SRNE SL2410 PWM Solar Charge Controller User Manual

1. Танилцуулга

This manual provides essential information for the safe and efficient operation of your SRNE SL2410 PWM Solar Charge Controller. The SL2410 is a 12V/24V auto-sensing, 10A Pulse Width Modulation (PWM) solar charge controller designed for various solar power systems, including street lights and monitoring devices. It features an IP67 waterproof rating and an aluminum shell for enhanced durability.

Гол онцлогууд:

• 12V/24V системийн ботьtage auto-detection.
• LED numeric display and waterproof keys for easy operation.
• Нарийвчилсан 3-сtage PWM charging algorithm for battery health.
• Support for multiple battery types: sealed, GEL, flooded lead-acid, ternary-material lithium, and lithium iron phosphate.
• Five load working modes for diverse applications.
• External temperature sensor for precise temperature compensation.
• Power-down saving function for parameter retention.
• Comprehensive protections: overcharge, over-discharge, overload, short-circuit, reverse-connection, and TVS lighting protection.

Зураг 1: Урд view of the SRNE SL2410 PWM Solar Charge Controller, showing the display, keys, and cable connections.

2. Аюулгүй байдлын мэдээлэл

Please read all instructions carefully before installation and operation to prevent damage to the controller, battery, or other components.

• Ensure all wiring is correct and connections are secure before applying power. Incorrect wiring can cause damage.
• Эхлээд батерейг, дараа нь нарны хавтан, эцэст нь ачааллыг үргэлж холбоно уу. Урвуу дарааллаар салга.
• Хянагчийг задлах, засах гэж бүү оролдоорой. Үйлчилгээ авахын тулд мэргэшсэн ажилтнуудтай холбоо барина уу.
• Хянагчийг шатамхай материалаас хол, агааржуулалт сайтай газар байрлуулна.
• Although the controller has an IP67 waterproof rating, avoid submerging it in water or exposing it to extreme conditions beyond its operating temperature range.
• Системийн эзлэхүүнийг баталгаажуулна ууtage (12V or 24V) matches the controller's auto-detection capability and your battery bank.
• Use appropriate circuit breakers or fuses for the solar panel, battery, and load circuits.

3. Бүтээгдэхүүн дууссанview болон бүрэлдэхүүн хэсгүүд

The SRNE SL2410 controller features a compact design with clearly labeled connection points and indicators.

Figure 2: Diagram showing the main components and indicators of the SRNE SL2410 controller.

Бүрэлдэхүүн хэсгүүдийн таних тэмдэг:

• Төлбөрийн үзүүлэлт: Displays the status of solar charging.
• Зайны үзүүлэлт: Shows the battery's charge level and status.
• Ачааллын үзүүлэлт: Indicates the status of the connected load.
• Түлхүүр: Цэс рүү шилжих, сонголтыг баталгаажуулахад ашигладаг.
• Горим: Used for changing operating modes and settings.
• Холболтын утаснууд: Pre-wired cables for solar panel, battery, and load connections.
• Температур мэдрэгч: External sensor for accurate battery temperature compensation.

4. Тохиргоо ба суурилуулалт

Proper installation is crucial for the controller's performance and longevity.

4.1 Холболтын схем

Follow the wiring sequence carefully to avoid damage.

Figure 3: Wiring diagram illustrating connections for the solar panel, battery, and load.

Утас тавих үе шатууд:

1. Батерейг холбоно уу: Connect the battery's positive and negative terminals to the corresponding battery connection leads on the controller. Ensure correct polarity. The controller will automatically detect the system voltage (12V эсвэл 24V).
2. Нарны хавтанг холбох: Connect the solar panel's positive and negative terminals to the corresponding solar panel connection leads on the controller. Ensure correct polarity.
3. Ачааллыг холбоно уу: Connect the load's positive and negative terminals to the corresponding load connection leads on the controller. Ensure correct polarity.

Чухал: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load, then solar panel, then battery.

4.2 Суурилуулалт

The controller should be mounted in a location that allows for adequate air circulation. Refer to the dimensions below for installation planning.

Figure 4: Installation dimensions for the SRNE SL2410 controller (dimensions in mm).

Хянагчийн хэмжээс: 82mm (length) x 58mm (width) x 20mm (height).

5. Ашиглалтын заавар

The SRNE SL2410 controller is designed for user-friendly operation with its LED display and waterproof keys.

5.1 LED төлөвийн заалт

The controller provides visual feedback through its LED indicators:

5.2 параметрийн тохиргоо

The controller allows for various parameter settings using the 'Mode' and 'Key' buttons. The power-down saving function ensures that your settings are retained even after power loss.

• Батерейны төрөл сонголт: The controller supports sealed, GEL, flooded lead-acid, ternary-material lithium, and lithium iron phosphate batteries. Refer to the controller's display and manual for specific steps to select the correct battery type.
• Load Working Modes: Up to 5 load working modes are available, facilitating application to different types of road lamps and monitoring devices. Consult the detailed product documentation for instructions on configuring these modes.
• Температурын нөхөн олговор: The external temperature sensor ensures accurate charging voltage adjustments based on ambient temperature, optimizing battery life.

6. Засвар үйлчилгээ

The SRNE SL2410 is designed for low maintenance due to its robust IP67 rating and aluminum casing. However, periodic checks are recommended:

• Холболтуудыг шалгах: Periodically check all wiring connections for tightness and corrosion. Loose connections can cause voltage уналт болон хэт халалт.
• Хянагчийг цэвэрлэх: While waterproof, ensure the controller's surface is clean from dust and debris to maintain optimal heat dissipation. Use a soft, dry cloth.
• Гүйцэтгэлийг хянах: Observe the LED indicators regularly to ensure the system is operating normally.

7. Алдаа засах

This section provides guidance for common issues. Refer to the LED Status Indication table in Section 5.1 for diagnostic help.

• Цахилгаангүй/Дэлгэц унтарсан: Check battery connections. Ensure the battery is charged above the controller's minimum operating voltage.
• No Charging (Charging LED off): Verify solar panel connections and ensure there is sufficient sunlight. Check for system over voltage (quick flashing Charging LED).
• Load Not Working (Load LED off): Check load connections. Ensure the battery is not under voltage (slow flashing Battery LED) or over-discharged (quick flashing Battery LED). Check for overload protection (slow flashing Load LED) or short-circuit protection (quick flashing Load LED).
• Battery Not Connected (Battery LED steady off): Recheck battery wiring and ensure secure connections.
• System Over Voltage (Charging LED quick flashing): Ensure the solar panel's open-circuit voltage нь хянагчийн хамгийн их оролтын хэмжээнээс хэтрэхгүй байнаtage.

If issues persist, consult the manufacturer or a qualified technician.

8. Техникийн үзүүлэлтүүд

Technical parameters for the SRNE SL2410 PWM Solar Charge Controller:

9. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.