Танилцуулга
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
Аюулгүй байдлын мэдээлэл
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
Багцын агуулга
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Chair Base with Wheels
- Хийн өргөх цилиндр
- Суудлын угсралт
- Арын түшлэгийн угсралт
- Толгойн түшлэг
- Суга (баруун ба зүүн)
- Footrest (if applicable to your model)
- Угсрах тоног төхөөрөмж (эрэг, угаагч, Аллен эрэг чангалах түлхүүр)
- Зааварчилгааны гарын авлага
Угсрах заавар
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- Assemble the Chair Base: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- Сулгыг бэхлэх: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- Арын түшлэгийг бэхлэх: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: Угсарсан суудал болон түшлэгийг хийн өргөгч цилиндр дээр болгоомжтой байрлуулж, төвд нь байрлуулж, тогтвортой байлгана.
- Install the Headrest: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
Ашиглалтын заавар ба тохируулга
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. Суудлын өндрийн тохируулга
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. 6-Way Adjustable Lumbar Support
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- Босоо тохируулга: Move the lumbar support up or down to align with your lower back curve.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. 3D Adjustable Armrests
The armrests provide versatile support and can be adjusted in three dimensions:
- Өндөр тохируулга: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- Эргүүлэх: Rotate 40 degrees left and right.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- Толгойн түшлэгийн тохируулга: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- Тухлах функц: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
Зураг: Ойрын зураг view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
Засвар үйлчилгээ
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- Тор даавууг цэвэрлэх: The breathable mesh fabric can be cleaned with a damp даавуу, зөөлөн саван. Химийн хүчтэй бодисоос зайлсхий.
- Хүрээ цэвэрлэх: Wipe the alloy steel frame and plastic components with a soft, damp даавуу.
- Дугуйны засвар үйлчилгээ: Periodically check the wheels for hair or debris and clean as needed to ensure smooth movement.
- Бэхэлгээг чангалах: Every few months, check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
Зураг: Томруулсан view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Сандал өндрөө тохируулдаггүй | Хийн өргөгч цилиндрийн эвдрэл эсвэл хөшүүрэг ажиллахгүй байна. | Ensure the height adjustment lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement. Contact customer support. |
| Сандал ганхаж, тогтворгүй болж байна | Суларсан эрэг эсвэл тэгш бус шал. | Бүх угсралтын боолтыг шалгаж, чангална уу. Сандал хавтгай, тэгш гадаргуу дээр байгаа эсэхийг шалгаарай. |
| Armrests are loose | Суурилуулах эрэг сул байна. | Tighten the screws securing the armrests to the seat. |
| Нурууны түшлэг нь налуу биш эсвэл түгжигддэггүй | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
Үзүүлэлтүүд
- Брэнд: Хбада
- Загвар: E2
- Өнгө: Хар
- Бүтээгдэхүүний хэмжээ: 30.51"D x 22.24"W x 18.11"H
- Арын хэв маяг: Торон
- Насны хүрээ (Тодорхойлолт): Насанд хүрсэн
- Гарны хэв маяг: Padded, 3D Adjustable
- Бөглөх материал: Торон
- Материал: Alloy Steel (Frame), Mesh (Seat/Back)
- Хэвтэж буй байрлалын тоо: 3 (135 градус хүртэл)
- Налуу: Тиймээ
- Формат хүчин зүйл: Оффисын дарга
Баталгаат болон дэмжлэг
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- Эд анги солих: Parts are replaced, not repaired, for covered issues.
- 30 хоногийн буцаах бодлого: Enjoy a 30-day return period without specific reasons required.
- Ирэх үед гэмтсэн: Repair and replacement are guaranteed for items damaged during shipping.
- Харилцагчийн үйлчилгээ: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
Дэлгэрэнгүй мэдээллийг эндээс авна уу Hbada Store on Amazon.
