RAB Lighting B17 LED Bollard Light Instruction Manual

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Гол онцлогууд нь:

• Energy-efficient LED with a 50,000-hour lifespan.
• Тохируулах боломжтой ватtage: 24Вт, 19Вт, эсвэл 14Вт.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• Нойтон газруудад зориулсан UL жагсаалтад орсон.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Аюулгүй байдлын мэдээлэл

АНХААРУУЛГА: Цахилгаанд цохиулах эрсдэлтэй. Суурилуулах эсвэл үйлчилгээ үзүүлэхийн өмнө цахилгааныг салга. Суурилуулалтыг үндэсний болон орон нутгийн цахилгааны бүх холбогдох дүрэм журмын дагуу мэргэшсэн цахилгаанчин гүйцэтгэнэ.

• Нийлүүлэлтийн хэмжээг баталгаажуулахtage is correct for the fixture.
• Do not handle live components.
• Тохиромжтой хувийн хамгаалах хэрэгсэл (PPE) өмс.
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Бэхэлгээг бүү өөрчил. Аливаа өөрчлөлт нь баталгааг хүчингүй болгож, аюулгүй байдалд аюул учруулж болзошгүй.

3. Багцын агуулга

Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу.

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Хэрэглэх заавар (энэ баримт бичиг)

4. Тохиргоо ба суурилуулалт

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Суулгах газрыг бэлтгэх: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Цахилгааныг салгах: Turn off power at the circuit breaker before starting any electrical work.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Цахилгааны холболт хийх: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Бүх холболтууд найдвартай, тусгаарлагдсан эсэхийг шалгаарай.
5. Ватыг сонгоно ууtage ба CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Эрчим хүчийг сэргээх: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Ашиглалтын заавар

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24Вт: Хамгийн их тод байдал.
• 19Вт: Medium brightness, reduced energy use.
• 14Вт: Lower brightness, maximum energy savings.

Тохируулахын тулд: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Сонгох боломжтой өнгөний температур (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

Тохируулахын тулд: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. 0-10V Dimming

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Засвар үйлчилгээ

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Цэвэрлэгээ: Бэхэлгээний гадна талыг зөөлөн, үе үе цэвэрлэж байх damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• Шалгалт: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• LED солих: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting webтодорхой баталгаат нөхцөл, холбоо барих мэдээллийг авахын тулд сайт эсвэл таны худалдан авалтын баримт бичиг.

RAB Lighting Contact: www.rablighting.com