BRPOM G20 8000A Jump Starter with 160PSI Air Compressor User Manual

1. Бүтээгдэхүүн дууссанview

The BRPOM G20 is a versatile multi-functional device designed for automotive emergencies and convenience. It integrates an 8000A peak current jump starter, a 160PSI tire inflator, a 26800mAh power bank, and a 600-lumen LED emergency light. This manual provides essential instructions for safe and effective use.

Image 1.1: The BRPOM G20 Jump Starter with its included accessories, including the air hose, various nozzles, USB-C cable, and smart clamps.

2. Аюулгүй байдлын мэдээлэл ба урьдчилан сэргийлэх арга хэмжээ

Энэ бүтээгдэхүүнийг хэрэглэхийн өмнө бүх аюулгүй байдлын анхааруулга, зааврыг уншина уу. Анхааруулга, зааврыг дагаж мөрдөөгүй тохиолдолд цахилгаанд цохиулах, гал түймэр гарах болон/эсвэл ноцтой гэмтэл бэртэлд хүргэж болзошгүй.

2.1 Аюулгүй ажиллагааны ерөнхий заавар

• Төхөөрөмжийг хүүхдээс хол байлга.
• Төхөөрөмжийг бороо, нойтон нөхцөлд бүү гарга.
• Хэрэв төхөөрөмж гэмтсэн эсвэл өөрчлөгдсөн бол түүнийг ажиллуулж болохгүй.
• Ашиглалтын явцад агааржуулалтыг сайтар хангана.
• Асаах асаагуурын cl-г богино холболтоор холбож болохгүйamps.
• Үргэлж эерэг (+) cl-ийг холбоно ууamp эерэг (+) батерейны терминал болон сөрөг (-) терминал руу холбоно ууamp сөрөг (-) зайны терминал эсвэл тээврийн хэрэгслийн явах эд анги руу.

2.2 Integrated Protection Technologies

The BRPOM G20 is equipped with 10 key protection technologies to ensure user and device safety:

• Хэт гүйдлийн хамгаалалт: Хэт их гүйдлийн улмаас гэмтэхээс сэргийлнэ.
• Хэт ихtage Хамгаалалт: Хамгаалалтууд ботьtage давалгаа.
Богино холболтын хамгаалалт: Богино холболт үүссэн тохиолдолд цахилгааныг автоматаар таслана.
• Урвуу туйлшралаас хамгаалах: Prevents damage from incorrect clamp холболт.
• Anti-Spark Protection: Холболтын үед оч үүсэхийг арилгана.
• Хэт их төлбөрөөс хамгаалах: Дотоод батерейг хэт цэнэглэхээс хамгаалдаг.
• Excessive Discharge Protection: Prevents deep discharge of the internal battery.
• Бага температурын хамгаалалт: Хүйтэн нөхцөлд аюулгүй ажиллагааг хангадаг.
• Өндөр температурын хамгаалалт: Төхөөрөмжийн хэт халалтаас сэргийлдэг.
• Хөндлөнгийн эсрэг хамгаалалт: Minimizes electromagnetic interference.

Image 2.1: Visual representation of the 10 integrated safety protections, including overcurrent, overvoltage, short-circuit, and reverse polarity protection.

2.3 Forced Start Mode Warning

Image 2.2: The forced start button, which allows immediate jump-starting of a completely discharged or low-voltage battery. Note: Automatic detection and safety protections are deactivated in this mode.

Warning: When using the forced start function, automatic detection and safety protections are deactivated. Use this mode with extreme caution and only when necessary, ensuring correct polarity connections.

3. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• BRPOM G20 Jump Starter with Air Compressor
• Robust Carrying Case
• 12V Battery Jump Cables (Smart Clamps)
• Removable Air Hose
• 4 Air Nozzles (for various inflatables)
• USB-C хурдан цэнэглэгч кабель
• Хэрэглэх заавар (энэ баримт бичиг)

Image 3.1: The complete set of equipment included in the BRPOM G20 package, designed to address power failures and air leaks in vehicles.

4. Тохиргоо болон анхны цэнэглэлт

4.1 Төхөөрөмжийг цэнэглэх

Before first use, fully charge the BRPOM G20. Connect the provided USB-C fast charging cable to the device's input port and a suitable USB power adapter (not included). The LCD screen will indicate the charging status. A full charge ensures optimal performance for jump-starting and air compression.

4.2 Бүрэлдэхүүн хэсгүүдийг тодорхойлох

Familiarize yourself with the device's ports, buttons, and display:

• LCD дэлгэц: Displays battery capacity, inflation mode, real-time air pressure, input/output status.
• Цахилгаан товч: Төхөөрөмжийг асаах/унтраах.
• 'M' товчлуур: Mode selection for air compressor.
• Гэрэл товчлуур: Cycles through LED light modes.
• '+' / '-' товчлуурууд: Adjusts pressure settings for the air compressor.
• 'OK' Button: Confirms selections and starts/stops inflation.
• Үсрэлт эхлүүлэх порт: For connecting the smart clamps.
• Агаарын хоолойн порт: For connecting the removable air hose.
• USB-C Input/Output Ports: For charging the device or external devices.

Image 4.1: The intelligent LCD screen provides real-time information on air pressure, inflation modes (car, motorcycle, bicycle, ball, custom), and input/output status.

5. Ашиглалтын заавар

5.1 Машинаа үсрэх

The BRPOM G20 can jump-start most 12V vehicles, including all gasoline engines and diesel engines up to 12L.

1. Step 1: Connect the Smart Clamps. Insert the blue plug of the smart clamps into the jump start port on the BRPOM G20. The clamp indicator light will flash alternately red and green.
2. Step 2: Connect to the Vehicle Battery. Attach the red positive (+) clamp тээврийн хэрэгслийн эерэг (+) аккумуляторын терминал болон хар сөрөг (-) клапанд холбоно ууamp to the vehicle's negative (-) battery terminal or a solid, unpainted metal part of the engine block. The clamp indicator light will turn solid green when correctly connected.
3. Step 3: Start the Vehicle. Start your vehicle's engine within 30 seconds. Once the engine starts, immediately remove the smart clamps from the vehicle battery, then disconnect them from the BRPOM G20.

Image 5.1: Illustrated steps for connecting the smart clamps and jump-starting a vehicle.

Image 5.2: The BRPOM G20 in action, connected to a car battery for jump-starting.

5.2 Агаарын компрессор ашиглах нь

The integrated air compressor can inflate tires up to 160PSI and features automatic detection, intelligent presets, and auto-stop functions.

1. Step 1: Prepare for Inflation. Press the power button to turn on the device. Connect the removable air hose to the air hose port on the device and securely screw the other end onto the tire valve.
2. Step 2: Select Mode and Set Pressure. Briefly press the 'M' button to cycle through inflation modes (Car, Motorcycle, Bicycle, Ball, Custom) and pressure units (PSI, BAR, KPA, Kg/cm²). Use the '+' and '-' buttons to adjust the desired pressure.
3. Step 3: Start Inflation. Long press the 'OK' button for 3 seconds to begin inflation. The compressor will automatically stop once the preset pressure value is reached.

Image 5.3: Step-by-step guide for easy tire inflation using the BRPOM G20's air compressor.

Image 5.4: The BRPOM G20 connected to a car tire, actively inflating it to the desired pressure.

5.3 Using the LED Emergency Light

The BRPOM G20 features a 600-lumen LED light with three modes for various situations:

• Гэрэлтүүлгийн горим: Press the light button once for a steady, bright light, ideal for general use in the dark, such as changing tires or inspecting the engine.
• Strobe горим: Press the light button a second time for a flashing strobe light, useful for alerting others or attracting attention in an emergency.
• SOS горим: Press the light button a third time for an SOS signal (3 short, 3 long, 3 short flashes), suitable for emergencies like outdoor adventures or roadside breakdowns.

Image 5.5: The BRPOM G20's LED light offers three distinct modes for various emergency and utility lighting needs.

Image 5.6: The powerful LED light of the BRPOM G20 providing illumination for inspecting a car engine in low-light conditions.

5.4 Power Bank болгон ашиглах

The 26800mAh capacity allows the BRPOM G20 to charge various electronic devices.

• Connect your device's charging cable to one of the USB-C output ports on the BRPOM G20.
• The device will automatically begin charging your connected electronic device.

Image 5.7: The BRPOM G20 functioning as a power bank, providing fast emergency charging for a smartphone.

6. Засвар үйлчилгээ

• Цэвэрлэгээ: Төхөөрөмжийг хуурай, зөөлөн даавуугаар арчина. Хүчтэй химийн бодис эсвэл зүлгүүрийн материал бүү хэрэглээрэй.
• Хадгалах: Store the BRPOM G20 in its robust carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Цэнэглэж байна: For optimal battery life, it is recommended to fully charge the device every 3-6 months, even if not in use.
• Агаарын хоолой: Ensure the air hose and nozzles are clean and free of debris before and after use.

7. Алдаа засах

• Төхөөрөмж асахгүй байна: Ensure the device is charged. If the battery is completely depleted, charge it for at least 30 minutes before attempting to turn it on.
• Jump Start Not Working:
  • Ухаалаг cl байгаа эсэхийг шалгана ууamps are securely connected to both the jump starter and the vehicle battery terminals with correct polarity.
  • cl-ийг баталгаажуулна ууamp indicator light is solid green. If it's red or flashing, check connections.
  • The vehicle battery might be completely dead. Try using the forced start mode (refer to Section 2.3 for warnings).
  • Ensure the jump starter has sufficient charge.
• Air Compressor Not Inflating:
  • Check that the air hose is securely connected to both the device and the tire valve.
  • Ensure the desired pressure is set and the 'OK' button is long-pressed to start inflation.
  • Verify the device has enough battery charge.
• Төхөөрөмжийн хэт халалт: If the device feels excessively hot, stop use immediately and allow it to cool down in a well-ventilated area.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

BRPOM products are designed and manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or contact BRPOM customer support.

9.1 Хэрэглэгчийн дэмжлэг

If you encounter any issues or have questions regarding your BRPOM G20, please contact our customer support team. Contact information can typically be found on the product packaging, the official BRPOM webсайт эсвэл жижиглэн худалдаалагчаар дамжуулан.