WORKPRO 16 Inch Wet Concrete Saw User Manual

1. Танилцуулга

Thank you for choosing the WORKPRO 16 Inch Wet Concrete Saw. This powerful tool is designed for efficient and precise cutting of concrete, stone blocks, and cement-based materials. Equipped with a 1600W motor and a wet cutting system, it ensures high performance while significantly reducing dust. Please read this manual thoroughly before operation to ensure safe and effective use of your saw.

2. Аюулгүй байдлын мэдээлэл

Таны аюулгүй байдал хамгийн чухал. Дараах аюулгүй байдлын удирдамжийг үргэлж дагаж мөрдөөрэй.

• Хутганы нийцтэй байдал: The included diamond blade is not suitable for cutting wood. If wood cutting is required, replace the blade with an appropriate one.
• Хувийн хамгаалах хэрэгсэл (PPE): Always wear appropriate safety gear, including safety goggles, gloves, hearing protection, and a dust mask, during operation.
• Wet Cutting Requirement: Always connect a water hose and ensure the wet cutting system is active while operating the saw to cool the blade and control dust.
• Dual Safety Switch: The saw features a dual-switch safety system. Both the power trigger and the safety lock switch must be engaged simultaneously to activate the machine, preventing accidental startups.
• Stable Workpiece: Ensure the material being cut is stable and securely supported to prevent movement during operation.
• Ажлын талбайг цэвэрлэх: Keep the work area clear of obstructions and bystanders.
• Эрчим хүчний хангамж: Ensure the power supply matches the saw's requirements and use a GFCI protected outlet.

3. Багцын агуулга

Савлахдаа доор жагсаасан бүх зүйл байгаа бөгөөд гэмтэлгүй эсэхийг шалгаарай.

• 1 16 Inch Concrete Saw
• 1 Carbon Brush
• 1 Wrench
• 1 Auxiliary Handle
• 1 Water Pump
• 2 Faucet Connectors
• 2 Water Hoses
• 1 User Instruction Manual (this document)

Image: The WORKPRO 16 Inch Wet Concrete Saw with all its components and accessories laid out.

4. Бүтээгдэхүүний онцлог ба бүрэлдэхүүн хэсгүүд

Familiarize yourself with the key parts of your WORKPRO Concrete Saw:

Image: Detailed diagram showing the various components of the concrete saw, including the adjustable blade guard, auxiliary handle, water pipe interface, safety lock, power switch, fender, rolling wheel, saw blade, and angle adjustment.

• Хүчтэй 1600Вт мотор: Delivers up to 3100 RPM for efficient cutting of tough materials.

Зураг: Дотоод view highlighting the robust 1600W motor, emphasizing its power and 3100 RPM capability for effortless cutting.
• Efficient Wet Cutting System: Integrates water flow directly onto the blade to cool it and significantly reduce dust and airborne particles.


Image: The concrete saw in operation, demonstrating the wet cutting feature with water effectively suppressing dust during a cut.

• Dual Safety Switch: Requires simultaneous engagement of the power trigger and safety lock to prevent accidental starts.


Зураг: Нарийвчилсан view of the saw's handle, illustrating the position of the power trigger and the safety lock switch, highlighting the dual safety mechanism.

• D-Shaped Handle & Roller Base: Provides a secure, comfortable grip and allows the tool to glide effortlessly for stable and accurate cuts.

Image: The saw positioned on a surface, showcasing its ergonomic D-shaped handle and the smooth-rolling base designed for improved control and mobility.
• Maximum 6.69 Inch Cutting Capacity: Allows for deep cuts, reducing the need for multiple passes.


Image: The concrete saw cutting into a block, with an overlay indicating its maximum cutting depth of 6.69 inches.

5. Тохируулах заавар

Follow these steps to prepare your WORKPRO Concrete Saw for operation:

1. Хутгыг суурилуулах: Press the lock pin and secure the spindle. Carefully install the diamond blade, ensuring it is oriented correctly. Tighten the bolt adequately with the provided wrench.
2. Release Spindle Lock: Rotate the blade by hand to ensure the spindle lock has released and the blade spins freely.
3. Усны системийг холбох: Install the wet-cutting water pipe and secure it in place. Connect the water hoses to the faucet connectors and then to a water source. Ensure the water pump is correctly installed and functioning.
4. Adjust Blade Guard: Adjust the blade guard to the appropriate depth for your cutting task.
5. Эрчим хүчний холболт: Connect the saw to a suitable power outlet.

Image: A visual guide illustrating the five key steps for setting up the concrete saw, from blade installation to water system connection and initial power-on.

6. Ашиглалтын заавар

Once set up, follow these steps for safe and effective operation:

1. Аюулгүй байдлыг хангах: Ensure you are wearing all necessary PPE.
2. Усны урсгалыг идэвхжүүлэх: Turn on the water supply to the wet cutting attachment. Ensure water is flowing to the blade before starting the saw.
3. Хөрөө эхлүүлэх: Engage both the power trigger and the safety lock switch simultaneously to start the motor.
4. Зүсэж эхлэх: Gently lower the saw onto the workpiece, allowing the blade to reach full speed before making contact. Feed the machine down in line with the blade, applying steady, even pressure. Do not force the saw.
5. Maintain Wet Cut: Continuously monitor the water flow to ensure the blade remains cool and dust is suppressed.
6. Бүрэн зүсэлт: Once the cut is complete, release the power trigger and safety lock. Allow the blade to stop spinning before lifting the saw from the workpiece.
7. Хэрэглээ: This saw is ideal for large stone blocks, house renovation, courtyard flooring, and house foundation work.

Image: A collage showing various applications of the concrete saw, including cutting large stone blocks, use in house renovation, courtyard floor projects, and house foundation construction.

7. Засвар үйлчилгээ

Regular maintenance ensures the longevity and optimal performance of your saw:

• Цэвэрлэгээ: After each use, disconnect the power and clean the saw thoroughly. Remove any concrete dust or debris from the blade, guard, and motor vents.
• Хутганы үзлэг: Regularly inspect the diamond blade for wear, cracks, or damage. Replace worn or damaged blades immediately.
• Усны систем: Flush the water lines and pump after use to prevent mineral buildup and blockages.
• Нүүрстөрөгчийн сойз: Periodically check the carbon brushes for wear. Replace them when they are significantly worn to maintain motor performance. (A spare carbon brush is included).
• Хадгалах: Store the saw in a clean, dry place, away from direct sunlight and moisture.

8. Алдаа засах

Хэрэв танд асуудал тулгарвал дараах нийтлэг асуудал, шийдлүүдийг үзнэ үү.

Хэрэв эдгээр шийдлүүдийг туршиж үзсэний дараа асуудал арилахгүй бол WORKPRO хэрэглэгчийн дэмжлэгтэй холбогдоно уу.

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or service inquiries, please contact WORKPRO customer service through their official webтухайн бүтээгдэхүүнийг худалдаж авсан сайт эсвэл жижиглэн худалдаалагч. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.

Үйлдвэрлэгч: Hang Zhou Great Star Industrial Co., Ltd.