Танилцуулга
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Behringer P24 Personal Monitor. Designed for live performances, the P24 allows musicians to create their own custom monitor mix with ease, ensuring optimal sound clarity on stage. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
Аюулгүй байдлын чухал заавар
Always follow these basic safety precautions when using the P24 Personal Monitor:
- Төхөөрөмжийг нээж болохгүй casing. Дотор нь хэрэглэгчийн засвар үйлчилгээ хийх хэсэг байхгүй.
- Гал болон цахилгаан цочролоос сэргийлэхийн тулд төхөөрөмжийг бороо, чийгэнд бүү тавь.
- Зөв агааржуулалтыг хангах. Агааржуулалтын нүхийг хааж болохгүй.
- Зөвхөн үйлдвэрлэгчийн заасан цахилгаан адаптерийг ашиглана уу.
- Төхөөрөмжийг радиатор, халаалтын төхөөрөмж, зуух эсвэл бусад төхөөрөмж (үүнд орно) зэрэг дулааны эх үүсвэрийн ойролцоо байрлуулахаас зайлсхий ampөргөгч) дулаан үүсгэдэг.
- Цахилгааны утсыг гишгэх, хавчихаас хамгаалаарай, ялангуяа залгуур, залгуур, төхөөрөмжөөс гарах цэг дээр.
- Аянгын шуурганы үед эсвэл удаан хугацаагаар ашиглаагүй үед төхөөрөмжийг цахилгааны залгуураас салга.
- Бүх үйлчилгээг мэргэшсэн үйлчилгээний ажилтнуудад шилжүүлээрэй.
Тохиргоо
1. Савыг задлах
Carefully unpack your P24 Personal Monitor and inspect it for any signs of damage during transit. Retain the packaging materials for future transport or storage.
2. Холболтууд
The P24 connects to a compatible digital mixing console or StageConnect hub. Ensure all connections are secure before powering on the device.
- StageConnect Input: S-г холбоно ууtageConnect cable from your digital mixer or hub to the P24's StageConnect input. This connection typically provides both audio and power.
- Чихэвчний гаралт: Connect your in-ear monitors or headphones to the designated headphone output jack.
- AUX/MIC Input: If using an external auxiliary source or a local microphone, connect it to the AUX/MIC input.
3. Анхдагч асаалттай
Once all connections are made, power on the connected StageConnect system. The P24 will power on automatically and display its current firmware version on the P24M screen.
Ашиглалтын заавар
Figure 1: Behringer P24 Personal Monitor Front Panel. Энэ зураг дээрээс доошоо харуулж байна view of the Behringer P24 Personal Monitor. It features three main control sections: "TALKBACK VOLUME" on the left, "CHANNEL SETTINGS" in the center, and "OUTPUT VOLUME" on the right. Below these sections are twelve individual channel faders, numbered 1 through 12, and an additional fader for "AUX MIC". Each fader has a corresponding numbered button above it. The "TALKBACK VOLUME" section includes a "TALK" button and a rotary knob. The "CHANNEL SETTINGS" section features a small display labeled "P24M V0.2.8", a rotary knob, and "ADJUST PROCEED SETTINGS" text. The "OUTPUT VOLUME" section has a vertical LED meter indicating "LIMIT", "-3", "-6", "-9", "-12", "-18", "-30", and "SIG", along with a large rotary knob and the "behringer" logo.
1. Talkback Volume Control
The TALKBACK VOLUME section (left side of the unit) allows you to control the level of your talkback microphone. Press the ЯРИА button to activate the talkback function, and use the rotary knob to adjust the volume. This is useful for communicating with other musicians or the sound engineer.
2. Сувгийн тохиргоо
The СУВГИЙН Тохиргоо section (center of the unit) features a display and a rotary knob for advanced adjustments. The display shows the unit's model and firmware version (e.g., P24M V0.2.8). Use the rotary knob and the "ADJUST PROCEED SETTINGS" functionality to navigate and modify various channel parameters, such as EQ, panning, or effects sends, depending on the capabilities of the connected StageConnect system.
3. Гаралтын дууны хяналт
The БОТЬ ГАРГАХ section (right side of the unit) controls the overall volume of your personal monitor mix. Use the large rotary knob to adjust the master output level to your headphones. The vertical LED meter provides visual feedback on the output signal level, indicating when the signal is approaching or reaching its limit (clipping).
4. Individual Channel Faders
The P24 features twelve individual channel faders, numbered 1 дамжуулан 12, plus an additional AUX MIC fader. Each fader controls the volume of its corresponding input channel in your personal mix. Move the fader up to increase the volume and down to decrease it. The numbered buttons above each fader may provide additional functionality, such as muting or soloing the channel, depending on the system configuration.
5. Чихэвч ашиглан хяналт хийх
Connect your headphones or in-ear monitors to the headphone output. Adjust the individual channel faders and the master БОТЬ ГАРГАХ to create a comfortable and balanced personal mix. Ensure the volume is set to a safe listening level to prevent hearing damage.
Засвар үйлчилгээ
1. Цэвэрлэгээ
To clean the P24, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components. Ensure the unit is powered off and disconnected from all sources before cleaning.
2. Хадгалах
When not in use for extended periods, store the P24 in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage to protect against dust and physical damage.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Төхөөрөмжид цахилгаан байхгүй байна. | StageConnect cable not connected or faulty; power source issue. | S-г баталгаажуулна ууtageConnect cable is securely connected. Verify the power source for the StageConnect system is active. Try a different StageConnect cable if available. |
| Чихэвчнээс дуу гарахгүй. | Headphones not connected; Output Volume too low; individual channel faders down; no signal from mixer. | Check headphone connection. Increase the БОТЬ ГАРГАХ knob. Raise individual channel faders. Verify that the mixer is sending audio to the StageConnect system. |
| Гажуудсан аудио. | Output Volume too high (clipping); input signal too hot from mixer. | -ийг багасгах БОТЬ ГАРГАХ. Check the LED meter for clipping and adjust accordingly. Inform the sound engineer to reduce the input signal level from the mixer. |
| Talkback microphone not working. | ЯРИА button not pressed; Talkback Volume too low; microphone issue. | дээр дарна уу ЯРИА button. Increase the TALKBACK VOLUME knob. Ensure the microphone is properly connected and functional. |
Үзүүлэлтүүд
- Загвар: P24
- Загварын дугаар: 0609-AAM86-US1
- Брэнд: Берингер
- Бүтээгдэхүүний хэмжээ: 8" D x 12" W x 3" H (20.32 см D x 30.48 см W x 7.62 см H)
- Барааны жин: 3.78 фунт (1.71 кг)
- Холболтын технологи: Auxiliary, StageConnect
- Сувгийн тоо: 2
- Үйлдвэрлэгч: MusicTribe
Баталгаат хугацааны мэдээлэл
Behringer products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official Behringer website or contact their customer support. Please retain your proof of purchase for warranty claims.
Хэрэглэгчийн дэмжлэг
For technical assistance, service, or further inquiries about your Behringer P24 Personal Monitor, please visit the official Behringer support page or contact their customer service department. Contact information can typically be found on the manufacturer's webсайт.
