Lyman Accu-Prime Manual Bench Priming Tool Instruction Manual

Танилцуулга

This manual provides detailed instructions for the safe and effective use, setup, operation, maintenance, and troubleshooting of your Lyman Accu-Prime Manual Bench Priming Tool. Please read this manual thoroughly before operating the tool to ensure proper function and longevity.

Аюулгүй байдлын мэдээлэл

Always wear appropriate eye protection when operating this tool. Keep fingers clear of moving parts. Ensure the tool is securely mounted before use. Store primers and ammunition components safely and according to manufacturer guidelines.

Багцын агуулга

Хайрцагнаас задлахад бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу:

• Lyman Accu-Prime Bench Priming Tool assembly
• Small primer punch
• Large primer punch
• Small primer tray
• Large primer tray
• Суурилуулах тоног төхөөрөмж (эрэг)
• Хэрэглэх заавар (энэ баримт бичиг)

Image: The Lyman Accu-Prime Manual Bench Priming Tool, showing its robust construction and how a brass case is positioned for priming.

Тохиргоо

1. Mounting the Tool:

   Select a sturdy workbench or surface for mounting. Position the Accu-Prime tool and mark the locations for the two mounting screws. Drill pilot holes if necessary. Securely fasten the tool to the workbench using the provided mounting hardware. Ensure the tool is stable and does not wobble during operation.

   

   Image: The Accu-Prime tool securely mounted to a surface, highlighting the lever mechanism and base plate.

2. Selecting the Correct Primer Punch and Tray:

   The Accu-Prime tool comes with both small and large primer punches and trays. Identify the size of the primers you will be seating (Small Pistol/Rifle or Large Pistol/Rifle). Insert the corresponding primer punch into the tool's ram. Place the correct primer tray onto the tool's base, ensuring it clicks into place.

   

   Зураг: Ойрын зураг view of the Accu-Prime's top mechanism, illustrating where the primer punch is inserted and the primer tray attaches.

Ашиглалтын заавар

1. Loading Primers:

   Pour a small quantity of primers into the selected primer tray. Gently shake the tray to orient the primers anvil-side up. The tray is designed to automatically feed primers into the priming mechanism.

   

   Image: The Accu-Prime tool set up on a workbench, demonstrating the typical reloading environment with primers and brass cases ready for processing.
2. Priming a Case:

   Place a clean, decapped brass case onto the shell holder. Ensure the case is seated firmly. Slowly lower the operating lever. As the lever descends, a primer will be picked up from the tray and seated into the primer pocket of the case. Apply steady, even pressure until the primer is fully seated. You should feel a distinct "bottoming out" sensation, indicating the primer is flush or slightly below the case head.

   

   Зураг: Нарийвчилсан view of the priming process, showing a brass case being precisely primed by the Accu-Prime tool.

3. Inspecting Primers:

   After seating, remove the case and visually inspect the primer. It should be seated squarely and to the correct depth. An improperly seated primer can lead to misfires or other safety issues.

Засвар үйлчилгээ

• Цэвэрлэгээ:

  Regularly clean the tool to remove primer residue and other debris. Use a soft cloth and a mild solvent if necessary. Ensure all moving parts are free of obstructions.

• Тосолгоо:

  Apply a light coat of gun oil or similar lubricant to the pivot points and ram of the tool periodically to ensure smooth operation. Avoid over-lubrication, which can attract dirt.
• Хадгалах:

  When not in use, store the Accu-Prime tool in a clean, dry environment to prevent rust and corrosion. It is recommended to remove primer trays and punches for separate storage.

Note: The product's general care instructions mention "Hand Wash Only". For this metal tool, interpret this as cleaning with care using appropriate solvents and cloths, avoiding submersion in water.

Алдааг олж засварлах

Үзүүлэлтүүд

• Загварын дугаар: 7770075
• Үйлдвэрлэгч: Лайман
• Бүтээгдэхүүний төрөл: Manual Bench Priming Tool
• Тохиромжтой байдал: Small and Large Pistol/Rifle Primers
• Хэмжээ (ойролцоогоор): 7 x 5 x 2 инч (Багцын хэмжээ)
• Жин (ойролцоогоор): 1 Pound (Package Weight)
• Материал: Удаан эдэлгээтэй металл хийц
• Гарал үүсэл: АНУ-д үйлдвэрлэсэн эсвэл импортолсон

Баталгаат хугацааны мэдээлэл

Lyman products are manufactured to high standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Lyman webсайт. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.

Хэрэглэгчийн дэмжлэг

For technical assistance, replacement parts, or further inquiries, please contact Lyman Customer Service. Contact information can typically be found on the official Lyman webсайт эсвэл бүтээгдэхүүний сав баглаа боодол дээр.

Lyman Official Webсайт: www.lymanproducts.com