ShiftCam S-AB03-MN

ShiftCam SnapStand Max зааварчилгааны гарын авлага

Model: S-AB03-MN | Brand: ShiftCam

Танилцуулга

The ShiftCam SnapStand Max is a versatile and portable accessory designed to enhance your mobile photography and videography experience. It functions as both an extendable selfie stick and a stable tripod, featuring a magnetic mount for MagSafe-enabled devices, a secure clip mount for other smartphones, a 200-degree tilt head, and a detachable Bluetooth remote for convenient control. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your SnapStand Max.

Хайрцагт юу байна

Upon unboxing your ShiftCam SnapStand Max, please verify that all components are present:

Contents of ShiftCam SnapStand Max box including the main unit, Bluetooth remote, and SnapClamp.

Image: Components included with the ShiftCam SnapStand Max, showing the main unit, the detachable Bluetooth remote, and the SnapClamp.

Гол онцлогууд

Тохируулах гарын авлага

1. Unfolding the SnapStand Max

  1. Hold the main body of the SnapStand Max firmly.
  2. Gently pull the top section upwards to extend the pole. Continue extending until it reaches your desired length.
  3. To deploy the tripod legs, grasp the base and spread the legs outwards until they lock into a stable position. Ensure the legs are fully extended for maximum stability.
ShiftCam SnapStand Max in tripod mode with legs extended and pole partially extended.

Image: The SnapStand Max set up as a tripod, demonstrating the extended legs and pole.

2. Ухаалаг утсаа холбох

A smartphone magnetically attached to the ShiftCam SnapStand Max, ready for use.

Image: A smartphone securely attached to the SnapStand Max, illustrating the magnetic connection.

3. Bluetooth алсын удирдлагатай хослуулах

  1. Remove the Bluetooth remote from its slot in the SnapStand Max handle.
  2. Алсын удирдлага дээрх товчлуурыг дарж, индикаторын гэрэл анивчиж эхлэх хүртэл барина уу, энэ нь хослох горимд байгааг илтгэнэ.
  3. On your smartphone, navigate to Тохиргоо > Bluetooth.
  4. Look for "ShiftCam Remote" or a similar device name in the list of available devices and tap to connect.
  5. Once paired, the indicator light on the remote will stop flashing and remain solid (or turn off, depending on the model). The remote is now ready for use.
A hand holding the ShiftCam Bluetooth remote control, demonstrating its use for capturing photos.

Image: The detachable Bluetooth remote being held, ready for pairing and use.

Ашиглалтын заавар

Using as a Selfie Stick

Two people using the ShiftCam SnapStand Max as a selfie stick on a beach.

Image: The SnapStand Max being used as a selfie stick to capture a group photo.

Using as a Tripod

A couple using the ShiftCam SnapStand Max as a tripod on a beach to capture a steady shot.

Image: The SnapStand Max deployed as a stable tripod for hands-free photography or videography.

Adjusting the Tilt Head

Засвар үйлчилгээ

Алдааг олж засварлах

АсуудалБоломжит шалтгаанШийдэл
Bluetooth удирдлагатай хослуулахгүй байна.Remote battery low or dead; remote not in pairing mode; Bluetooth off on phone.Ensure remote battery is charged/replaced. Press and hold remote button to enter pairing mode. Enable Bluetooth on your phone and search for "ShiftCam Remote".
Phone not securely held by magnetic mount.Phone not MagSafe compatible; misaligned; heavy case interfering.Ensure your phone or case is MagSafe compatible. Realign the phone. For non-MagSafe phones or added security, use the included SnapClamp клип.
Tripod тогтворгүй мэт санагдаж байна.Legs not fully extended; uneven surface; excessive weight.Ensure all tripod legs are fully extended and locked. Place on a flat, stable surface. Do not exceed the recommended weight capacity (designed for smartphones).
Pole does not extend or retract smoothly.Dirt or debris in joints; mechanism stuck.Gently clean the pole sections with a soft cloth. Avoid forcing the mechanism. If persistent, contact customer support.

Үзүүлэлтүүд

ОнцлогДэлгэрэнгүй
Загварын нэрS-AB03-MN
БрэндShiftCam
МатериалМеталл
ӨнгөШөнө дунд
Тохиромжтой төхөөрөмжүүдSmartphones (MagSafe compatible or with SnapClamp)
Эвхэгдсэн хэмжээсүүдОйролцоогоор 11 инч (28 см)
Өргөтгөсөн өндөр70 инч (178 см) хүртэл
Зүйлийн жин1.21 фунт (0.55 кг)
Tilt Head Range200 градус
Алсын холболтBluetooth

Баталгаат болон дэмжлэг

ShiftCam бүтээгдэхүүнүүд нь бат бөх чанар, гүйцэтгэлд зориулагдсан. Баталгаат хугацаа, бүтээгдэхүүний бүртгэл эсвэл техникийн дэмжлэгийн талаарх мэдээллийг албан ёсны ShiftCam вэбсайтаас авна уу. webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу.

Та мөн зочилж болно Амазон дээрх ShiftCam дэлгүүр нэмэлт бүтээгдэхүүний мэдээлэл болон туслах эх сурвалжийг авах.

Холбогдох баримт бичиг - S-AB03-MN

Урьдчилсанview ShiftCam SnapGrip Pro хурдан эхлүүлэх гарын авлага
ShiftCam SnapGrip Pro-ийн тохиргоо, цэнэглэх, утасгүй хаалтын ажиллагааг багтаасан хурдан эхлүүлэх гарын авлага. MagSafe-ийн нийцтэй байдал болон USB-C PD цэнэглэх талаарх мэдээллийг багтаасан болно.
Урьдчилсанview ShiftCam SnapPocket Light хурдан эхлүүлэх гарын авлага
ShiftCam SnapPocket Light-ийн хурдан эхлүүлэх гарын авлага бөгөөд үүнийг янз бүрийн утасны загварт хэрхэн холбох, гэрэлтүүлгийн түвшинг тохируулах талаар дэлгэрэнгүй бичсэн болно.
Урьдчилсанview SnapGrip Pro S-AA03: Хурдан эхлүүлэх гарын авлага ба хэрэглэгчийн гарын авлага | Shiftcam
Shiftcam SnapGrip Pro (S-AA03)-аа ашиглаж эхлээрэй. Энэхүү гарын авлагад хайрцгийг задлах, цэнэглэх, Bluetooth-ээр холбогдох, утасгүй хаалт болон цэнэглэх функцуудыг ашиглах зэрэг болно.
Урьдчилсанview ShiftCam SnapPod хурдан эхлүүлэх гарын авлага
ShiftCam SnapPod-г тохируулах, ашиглахад зориулсан товч гарын авлага, янз бүрийн ухаалаг гар утасны суурилуулалт, өнцгийн тохируулга зэргийг нарийвчлан харуулсан.
Урьдчилсанview ShiftCam ProGrip Эхлэх гарын авлага
Цэнэглэх, Bluetooth холболт, дагалдах хэрэгслийг суурилуулах гэх мэт функцуудыг багтаасан ShiftCam ProGrip-ийг тохируулах, ашиглах дэлгэрэнгүй гарын авлага.
Урьдчилсанview ShiftCam SnapGrip Creator иж бүрдэл хурдан эхлүүлэх гарын авлага
ShiftCam SnapGrip Creator Kit-ийг тохируулах, ашиглах товч гарын авлага нь MagSafe-ийн нийцтэй байдал, SnapGrip утасгүй хаалт, SnapPod суурилуулалт, өнцгийн тохируулга, SnapLight гэрэлтүүлгийн хяналт зэргийг багтаасан болно.