1. Танилцуулга
The LOKLiK Cutting Machine is a versatile tool designed for crafters to precisely cut a wide range of materials, including vinyl, paper, faux leather, and glitter cardstock. This machine is compatible with HTVRONT craft materials and offers features such as matless cutting for smart materials and integration with the LOKLiK IdeaStudio software. This manual provides essential information for the safe and effective use of your cutting machine and accompanying HTV vinyl.
Image 1.1: The LOKLiK Cutting Machine, a compact and efficient craft cutter.
2. Аюулгүй байдлын мэдээлэл
Please read all safety instructions before operating the LOKLiK Cutting Machine to prevent injury or damage to the device.
- Машиныг уснаас хол байлга эсвэлamp орчин.
- Цахилгааны утас гэмтээгүй, тохирох цахилгаан залгуурт зөв холбогдсон эсэхийг шалгаарай.
- Keep hands and loose clothing away from moving parts, especially the blade area, during operation.
- Зөвхөн зөвшөөрөгдсөн дагалдах хэрэгсэл, сэлбэг хэрэгслийг ашиглана уу.
- Do not attempt to disassemble or repair the machine yourself. Contact customer support for assistance.
- Ашиглаагүй үедээ машиныг цэвэр, хуурай газар хадгална уу.
3. Багцын агуулга
Таны багцад бүх зүйл байгаа эсэхийг шалгана уу:
- LOKLiK Cutting Machine
- Эрчим хүчний адаптер
- USB кабель
- Fine Cutting Tool (pre-installed or included)
- Writing/Drawing Tool
- Heat Transfer Vinyl (HTV) Roll (e.g., White HTV Rolls - 12" x 20ft)
- Free Weeding Tool
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
Note: Deep cutting, scoring, and foil printing tools are sold separately.
Image 3.1: An HTV vinyl roll, illustrating its key features: easy to cut, weed, and transfer, great stickiness, machine washable, and includes a free weeding tool.
4. Тохиргоо
4.1 Савлах ба байрлуулах
- Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
- Place the LOKLiK Cutting Machine on a stable, flat surface with adequate space around it for material loading and operation.
- Attach the removable storage cup to organize your work area.
4.2 Эрчим хүчний холболт
Connect the power adapter to the machine's power port and then plug it into a wall outlet.
4.3 Software Installation (LOKLiK IdeaStudio)
The LOKLiK Cutting Machine pairs with the LOKLiK IdeaStudio software. This software offers over 50,000 free designs, various creative fonts, and an AI painting feature without a subscription fee.
- Visit the official LOKLiK website to download the latest version of LOKLiK IdeaStudio.
- Програм хангамжийг компьютер дээрээ суулгахын тулд дэлгэцэн дээрх зааврыг дагана уу.
Image 4.1: The LOKLiK IdeaStudio software interface, showing design options and connectivity features.
4.4 Компьютерт холбогдох
You can connect the cutting machine to your computer via Bluetooth or USB.
- USB холболт: Connect one end of the USB cable to the machine and the other end to an available USB port on your computer.
- Bluetooth холболт: Turn on Bluetooth on your computer and the cutting machine. Follow the pairing instructions in the LOKLiK IdeaStudio software to connect wirelessly.
5. Ашиглалтын заавар
5.1 Ерөнхий үйл ажиллагаа дуусахview
The LOKLiK Cutting Machine supports various functions including fine cutting, writing, drawing, deep cutting, scoring, and foil printing. This section focuses on the cutting process, particularly with HTV vinyl.
Image 5.1: The LOKLiK Cutting Machine demonstrating its versatility for different craft projects and compatible tools like fine cutting, deep cutting, writing/drawing, scoring, and foil printing.
5.2 Using LOKLiK IdeaStudio Software
- Launch LOKLiK IdeaStudio on your computer.
- Select or create your design. Utilize the vast image library, creative fonts, or the AI painting feature to generate unique designs.
- Adjust the design size and placement as needed for your material.
Image 5.2: The AI-generated designs feature within LOKLiK IdeaStudio, allowing users to create custom images from text prompts.
5.3 Material Preparation (HTV Vinyl)
Proper preparation of your HTV vinyl is crucial for successful cuts and transfers.
- Identify Cutting Side: For HTV, the matte side is the cutting side, and the glossy side is the ironing side (carrier sheet). Always cut on the dull, matte side.
- Хамгаалалтын хальс: Some HTV rolls may have a clear protective film on the glossy side. Ensure this is not confused with the carrier sheet.
- Mirror Your Design: When working with HTV, always mirror your design in the software before cutting, as it will be applied face down.
Image 5.3: Visual guide to identifying the cutting (matte) and ironing (glossy) sides of HTV vinyl, along with the protective film.
Image 5.4: Demonstrating how to identify and cut on the dull side of the HTV vinyl.
5.4 Зүсэх үйл явц
- Материалыг ачаалах: For matless cutting, load smart materials (up to 21 ft long and 13 in wide) directly into the machine. For other materials, place them on a cutting mat (sold separately) and load the mat.
- Тохиргоог сонгоно уу: In LOKLiK IdeaStudio, choose the correct material type. The software will suggest appropriate blade force and speed. Refer to the table below for general guidelines for HTV:
| Машин | Ир | Хүч | Хурд | Дамжуулдаг | Материалын горим |
|---|---|---|---|---|---|
| For Cricut (Previous HTV) | Стандарт | Төмөр дээр + | Үгүй | Үгүй | Төмөр дээр + |
| For Cricut (2021 Updated HTV) | Стандарт | Iron on | Үгүй | Үгүй | Iron on |
| For Cameo 3 | Ир-1 | Хүч-5 | Speed-5 | Passes-2 | Гөлгөр |
| For Cameo 4 | Ир-3 | Хүч-8 | Speed-5 | Passes-2 | Гөлгөр |
ЖИЧ: If you receive 2021 updated HTV, there is a tip in the packaging to remind you.
Зураг 5.5: Ойрын зураг view of the LOKLiK Cutting Machine's blade executing an intricate design with precision.
Image 5.6: The LOKLiK Cutting Machine performing a matless full-length cut for a large wall decal, showcasing its capability with smart materials up to 21 feet.
5.5 Хогийн ургамал зулгаах
After cutting, use the provided weeding tool to remove the excess vinyl around your design. This process is made easier by the HTV's design for simple weeding.
5.6 Heat Transfer (for HTV Vinyl)
Once weeded, your HTV design is ready for transfer.
- Preheat your heat press or iron to the recommended temperature for your specific HTV type (typically around 305°F/150°C).
- Place your garment or item on a flat, heat-resistant surface.
- Position the HTV design (carrier sheet up) onto the garment.
- Apply even pressure with your heat press or iron for the recommended time (usually 10-15 seconds).
- Allow the design to cool slightly (warm peel) or completely (cold peel) as per your HTV instructions, then carefully peel off the carrier sheet.
The HTV vinyl is sensitive to temperature and pressure, ensuring a secure bond to fabric. It is designed to withstand over 50 machine washes at 40 degrees Celsius without fading, peeling, or cracking.
6. Засвар үйлчилгээ
6.1 Машиныг цэвэрлэх
- Regularly wipe the exterior of the machine with a soft, dry cloth.
- Use a small brush or compressed air to clear any dust or material debris from the cutting area and rollers.
- Цэвэрлэхийн өмнө машиныг залгуураас салгасан эсэхийг шалгаарай.
6.2 Ир солих
Blades will dull over time, affecting cut quality. Replace the blade when you notice inconsistent cuts or tearing of material.
- Машинаа унтраагаад салга.
- Carefully remove the blade housing from the carriage.
- Following the instructions for your specific blade housing, replace the dull blade with a new one.
- Reinsert the blade housing into the carriage.
7. Алдаа засах
If you encounter issues with your LOKLiK Cutting Machine, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Машин асахгүй байна | Loose power connection, faulty outlet | Check power cord connections. Try a different outlet. |
| Machine not connecting to software | USB cable issue, Bluetooth not paired, software glitch | Ensure USB cable is secure. Re-pair Bluetooth. Restart software and machine. Update drivers. |
| Poor cut quality (tearing, incomplete cuts) | Dull blade, incorrect blade settings, material loaded incorrectly | Replace blade. Adjust force/speed settings in software. Ensure material is loaded flat and correctly. |
| HTV not adhering to fabric | Insufficient heat or pressure, incorrect peel method | Increase heat press temperature or pressure. Ensure correct peel method (warm/cold). |
| HTV peeling/cracking after washing | Improper application, low-quality HTV | Ensure proper application technique. Use high-quality HTV like HTVRONT. |
For further assistance, please contact LOKLiK customer support.
8. Техникийн үзүүлэлтүүд
- Загвар: LOKLiK Cutting Machine
- Материалын нийцтэй байдал: 0.1mm to 2mm thickness (over 100 materials including vinyl, paper, faux leather, glitter cardstock)
- Matless Cutting: Supports smart materials up to 21 ft long and 13 in wide
- Cutting Accuracy: 0.5 мм хүртэл
- Холболт: Bluetooth, USB
- Програм хангамж: LOKLiK IdeaStudio (no subscription required, includes 50,000+ designs, AI painting)
- Чиг үүрэг: Fine cutting, writing, drawing (tools included); Deep cutting, scoring, foil printing (tools sold separately)
- Үйл ажиллагаа: Quieter operation with upgraded step-motor system and noise reduction technology
- ASIN: B0DSZGLJVL
- Эхний боломжтой огноо: 14 оны нэгдүгээр сарын 2025
9. Баталгаат хугацаа ба дэмжлэг
9.1 Баталгаат хугацааны мэдээлэл
For detailed warranty information, including coverage period and terms, please refer to the official HTVRONT website or the warranty card included with your product packaging. Keep your proof of purchase for warranty claims.
9.2 Хэрэглэгчийн дэмжлэг
If you require technical assistance, have questions about your product, or need to report an issue, please contact HTVRONT customer support through their official webсайт эсвэл таны бүтээгдэхүүний баримт бичигт заасан холбоо барих мэдээлэл.
