HTVRONT утасны гэрний дулаан дарагч машины хэрэглэгчийн гарын авлага

1. Танилцуулга

The HTVRONT Phone Case Heat Press Machine is an advanced auto 3D vacuum heat press designed for sublimation printing on various items, including phone cases, badges, and coasters. It features precise temperature control and a universal mold compatible with popular iPhone models, ensuring high-quality, full-surface transfers with vibrant colors.

This manual provides detailed instructions for the safe and effective use of your HTVRONT heat press machine. Please read it thoroughly before operation.

Image: The HTVRONT Phone Case Heat Press Machine in lavender purple, shown with included accessories such as a phone case fixture, heat-resistant gloves, and sublimation film.

2. Аюулгүй байдлын мэдээлэл

Always observe the following safety precautions to prevent injury or damage to the machine:

• Keep hands and fingers away from the heating plates during operation. The plates reach high temperatures.
• Use heat-resistant gloves when handling hot items or components.
• Машиныг тогтвортой, халуунд тэсвэртэй гадаргуу дээр байрлуулсан эсэхийг шалгаарай.
• Машиныг шатамхай материалын ойролцоо бүү ажиллуул.
• Машиныг ашиглаагүй үед эсвэл цэвэрлэхийн өмнө цахилгааны залгуураас салга.
• Машиныг ус болон бусад шингэнд дүрж болохгүй.
• Хүүхдийн гар хүрэхгүй газар хадгална.
• Only use the machine for its intended purpose as described in this manual.

3. Бүтээгдэхүүний бүрэлдэхүүн хэсгүүд

The HTVRONT Phone Case Heat Press Kit includes the following items:

• HTVRONT H17 Phone Case Heat Press (x1)
• Утасны гэрний бэхэлгээний багц (x1)
• Тэмдгийн бэхэлгээний багц (x1)
• Sublimation Film (A4) (x5)
• Халуунд тэсвэртэй бээлий (1 хос)
• Sublimation Badge (58 mm) (x3)
• Хясаа (x1)
• Heat-resistant Tape (x1)

Image: A visual representation of all components included in the HTVRONT Phone Case Heat Press Kit, neatly arranged with quantities.

4. Тохиргоо

Дулааны хэвлэлийн машинаа тохируулахын тулд дараах алхмуудыг дагана уу.

1. Баглаа задлах: Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана. Ирээдүйд хадгалах, тээвэрлэх зорилгоор сав баглаа боодолтой байх.
2. Байршил: Place the heat press machine on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the machine.
3. Эрчим хүчний холболт: Цахилгааны утсыг газардуулсан цахилгааны залгуурт холбоно уу. Боть байгаа эсэхийг баталгаажуулна ууtage нь машины шаардлагад нийцдэг.
4. Анхны үзлэг: Before first use, inspect the machine for any visible damage. Do not operate if damage is present.

5. Ашиглалтын заавар

5.1 Basic Operation (Quick Start Guide)

The HTVRONT heat press is designed for ease of use, even for beginners. Follow these general steps for heat transfer:

1. Асаах ба тохируулах параметрүүд: Turn on the machine and use the control panel to set the desired temperature and time according to your material's requirements.
2. Preheat and Mount: Place the appropriate fixture (e.g., phone case fixture) into the device. Allow the machine to preheat. Once preheated, mount the item (e.g., phone case) onto the fixture.
3. Apply Sublimation Film: Carefully place the printed sublimation film with your design onto the item. Ensure proper alignment.
4. Begin Transfer: Close the lid to initiate the heat transfer process. The machine will automatically apply 3D vacuum pressure.
5. Completion and Peel: Once the transfer is complete, the machine will signal. Open the lid and carefully peel off the sublimation film while the item is still hot, using heat-resistant gloves.

Image: A visual guide illustrating the four key steps of the 6-minute heat press process, from setting parameters to peeling the film.

5.2 Material-Specific Settings (Quick Reference Chart)

Refer to the table below for recommended temperature and time settings for common sublimation materials:

Table: Quick Reference Chart for recommended heat press settings based on substrate material.

5.3 Universal Mold and Compatibility

The HTVRONT H17 features an adjustable phone case mold designed for compatibility with a wide range of iPhone models (iPhone 12 and above). This single fixture reduces the need for multiple molds.

Image: Illustration showing the heat press's universal adaptation for different iPhone models, highlighting its versatility.

The phone case fixture set includes a main fixture, lens pads, and filler blocks to ensure a snug fit for various phone sizes. Refer to the Model Compatibility Chart for specific recommendations:

Table: Model Compatibility Chart for iPhone models, indicating recommended Lens Pad and Filler Block combinations.

5.4 Smart Alignment Feature

The machine is equipped with phone-specific templates and pattern adjustment tools within its software. This feature ensures perfect alignment and complete coverage of your design, significantly improving the accuracy and efficiency of your creative process.

Image: A screenshot of the Smart Alignment software interface, demonstrating how users can adjust pattern size and position for perfect alignment on phone cases.

6. Засвар үйлчилгээ

Proper maintenance ensures the longevity and optimal performance of your HTVRONT heat press machine:

• Цэвэрлэгээ: After each use, allow the machine to cool completely. Wipe down the heating plates and exterior with a soft, damp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• Бэхэлгээний арчилгаа: Clean the phone case and badge fixtures regularly to prevent residue buildup.
• Хадгалах: Store the machine in a dry, dust-free environment when not in use. Keep it in its original packaging if possible to protect it from damage.
• Шалгалт: Periodically check the power cord for any signs of damage. If damaged, contact customer support for assistance.

7. Алдаа засах

Энэ хэсэгт танд тулгарч болох нийтлэг асуудлуудыг авч үзэх болно. Энд дурдаагүй асуудлуудын талаар хэрэглэгчийн дэмжлэгтэй холбогдоно уу.

• Машин асахгүй байна:
  • Цахилгааны утсыг машин болон ажиллаж байгаа цахилгаан залгуурт найдвартай залгасан эсэхийг шалгаарай.
  • Check if the power switch is in the 'On' position.
  • Өөр төхөөрөмжийг залгах замаар цахилгааны залгуур ажиллаж байгаа эсэхийг шалгана уу.
• Uneven Heat Transfer/Faded Design:
  • Confirm that the temperature and time settings are correct for your specific material (refer to the Quick Reference Chart).
  • Ensure the sublimation film is properly aligned and securely taped to the item.
  • Check that the item is placed correctly and snugly within the fixture.
  • Ensure the item has a sublimation coating, as this machine is only suitable for such items.
• Машин халаахгүй:
  • Verify the temperature setting is not at 0 or minimum.
  • Allow sufficient time for the machine to preheat to the set temperature.
  • Хэрэв асуудал хэвээр байвал хэрэглэгчийн тусламжтай холбогдоно уу.
• Хэт их дуу чимээ:
  • The machine operates quietly, typically below 65 dB. If unusual loud noises occur, discontinue use and contact support.

8. Техникийн үзүүлэлтүүд

• Загварын дугаар: RY-SJKJ-0651-US
• Брэнд: HTVRONT
• Материал: Металл
• Өнгө: Нил ягаан өнгийн лаванда
• Барааны жин: 15.22 фунт (ойролцоогоор 6.9 кг)
• Бүтээгдэхүүний хэмжээ: 1.2"L x 1"W x 0.8"H
• Дуу чимээний түвшин: <65 dB (Quiet Operation)
• Зөвлөмж болгож буй хэрэглээ: Sublimation Phone Cases, Badges, Coasters, Keychains, Slates
• Технологи: Auto 3D Vacuum Heat Press
• Температурын хяналт: Precise digital control
• Тохиромжтой байдал: Universal mold for iPhone 12 and above models

9. Баталгаат хугацаа ба дэмжлэг

HTVRONT is committed to providing excellent customer service. If you have any questions or require assistance with your Phone Case Heat Press Machine, please do not hesitate to contact us.

• Хэрэглэгчийн дэмжлэг: We provide 24/7 customer support to assist with any issues or inquiries.
• Баталгаат мэдээлэл: For detailed warranty terms and conditions, please refer to the warranty card included with your product or contact HTVRONT customer service directly.

Thank you for choosing HTVRONT. We hope you enjoy creating with your new heat press machine!