1. Танилцуулга
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Tecmojo 1U Rack Mount SBC Shelf. This shelf is designed to securely house single-board computers (SBCs) such as Raspberry Pi and Jetson Nano, along with 2.5-inch HDDs/SSDs, within standard 10-inch server racks and network cabinets. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Аюулгүй байдлын мэдээлэл
- Always ensure the rack is stable and properly secured before installing the shelf or any equipment.
- Do not overload the shelf beyond its intended weight capacity.
- Суулгахдаа тохирох хэрэгслийг ашиглана уу.
- Keep small parts, such as screws and nuts, out of reach of children.
- Ensure proper ventilation around installed devices to prevent overheating.
3. Багцын агуулга
Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгаарай.
- 1 x Tecmojo 1U Rack Mount SBC Shelf
- 4 x 10-32 Mounting Screws
- 4 x 10-32 Cage Nuts
Image: The Tecmojo 1U Rack Mount SBC Shelf shown with the included 10-32 screws and cage nuts.
4. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Бүтээгдэхүүний хэмжээ (D x W x H) | 3.98 x 9.92 x 1.75 инч (101.2 x 252 x 44.45 мм) |
| Зүйлийн жин | 11.2 унц |
| Материал | Alloy Steel (Cold-rolled steel) |
| Rack Unit Size | 1U |
| Тохиромжтой байдал | Standard 10-inch server racks, Raspberry Pi, Jetson Nano, 2.5-inch HDD/SSD |
| Өнгө | Хар |
Image: Technical drawing illustrating the dimensions of the 1U Rack Mount SBC Shelf.
5. Тохиргоо ба суурилуулалт
The Tecmojo 1U Rack Mount SBC Shelf is designed for quick and easy installation into any standard 10-inch rack or cabinet.
- Суулгах байршлыг тодорхойлох: Choose the desired 1U space within your 10-inch server rack or network cabinet.
- Insert Cage Nuts: If your rack rails do not have threaded holes, insert the provided 10-32 cage nuts into the square holes on the rack rails at the chosen 1U height. Ensure the cage nuts are securely seated.
- Тавиурыг байрлуулах: Align the mounting holes on the front flanges of the SBC shelf with the holes on the rack rails (or the installed cage nuts).
- Тавиурыг хамгаалах: Insert the provided 10-32 mounting screws through the shelf flanges and into the rack rails/cage nuts. Tighten the screws evenly until the shelf is firmly secured to the rack. Do not overtighten.
Image: Visual representation of the simple installation process for the rack shelf.
Image: The 1U Rack Mount SBC Shelf shown securely installed within a 10-inch rack enclosure.
6. Operating (Mounting Devices)
The SBC shelf features pre-drilled holes with unique symbols to facilitate the mounting of various single-board computers and 2.5-inch storage devices.
- Identify Device Type: Locate the symbols on the shelf that correspond to your device (e.g., Raspberry Pi, Jetson Nano, 2.5" HDD/SSD).
- Align Device: Place your SBC or 2.5-inch HDD/SSD onto the shelf, aligning its mounting holes with the corresponding pre-drilled holes and symbols.
- Аюулгүй төхөөрөмж: Use appropriate screws (not included with the shelf) to secure your device to the shelf. Ensure the device is stable and does not move.
- Кабелийн менежмент: Utilize the open design and any available cutouts for efficient cable routing to maintain a tidy and organized setup.
Image: Close-up of the shelf surface showing the marked symbols for different device mounting patterns.
Image: The shelf demonstrating two Raspberry Pi boards securely mounted.
7. Засвар үйлчилгээ
To ensure the longevity and optimal performance of your Tecmojo 1U Rack Mount SBC Shelf, follow these simple maintenance guidelines:
- Цэвэрлэгээ: Wipe the shelf periodically with a soft, dry cloth to remove dust and debris. For stubborn marks, a slightly damp даавууг хэрэглэж, дараа нь шууд хатааж болно. Зүлгүүрийн цэвэрлэгч эсвэл уусгагчаас зайлсхий.
- Шалгалт: Regularly check all mounting screws and nuts to ensure they remain tight. Re-tighten if necessary.
- Агааржуулалт: Ensure that the ventilation slots on the shelf and within your rack are not obstructed to allow for proper airflow around your devices.
8. Алдаа засах
If you encounter any issues with your Tecmojo 1U Rack Mount SBC Shelf, consider the following common solutions:
- Shelf does not fit in rack: Verify that your rack is a standard 10-inch width. Ensure you are attempting to install the shelf into a 1U space.
- Devices are not secure on the shelf: Confirm that you are using the correct type and size of screws for your specific SBC or HDD/SSD. Ensure screws are tightened appropriately.
- Shelf feels unstable: Double-check that all four mounting screws are properly installed and tightened into the rack rails. Ensure cage nuts (if used) are fully seated.
9. Баталгаат хугацаа ба дэмжлэг
Tecmojo products are manufactured to high-quality standards. For warranty information, technical support, or any inquiries regarding your Tecmojo 1U Rack Mount SBC Shelf, please refer to the official Tecmojo webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу. Баталгаат зарга авахын тулд худалдан авалтын баримтаа хадгална уу.
Онлайн дэмжлэг: -д зочилно уу Tecmojo Store on Amazon нэмэлт бүтээгдэхүүний мэдээлэл болон туслах эх сурвалжийг авах.
