1. Бүтээгдэхүүн дууссанview
The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.
This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.
Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.
2. Тохируулгын мэдээлэл
Эдгээр гүйлтийн самбарууд нь дараах зорилгоор тусгайлан бүтээгдсэн:
- Тээврийн хэрэгсэл: 2024-2026 оны Toyota Tacoma
- Кабины төрөл: Double Cab (4 full-size doors)
- Тохиромжтой байдал: Includes Hybrid models
Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.
Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.
3. Тохиргоо ба суурилуулалт
3.1. Оруулсан бүрэлдэхүүн хэсгүүд
Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу:
- Жолоочийн талын гүйлтийн самбар
- Зорчигч талын гүйлтийн самбар
- All necessary hardware and mounting brackets
- Суулгах гарын авлага (энэ баримт бичиг)
3.2. Суулгах алхамууд
Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.
- Тээврийн хэрэгслийг бэлтгэх: Машинаа тэгш гадаргуу дээр байрлуулж, зогсоолын тоормосыг дарна уу.
- Суулгах цэгүүдийг тодорхойлох: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
- Хаалт хавсаргах: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
- Гүйлтийн самбарын байрлал: Carefully lift and align the running board with the attached brackets.
- Secure Running Board: Attach the running board to the brackets using the remaining hardware.
- Тохируулж, чангална уу: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
- Нөгөө талын хувьд давтана уу: Follow the same steps for the opposite side of the vehicle.
Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.
4. Ашиглалтын заавар
The Tyger Access Running Boards are designed for straightforward use. To operate:
- Ensure the running boards are securely installed before use.
- When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
- The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.
Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.
5. Засвар үйлчилгээ
To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:
- Тогтмол цэвэрлэгээ: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
- Шалгалт: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
- Хамгаалалт дуусгах: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.
Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.
6. Алдаа засах
If you encounter any issues with your running boards, consider the following:
- Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
- Ер бусын дуу чимээ: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
- Суулгахад хүндрэлтэй: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).
Эдгээр алхмуудаар шийдэгдээгүй байнгын асуудлуудын хувьд хэрэглэгчийн дэмжлэгтэй холбогдоно уу.
7. Техникийн үзүүлэлтүүд
| Загварын дугаар | TG-AS2T24003 |
| Брэнд | Тайгер Авто |
| Материал | Нүүрстөрөгчийн ган |
| Гаднах өнгөлгөө | Textured Black Powder E-Coating |
| Хэмжээ (L x W x H) | 76.69 x 7.24 x 5.59 инч |
| Зүйлийн жин | 39.2 фунт |
| Жингийн багтаамж | 500 фунт |
| Ground Clearance (approx.) | 15 инч |
| UPC | 810171270504 |
Image 7.1: Detailed dimensions of the Tyger Access Running Board.
Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.
8. Баталгаат хугацааны мэдээлэл
Tyger Auto provides a 5 жилийн баталгаат хугацаа for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.
9. Дэмжлэг
For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto webсайтаас авах эсвэл бүтээгдэхүүнийг худалдаж авсан жижиглэн худалдаачнаар дамжуулан тэдний хэрэглэгчийн үйлчилгээний хэлтэстэй холбогдоно уу.
Дэлгэрэнгүй мэдээлэл болон холбоо барих хаягийг хаягаас авах боломжтой Tyger Auto Store on Amazon.
