RAINPOINT Solar Automatic Irrigation System

1. Танилцуулга

Thank you for choosing the RAINPOINT Solar Automatic Irrigation System. This system is designed to provide efficient and automated watering for your plants in gardens, balconies, and greenhouses, utilizing solar power for sustainable operation. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Key features of the RAINPOINT Solar Automatic Irrigation System: 2000mAh battery, 30-day super standby, IP65 waterproof, 121 timer modes, and 45L/H flow rate.

2. Аюулгүй байдлын мэдээлэл

Төхөөрөмжийг гэмтээх, гэмтээхээс урьдчилан сэргийлэхийн тулд дараах аюулгүй байдлын дүрмийг дагаж мөрдөнө үү.

• Ensure all connections are secure before operating the system to prevent leaks.
• Do not submerge the main control unit in water. It is water-resistant, not submersible.
• Үр ашигтай цэнэглэхийн тулд нарны хавтанг цэвэр байлгаарай.
• Төхөөрөмжийг өөрөө задлах, засах гэж бүү оролдоорой. Тусламж авахын тулд хэрэглэгчийн дэмжлэгтэй холбоо барина уу.
• Position the water source (bucket/reservoir) below or at the same level as the pump for optimal performance. The pump has a 3-meter lift height.
• Protect tubing from sharp objects or excessive tension to avoid damage.

3. Хайрцагт юу байна

Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу.

Нарийвчилсан view of all included components for the RAINPOINT Solar Automatic Irrigation System.

• 1 x Solar Water Pump (with integrated solar panel)
• 1 х газрын гадас
• 1 x Main Tube (Ø4 mm x 15 m)
• 1 x Branch Tube (Ø3 mm x 5 m)
• 1 x шүүлтүүр
• 3 x Tube End Caps
• 15 x Micro Drippers
• 15 x T-холбогч
• 1 x Cross Connector
• 1 x Anti-siphon Valve
• 2 x Screws (for wall mounting option)
• 10 х Кабелийн зангиа

4. Тохируулах заавар

1. Усны эх үүсвэрийг бэлтгэх: Place a water reservoir (e.g., a bucket or tank) in a suitable location. Ensure it is filled with water.
2. Position the Solar Pump:
   • Attach the ground stake to the solar pump unit.
   • Insert the stake into the ground near your plants, ensuring the solar panel faces direct sunlight for maximum charging efficiency.
   • Alternatively, use the provided screws to mount the pump unit on a wall or fence.
   

   The solar panel charges the internal battery even on cloudy days, providing up to 30 days of standby power.
3. Connect the Filter and Main Tube:
   • Connect one end of the main tube (Ø4 mm) to the pump's water outlet.
   • Attach the filter to the other end of the main tube and place the filter into your water reservoir. Ensure the filter is fully submerged.
4. Install the Anti-siphon Valve:

   Insert the anti-siphon valve into the main tube at a point higher than the water level in your reservoir. This prevents water from continuously siphoning out of the reservoir.

   

   The anti-siphon valve prevents accidental over-watering and backflow.
5. Distribute Tubing and Drippers:
   • Lay out the main tube to reach your plants.
   • Cut the main tube at desired points and insert T-connectors.
   • Connect the branch tube (Ø3 mm) to the T-connectors and run it to individual plants.
   • Insert a micro dripper into the end of each branch tube and place it near the base of the plant.
   • Use the cross connector for parallel irrigation to ensure uniform distribution to up to 15 pots.
   

   RAINPOINT's cross connector enables parallel irrigation for uniform water distribution to multiple plants.

6. Аюулгүй хоолой: Use the provided cable ties to secure the tubing and prevent kinks or dislodgement.
7. Seal Unused Ends: Use the tube end caps to seal any unused branch tube ends.

5. Ашиглалтын заавар

The RAINPOINT system features dual knob control for easy programming.

The control unit with dual knobs for setting watering duration and frequency.

1. Услах хугацааг тохируулах:

   -г ашиглана уу "HOW LONG" knob to select the desired watering duration per cycle. Options range from 10 seconds to 20 minutes.
2. Услалтын давтамжийг тохируулах:

   -г ашиглана уу "HOW OFTEN" knob to select how frequently the system waters. Options range from every 8 hours to every 30 days.

3. Гар аргаар услах:

   Press the central button for instant manual watering. The system will water for the duration set by the "HOW LONG" knob, then resume the programmed cycle.

4. Таймерын 121 горим:

   The combination of duration and frequency settings provides 121 different watering options, allowing you to customize watering schedules for various plant types and environmental conditions.

   

   Example watering schedules for indoor and outdoor plants, demonstrating the flexibility of the 121 timer configurations.

6. Засвар үйлчилгээ

• Шүүлтүүрийг цэвэрлэх: Regularly check and clean the water filter to prevent blockages and ensure consistent water flow.
• Усны түвшинг хянах: Ensure your water reservoir always has sufficient water. The system features an LED alarm that indicates low water levels.
• Цэвэр нарны хавтан: Wipe the solar panel periodically with a soft, damp cloth to remove dust and debris, ensuring optimal charging.
• Check Tubing and Drippers: Inspect all tubing and drippers for blockages, kinks, or damage. Clean drippers if they become clogged.
• Өвлийн агуулах: In freezing conditions, drain all water from the system and store the pump and tubing indoors to prevent frost damage.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

RAINPOINT products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your Solar Automatic Irrigation System, please contact RAINPOINT customer service through the retailer where you purchased the product or visit the official RAINPOINT webсайт.

Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.