Hemudu Dual Monitor Articulating Desk Mount Arm Stand

1. Бүтээгдэхүүн дууссанview

The Hemudu Dual Monitor Articulating Desk Mount Arm Stand (Model HD04W-001P) is designed to enhance your workspace by supporting two computer monitors in a vertical stack configuration. This stand provides ergonomic benefits, helps relieve strain on the neck, back, and shoulders, and optimizes desktop space. It is compatible with a wide range of monitors and offers versatile adjustability for a customized viewтуршлага.

Гол онцлогууд:

• Screen Compatibility: Supports two screens from 13 to 34 inches, each weighing up to 44 pounds (20 kg).
• VESA-ийн нийцэл: Compatible with VESA mounting patterns of 75x75mm and 100x100mm.
• Эргономик дизайн: Allows monitors to be raised to an ergonomic height, reducing physical strain.
• Multifunction Adjustments: Offers -15° to +10° tilt, -50° to +50° swivel, 360° rotation, and 4+8 level height adjustments along the central pole.
• Суулгах сонголтууд: Supports both C-clamp ба төмрийг холбох аргууд.
• Кабелийн менежмент: Integrated detachable cable clips keep power and AV cables organized.
• Зай хэмнэх: Holds two monitors on a single stand, freeing up valuable desktop space.

2. Аюулгүй байдлын мэдээлэл

Суурилуулах болон ашиглахын өмнө бүх зааврыг анхааралтай уншина уу. Эдгээр зааврыг дагаж мөрдөөгүй тохиолдолд эд хөрөнгийн хохирол, ноцтой гэмтэл бэртэл, эсвэл үхэлд хүргэж болзошгүй. Хэрэв та эдгээр зааврыг ойлгохгүй байгаа эсвэл угсралтын аюулгүй байдалд эргэлзэж байвал хэрэглэгчийн дэмжлэгтэй холбогдоно уу.

• Жингийн багтаамж: Do not exceed the maximum weight capacity of 44 lbs (20 kg) per monitor. Overloading may cause instability and potential injury.
• Мониторын хэмжээ: Ensure your monitors are within the supported size range of 13 to 34 inches.
• VESA нийцтэй байдал: Verify that your monitors have VESA mounting holes (75x75mm or 100x100mm) before installation.
• Ширээний зузаан: Ensure your desk surface is strong enough to support the combined weight of the stand and monitors. For C-clamp installation, the desk thickness should be within the specified range (typically up to 2.9 inches or 74mm).
• Аюулгүй суурилуулалт: Always ensure all screws and bolts are securely tightened before placing monitors on the stand.
• Кабелийн менежмент: Route cables carefully to prevent pinching or snagging, which could damage cables or cause monitors to fall.
• Хүүхэд ба тэжээвэр амьтад: Keep children and pets away from the monitor stand during installation and adjustment.

3. Багцын агуулга

Please check the package contents against the list below to ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Үндсэн туйлын угсралт
• Monitor VESA Plates (x2)
• C-Clamp Ассемблей
• Громмет бэхэлгээний бүрэлдэхүүн хэсгүүд
• Кабелийн менежментийн клипүүд
• Hardware Kit (screws, washers, spacers for VESA mounting)
• Tools (Allen keys, wrench)
• Зааварчилгааны гарын авлага

4. Тохиргоо ба суурилуулалт

The Hemudu Dual Monitor Arm Stand offers two primary installation methods: C-clamp and Grommet mounting. Choose the method best suited for your desk.

4.1 Choose Your Mounting Method

4.2 C-Clamp Installation (Method 1)

1. C-cl-ийг хавсаргана ууamp суурь нь гол туйлын ёроолд хүрнэ.
2. C-cl-ийг байрлуулamp Таны ширээний ирмэг дээр.
3. C-cl-ийг чангалнаamp screw until the stand is securely fastened to the desk. Ensure the desk thickness does not exceed 74mm (2.9 inches).

4.3 Grommet Mounting (Method 2)

1. If your desk has an existing grommet hole, remove its cover. If not, you may need to drill a hole (consult a professional if unsure).
2. Assemble the grommet mount components to the main pole.
3. Insert the pole through the grommet hole and secure it from underneath the desk using the provided plate and nut.

4.4 Мониторуудыг холбох

1. Attach the VESA plates to the back of your monitors using the appropriate screws, washers, and spacers from the hardware kit. Ensure the VESA pattern matches (75x75mm or 100x100mm).
2. Slide the VESA plates with attached monitors onto the mounting brackets on the main pole.
3. Secure the monitors to the brackets using the reinforcement knobs or screws as indicated in the diagram.

4.5 Кабелийн менежмент

Utilize the integrated cable management clips on the main pole to route and organize your monitor cables. This helps maintain a clean and clutter-free workspace.

4.6 Суулгах видео гарын авлага

Суулгах үйл явцын талаарх харааны гарын авлагыг доорх албан ёсны бүтээгдэхүүний видеоноос үзнэ үү.

5. Ажиллагаа ба тохируулга

The Hemudu Dual Monitor Arm Stand offers extensive adjustability to achieve your preferred viewing angles and ergonomic setup.

5.1 Өндөр тохируулга

The monitors can be adjusted vertically along the main pole. The stand features 4+8 level height adjustments, allowing you to position each monitor at an optimal height for your comfort.

5.2 Налалтын тохируулга

Each monitor can be tilted from -15° to +10°. Use the reinforcement knob on the VESA plate to adjust the tilt angle and then tighten it to secure the position.

5.3 Эргэлтийн тохируулга

Monitors can be swiveled -50° to +50° horizontally. This allows for flexible screen sharing or adjusting the viewбүхэл бүтэн суурийг хөдөлгөхгүйгээр өнцгийг өөрчлөх.

5.4 Rotation Adjustment

Monitors can be rotated 360° (portrait to landscape and vice versa) for different viewing orientations. Simply rotate the monitor to the desired position.

6. Засвар үйлчилгээ

Regular maintenance ensures the longevity and optimal performance of your Hemudu Dual Monitor Arm Stand.

• Цэвэрлэгээ: Тавиурыг зөөлөн арчиж арчих, damp даавуу. Өнгөлгөөг гэмтээж болзошгүй зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэхээс зайлсхий.
• Битүүмжлэл шалгах: Periodically check all screws and connections, especially the C-clamp/grommet mount and VESA plate screws, to ensure they remain tight. Re-tighten if necessary.
• Кабелийн үзлэг: Regularly inspect cables for any signs of wear or damage. Replace damaged cables immediately.

7. Алдаа засах

If you encounter any issues with your monitor stand, refer to the following common problems and solutions:

7.1 Monitor Sagging or Not Holding Position

• Шалтгаан: Tilt or swivel tension is too loose.
• Шийдэл: Locate the reinforcement knobs or tension screws on the VESA plate and tighten them until the monitor holds its position securely.

7.2 Босоо байдал тогтворгүй байна

• Шалтгаан: C-clamp or grommet mount is not sufficiently tightened, or desk surface is too thin/weak.
• Шийдэл: C-cl-г дахин чангална ууamp or grommet mount. Ensure your desk meets the minimum thickness and strength requirements. If using C-clamp, verify the desk thickness is within 74mm.

7.3 Difficulty Adjusting Height

• Шалтгаан: Mounting brackets are too tight on the pole, or debris is obstructing movement.
• Шийдэл: Loosen any screws that secure the mounting brackets to the pole slightly. Clean the pole and bracket channels if any obstruction is visible.

7.4 Monitors Not Aligned

• Шалтгаан: Monitors are not positioned correctly on the VESA plates or the VESA plates are not at the same height on the pole.
• Шийдэл: Adjust the height of each VESA plate independently along the pole. Ensure monitors are centered on their respective VESA plates.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

Hemudu products are manufactured with quality and care. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact our customer support.

Хэрэглэгчийн дэмжлэг:

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Hemudu customer support through the retailer's platform or the official Hemudu website. Please have your product model number (HD04W-001P) and purchase information ready when contacting support.