Гарын авлага+

DELIPOP 24W LED Wall Light with Motion Sensor

DELIPOP LED Outdoor/Indoor Wall Light with Motion Sensor

Model: 24W LED Wall Light with Motion Sensor (2-Pack, Warm White 3000K)

1. Аюулгүй ажиллагааны заавар

Please read these instructions carefully before installation and use. Retain this manual for future reference.

  • Цахилгааны аюулгүй байдал: Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Always turn off the main power supply before installation, maintenance, or repair.
  • Ботьtage: This product operates on AC 85V-265V. Ensure your power supply matches this requirement.
  • Усны эсэргүүцэл: The light fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use, avoid submerging it in water.
  • Суурилуулалтын өндөр: For optimal motion detection, install the light at a height of approximately 1.8 to 2.5 meters (5.9 to 8.2 feet).
  • Ашиглалтын температур: Ensure the operating environment is within the specified temperature range to prevent damage.

2. Багцын агуулга

Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу.

  • DELIPOP LED Wall Light (2 units)
  • Суурилуулах тоног төхөөрөмж (эрэг, ханын зангуу)
  • Зааварчилгааны гарын авлага

3. Бүтээгдэхүүний онцлог

  • Нэгдсэн хөдөлгөөн мэдрэгч: Detects movement within 3 to 8 meters (10 to 26 feet) at a 120° angle.
  • Автомат ажиллагаа: Light turns on automatically at night when motion is detected and turns off approximately 15 seconds after no motion is detected.
  • Эрчим хүчний хэмнэлттэй LED: 24W power consumption with a long lifespan of over 50,000 hours.
  • Халуун цагаан гэрэлтүүлэг: 3000K color temperature for a comfortable and inviting ambiance.
  • Удаан эдэлгээтэй барилга: Made from die-cast aluminum alloy body and PC lampshade, resistant to rust, yellowing, high temperatures, and impacts.
  • IP65 Усны хамгаалалт: Designed for outdoor use, resistant to various weather conditions.
Бүтээгдэхүүний хэмжээ, бүрэлдэхүүн хэсгүүдийг харуулсан диаграмм

Figure 3.1: Product dimensions and key components including high-quality LED chip, die-cast aluminum lamp body, and PIR motion sensor.

4. Техникийн үзүүлэлтүүд

АтрибутҮнэ цэнэ
БрэндDELIPOP
Загвар24W LED Wall Light with Motion Sensor
Хэмжээ (L x W x H)29 x 10 x 9 см (11.41 x 3.93 x 3.54 инч)
Жин1.8 Kilograms (per unit, for 2 units)
БотьtageХувьсах гүйдэл 85V-265V
Хүч24 ватт
Гэрлийн урсгал2370 люмен
Өнгөний температур3000К Халуун цагаан
МатериалХөнгөн цагаан, Поликарбонат (PC)
Усны хамгаалалттай үнэлгээIP65
Хөдөлгөөн мэдрэгчийн өнцөг120°
Хөдөлгөөн мэдрэгчийн хүрээ3-8 метр (10-26 фут)
Автомат унтрах сааталApprox. 15 seconds (after no motion)
Амьдрах хугацаа> 50,000 цаг
Эрчим хүчний хэмнэлтийн ангилалE
EU Energy Efficiency Label showing class E

Figure 4.1: EU Energy Efficiency Label for the DELIPOP light. For more details, refer to the EPREL мэдээллийн сан (QR кодын холбоос).

5. Суулгах заавар

Чухал: Always ensure the main power supply is turned off before starting installation. It is recommended to have this product installed by a professional electrician.

  1. Суурилуулалтын талбайг бэлтгэх: Choose a suitable wall location, ideally between 1.8 to 2.5 meters (5.9 to 8.2 feet) high, for optimal motion sensor performance. Ensure the surface is clean and stable.
  2. Өрөмдлөгийн цэгүүдийг тэмдэглэх: Use the mounting bracket (if separate) or the fixture itself as a template to mark the drilling points on the wall.
  3. Өрөмдлөгийн цооног: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert wall anchors if necessary.
  4. Утас холбох: Carefully connect the household electrical wires to the light fixture's wires. Ensure correct polarity (Live, Neutral, Ground) according to local electrical standards. Use appropriate wire connectors and ensure all connections are secure and insulated.
  5. Тоног төхөөрөмжийг суурилуулах: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached and stable.
  6. Эрчим хүчийг сэргээх: Once installation is complete and all connections are secure, turn the main power supply back on.
DELIPOP LED wall light installed on an outdoor wall

Зураг 5.1: Жишээ ньample of the DELIPOP wall light installed on an exterior wall.

6. Ашиглалтын заавар

The DELIPOP LED wall light features an integrated motion sensor for automatic operation.

  • Өдрийн цагаар ажиллах: During daylight hours, the light will remain off to conserve energy, even if motion is detected.
  • Шөнийн цагаар ажиллах: When it is dark, the motion sensor becomes active. If motion is detected within its 3-8 meter range and 120° angle, the light will automatically turn on.
  • Автомат унтрах: The light will remain on as long as continuous motion is detected. Approximately 15 seconds after no motion is detected, the light will automatically turn off.
Diagram illustrating motion sensor operation: off during day, on at night with motion, stays on with continuous motion, off after 45 seconds of no motion.

Figure 6.1: Visual representation of the motion sensor's operational cycle, including daytime standby, nighttime activation, and automatic deactivation.

7. Арчилгаа, засвар үйлчилгээ

Regular cleaning and proper care will ensure the longevity and optimal performance of your DELIPOP wall light.

  • Цэвэрлэгээ: Цэвэрлэхийн өмнө цахилгааныг салга. Зөөлөн, d даавуугаар арчина.amp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагч эсвэл хүчтэй химийн бодис бүү хэрэглэ, учир нь эдгээр нь өнгөлгөө эсвэл эд ангиудыг гэмтээж болзошгүй.
  • Шалгалт: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, consult a qualified electrician.
  • LED: The integrated LED light source is designed for a long lifespan and is not user-replaceable.
Image showing the light's weather resistance against rain and snow

Figure 7.1: The DELIPOP wall light is designed to be IP65 waterproof and resistant to cold weather conditions.

8. Алдаа засах

If you encounter issues with your DELIPOP wall light, refer to the following common problems and solutions:

АсуудалБоломжит шалтгаанШийдэл
Шөнийн цагаар гэрэл асдаггүй.1. Цахилгаан хангамж байхгүй.
2. Мэдрэгч бөглөрсөн эсвэл эвдэрсэн.
3. Still too bright (daylight sensor active).		1. Check power connections and circuit breaker.
2. Ensure sensor is clean and unobstructed. Test sensor by waving hand.
3. Wait until it is sufficiently dark.
Гэрэл тасралтгүй асдаг.1. Continuous motion detected.
2. Мэдрэгч эвдэрсэн.		1. Ensure no constant movement (e.g., swaying branches, pets) is within sensor range.
2. Contact customer support if problem persists after checking for motion.
Гэрэл анивчих эсвэл бүдэгрэх.1. Тогтворгүй цахилгаан хангамж.
2. Сул холболтын утас.		1. Consult an electrician to check power stability.
2. Turn off power and check all wiring connections. Re-secure if loose.

9. Баталгаат хугацаа ба дэмжлэг

DELIPOP is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LED wall light, please contact DELIPOP customer service through your purchase platform.

Тодорхой баталгаат нөхцлүүдийг худалдан авах баримт бичгээс харна уу.