Танилцуулга
Thank you for choosing the Voxelab FLASHFORGE AD5X 3D Printer. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read this manual carefully before use to ensure optimal performance and safety.
Аюулгүй байдлын чухал мэдээлэл
- Принтерийг үргэлж агааржуулалт сайтай газар ажиллуул.
- Ашиглалтын явцад гараа хөдөлж буй хэсгүүдээс хол байлга.
- The nozzle and print bed can reach high temperatures. Avoid direct contact during and immediately after printing.
- Use only recommended filaments and power supplies.
- Do not attempt to modify the printer or its components.
1. Тохиргоо ба угсралт
1.1 Хайрцагнаас задлах, бүрэлдэхүүн хэсгийг шалгах
Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана. Доор жагсаасан бүх зүйл байгаа бөгөөд гэмтэлгүй эсэхийг шалгана уу.
Figure 1: The Voxelab FLASHFORGE AD5X 3D Printer.
1.2 Багцын агуулга
The following items are included in your AD5X package:
Figure 2: Contents of the accessory package.
- AD5X 3D Printer (x1)
- Filament 10g (x4)
- Цахилгаан кабель (x1)
- IFS Connection Cable (x1)
- 4-Color Module (IFS) (x1)
- Spool Holder (x4)
- Display Screen (x1)
- Grease (x1)
- Кабелийн хавчаар (x1)
- Glue (x1)
- Аллен эрэг чангалах түлхүүр (x3)
- Diagonal Pliers (x1)
- Unclogging Tool (x1)
- Phillips Screwdriver (x1)
- 4-in-1 Guide Tube (x1)
- Суурилуулах хавтан (x1)
- M3x6 Шураг (x4)
- After-Sales Service Card (x1)
- Түргэн эхлэх гарын авлага (x1)
1.3 Анхны чуулган
Follow the quick start guide for initial assembly steps, which typically include attaching the display screen, installing the spool holders, and connecting the IFS module.
2. Онцлогууд дууссанview
2.1 Multi-Color Printing with IFS
The AD5X features an innovative Independent Filament System (IFS) allowing simultaneous 4-color printing without interruptions. This is ideal for complex designs and detailed prototypes.
Figure 3: Four-color printing in action.
Figure 4: Automatic filament switching for continuous printing.
2.2 Ultra-Rapid Printing Speed
Achieve print speeds up to 600 mm/s without compromising quality, saving significant time for professionals and enthusiasts.
Figure 5: High-speed printing capability.
Figure 6: Print time comparison highlighting rapid and precise printing.
2.3 Precise Automatic Leveling
The automatic calibration system ensures a perfectly leveled print bed, guaranteeing smooth prints without manual adjustments and perfect first layers every time.
Figure 7: Automatic print bed leveling in progress.
Figure 8: Effortless printing with automatic leveling and stable XY structure.
2.4 High-Temperature Nozzle and Material Compatibility
Equipped with a 300°C high-temperature nozzle, the AD5X supports a wide range of filaments including PLA, ABS, PETG, and TPU, suitable for various applications from prototyping to functional parts.
Figure 9: Quick-release nozzle with high-temperature capability.
Зураг 10: Жишээ ньamples of prints using various filament types.
3. Ашиглалтын заавар
3.1 Асаах/унтраах
Connect the power cable to the printer and a suitable power outlet. Press the power button located on the side/rear of the printer to turn it on. To power off, press the power button again and ensure the printer has cooled down.
3.2 Ачаалж буй утас
- Утасны ороомгийг зориулалтын ороомгийн эзэмшигч дээр байрлуулна.
- Feed the filament into the IFS module's input port.
- On the touchscreen, navigate to the filament loading menu and follow the on-screen prompts to load the filament into the nozzle.
3.3 Preparing a Model for Printing
The AD5X is compatible with slicing software such as Orca Slicer or Flashforge Slicer. Use these programs on your computer (Windows, macOS) to convert your 3D model files (e.g., STL, OBJ) into G-code, which the printer understands. Configure print settings like layer height, infill, and supports as needed.
3.4 Хэвлэх ажлыг эхлүүлэх
- G-кодыг шилжүүлэх file to the printer via USB disk, Wi-Fi, or Ethernet connection.
- On the printer's 4.3-inch touchscreen, select the desired file хэвлэх цэснээс.
- Confirm print settings and initiate the print. The printer will automatically perform bed leveling before starting the print.
3.5 Monitoring and Removing a Print
Monitor the printing process via the touchscreen. Once the print is complete and the print bed has cooled, carefully remove the printed object from the PEI flexible steel sheet. The flexible sheet allows for easy removal of prints.
4. Засвар үйлчилгээ
4.1 Nozzle Cleaning and Replacement
Regularly inspect the nozzle for clogs or wear. Use the provided unclogging tool to clear minor blockages. For severe clogs or worn nozzles, replace the quick-release nozzle as instructed in the detailed user manual.
4.2 Print Bed Care
Clean the PEI flexible steel sheet with isopropyl alcohol after each print to ensure optimal adhesion for future prints. Avoid using abrasive materials that could damage the surface. If adhesion issues persist, apply a thin layer of the provided glue stick.
4.3 Ерөнхий цэвэрлэгээ
Keep the printer free from dust and filament debris. Use a soft cloth to wipe down the exterior surfaces. Periodically check and clean the guide rails and lead screws, applying a small amount of grease as needed to ensure smooth movement.
5. Алдаа засах
5.1 Хэвлэхтэй холбоотой нийтлэг асуудлууд
- Эхний давхаргын наалдац муу: Ensure the print bed is clean, properly leveled, and the nozzle temperature is correct for the filament type.
- Filament Clogging: Check for debris in the nozzle, ensure proper filament loading, and verify the hotend temperature is sufficient.
- Давхаргын шилжилт: Inspect belts and pulleys for looseness or damage. Ensure the printer is on a stable surface.
- Хэвлэх чанар муу: Review slicing software settings (e.g., print speed, retraction, cooling) and ensure filament is dry.
5.2 Алдааны мессеж
If the printer displays an error message, consult the detailed user manual or the manufacturer's support website for specific codes and solutions. Common errors may relate to temperature sensors, motor issues, or filament detection.
6. Техникийн үзүүлэлтүүд
Figure 11: Comparison of AD5X and AD5M models.
| Онцлог | Тодорхойлолт |
|---|---|
| Брэнд | Voxelab |
| Загвар | AD5X |
| Бүтээгдэхүүний хэмжээс | 44 x 51.5 x 44 см (17.3 x 20.3 x 17.3 инч) |
| Төхөөрөмжийн хэмжээ | 36.3 x 41.3 x 37.6 см (14.3 x 16.3 x 14.8 инч) |
| Зүйлийн жин | 11 кг (24.25 фунт) |
| Бүтээлийн хэмжээ | 220 x 220 x 220 мм (8.66 x 8.66 x 8.66 инч) |
| Хамгийн их хэвлэх хурд | 600 мм/с |
| Max Acceleration | 20,000 мм/с² |
| Цоргоны температур | 300 хэм хүртэл |
| Цоргоны диаметр | 0.4mm (Default), 0.25mm, 0.6mm, 0.8mm (Optional) |
| Хэвлэмэл ор | PEI Flexible Steel Sheet |
| Max Bed Temperature | 110°C |
| Утастай нийцтэй байдал | PLA, ABS, PETG, TPU, PETG-CF, PLA-CF |
| Холболт | USB, Wi-Fi, Ethernet |
| Үйлдлийн систем | Windows, macOS |
| Тохиромжтой захын төхөөрөмжүүд | Laptop, Tablet, PC |
| Дэлгэц | 4.3-inch Touch LCD Screen |
| Онцлог шинж чанарууд | 4-Color IFS, Automatic Leveling, Filament Detection, Resume Printing |
7. Баталгаат хугацааны мэдээлэл
The Voxelab FLASHFORGE AD5X 3D Printer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Voxelab webбаталгаат хугацаа болон хугацаатай холбоотой нарийвчилсан нөхцөл, нөхцөлийг сайтаас авна уу.
8. Хэрэглэгчийн дэмжлэг
For technical assistance, troubleshooting, or any questions regarding your Voxelab FLASHFORGE AD5X 3D Printer, please contact Voxelab customer support through their official website or the contact information provided on your service card. Online resources, FAQs, and firmware updates may also be available on the manufacturer's support page.
