring; external interference; meter calibration issue.Re-check all wiring connections. Ensure the meter is not exposed to strong electromagnetic fields. If suspected calibration issues, contact support.

For problems not listed here or if solutions do not resolve the issue, please contact NENEN customer support.

Үзүүлэлтүүд

ПараметрҮнэ цэнэ
ЗагварDDS661 / DDS661-RS485
Үнэлгээтэй ботьtageAC110V (60Hz) or AC220V (50Hz/60Hz)
Нэрлэсэн гүйдэл5(60)А
ДэлгэцLCD Backlight Digital Display
Импульсийн давтамж1000 имп / кВт цаг
Суурилуулалт35мм DIN төмөр зам
МатериалИнженерийн хуванцар
Зүйлийн жинОйролцоогоор 1.32 фунт (0.6 кг)
Багцын хэмжээОйролцоогоор 1.18 x 0.79 x 0.39 инч (3 x 2 x 1 см)

Баталгаат болон дэмжлэг

NENEN products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official NENEN website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact NENEN customer service through the retailer where the product was purchased or via the contact information provided on the NENEN official webсайт.

Тайлбар: Баталгаат хугацаа нь бүс нутаг болон жижиглэн худалдаалагчаас хамаарч өөр өөр байж болно.

Холбогдох баримт бичиг - DDS661

Урьдчилсанview DDS661 RS485 Communication Meter Reading: MODBUS-RTU Protocol and Register Addresses
Technical guide for the DDS661 energy meter, detailing RS485 communication using the MODBUS-RTU protocol. Covers data formats, register addresses for reading parameters like voltage, current, power, and methods for modifying meter address and communication rate.
Урьдчилсанview DDS661 DIN Rail Single Phase Energy Meter User Manual
User manual for the DDS661 DIN rail single phase two wire energy meter, covering safety instructions, specifications, installation, operation, and troubleshooting.
Урьдчилсанview DIN Rail Single Phase Electronic Energy Meter User Manual
User manual for the DIN Rail Single Phase Electronic Energy Meter, covering characteristics, installation, usage, transport, storage, and connection diagrams. Includes model numbers DDS661, DDS662, DDS668, DDS667, DDS669.
Урьдчилсанview RS485 Communication Meter Reading Protocol and Register Addresses
Technical guide detailing the RS485 communication protocol and register addresses for energy meter reading, including MODBUS-RTU data formats, parameter reading/writing commands, and register mappings.