Elitech PG-30Pro дижитал даралт хэмжигч хэрэглэгчийн гарын авлага

1. Танилцуулга

This manual provides detailed instructions for the proper use and maintenance of the Elitech PG-30Pro Digital Pressure Gauge. This device is designed for accurate pressure measurement in refrigeration and HVAC systems. Please read this manual thoroughly before operation to ensure correct usage and to prevent damage.

Figure 1: Elitech PG-30Pro Digital Pressure Gauge. This image displays the front view of the digital pressure gauge, featuring a blue face with a clear LCD screen, power button, 'SET' button, and 'ZERO' button. The 1/8'' NPT connection is visible at the bottom.

2. Бүтээгдэхүүний онцлог

• Stable and Reliable Sensor: Utilizes a temperature-compensated pressure sensor, ensuring temperature drift does not exceed ±0.04%FS/℃.
• LCD Screen & Blue Backlight Display: Features a partitioned display for various measurements, providing direct readings for all parameters. The blue backlight enhances visibility in low-light conditions.
• Various Refrigerants Options: Includes a built-in PT (Pressure-Temperature) comparison table for 87 common refrigerants, facilitating convenient selection.
• Тэг функц: Allows for zeroing out any deviation at the zero point to correct the system and ensure accurate measurements.
• Overload Warning Indications: Displays 'ALARM' on the screen for overload conditions. If the overload is excessively high, 'ALARM' and the backlight will flash simultaneously.
• Max/Min Value Display and Reset: Records maximum and minimum pressure values, with an option to reset these values.
• Auto Shut-Off Setting: Features an automatic shut-off function to conserve battery power during periods of inactivity.
• Adjustable Temperature and Pressure Units: Supports various temperature units (°C / °F) and pressure units (psi, kg/cm², cmHg, bar, kPa, Mpa, kg/cm²).
• 1/8-inch NPT Fitting: Equipped with a standard 1/8-inch NPT fitting for broad compatibility with various systems.

Зураг 2: Илүүview of Elitech PG-30Pro features. This graphic highlights key functionalities such as backlight display, Max/Min value, zeroing, refrigerant support, auto shut-off, and adjustable units.

Figure 3: Refrigerant compatibility of the Elitech PG-30Pro. This image illustrates the gauge's ability to work with over 90 types of refrigerants, including R12, R22, R134a, R290, R401A, R403A, R740, R744, R601, R143A, R32, R21, and R1234yf.

3. Тохиргоо

3.1 Батерей суурилуулах

1. Төхөөрөмжийн арын хэсэгт зайны тасалгааны тагийг олоорой.
2. Remove the cover by twisting or sliding it according to the markings.
3. Тасалгааны дотор талд заасанчлан зөв туйлшралыг (+/-) хангаж, хоёр (2) AAA батерейг оруулна уу.
4. Зайны тасалгааны тагийг найдвартай солино.

3.2 Анхны холболт

1. Ensure the system to which the gauge will be connected is depressurized or isolated.
2. Carefully thread the 1/8'' NPT fitting of the digital pressure gauge onto the appropriate port of your HVAC or refrigeration system.
3. Tighten the connection firmly by hand, then use a wrench for a final snug turn to prevent leaks. Do not overtighten.

Figure 4: Dimensions and 1/8-inch NPT fitting. This image shows the physical dimensions of the gauge and highlights the 1/8-inch NPT threaded connection for system integration.

4. Ашиглалтын заавар

4.1 Асаах/унтраах

• Төхөөрөмжийг асаахын тулд товчийг дарна уу Хүч button (⏻) located at the top of the gauge.
• Төхөөрөмжийг унтраахын тулд товчлуурыг удаан дарна уу Хүч button (⏻) for approximately 3 seconds until the display turns off.

4.2 Тэг функц

The zero function is used to correct any minor deviations at the zero pressure point before taking a measurement.

• Ensure the gauge is disconnected from any pressure source and is at ambient atmospheric pressure.
• дээр дарна уу ТЭГ button (▶) located at the bottom right of the gauge. The display should show 0.000 psi (or selected pressure unit).

Figure 5: Zeroing function button. This image highlights the 'ZERO' button on the gauge, indicating its use for resetting the pressure reading to zero.

4.3 Changing Units (Pressure/Temperature)

To cycle through available pressure and temperature units:

• дээр дарна уу SET button (◀) to enter the unit selection mode.
• -г ашиглана уу ТЭГ button (▶) to cycle through the available pressure units (psi, kg/cm², cmHg, bar, kPa, Mpa, kg/cm²).
• дээр дарна уу SET button (◀) again to switch to temperature unit selection.
• -г ашиглана уу ТЭГ button (▶) to select between °C and °F.
• дээр дарна уу SET button (◀) to confirm your selection and exit unit setting mode.

Figure 6: Adjustable temperature and pressure units. This graphic illustrates the various units available for both temperature (°C / °F) and pressure (psi, kg/cm², cmHg, bar, kPa, Mpa, kg/cm²).

4.4 Selecting Refrigerants

The gauge has a built-in database of refrigerants for PT comparison.

• While in normal measurement mode, press and hold the SET button (◀) to enter refrigerant selection mode.
• -г ашиглана уу ТЭГ button (▶) to scroll through the list of available refrigerants.
• Once the desired refrigerant is displayed, press the SET button (◀) to confirm your selection and return to measurement mode.

4.5 Унших хэмжилт

Once connected and powered on, the gauge will display the current pressure and corresponding saturation temperature for the selected refrigerant on its LCD screen.

4.6 Max/Min Value Display and Reset

руу view the recorded maximum and minimum pressure values:

• товчийг дарна уу Хүч button (⏻) during operation to cycle through current, maximum, and minimum pressure readings.
• To reset the recorded Max/Min values, press and hold the ТЭГ button (▶) while the Max/Min values are displayed.

Figure 7: Max/Min value display and reset. This image illustrates how the power button is used to cycle through readings and the zero button to reset recorded maximum and minimum values.

4.7 Auto Shut-Off Setting

The gauge features an adjustable auto shut-off time to conserve battery life.

• To adjust the auto shut-off time, press and hold the SET button (◀) until the auto shut-off setting appears.
• -г ашиглана уу ТЭГ button (▶) to cycle through the available time options (e.g., 10 minutes, 20 minutes, Off).
• дээр дарна уу SET button (◀) to confirm your selection.

Figure 8: Auto shut-off setting. This image highlights the 'SET' button, used for configuring the automatic power-off duration to save battery life.

5. Засвар үйлчилгээ

5.1 Цэвэрлэгээ

• Хэмжигчний гадна талыг зөөлөн, d даавуугаар арчинаamp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• Ensure no moisture enters the sensor port or battery compartment.

5.2 Батерейг солих

• Дэлгэц дээр цэнэг багатай үзүүлэлт гарч ирэх үед батерейгаа солино уу.
• 3.1-р хэсэгт дурдсан батерей суурилуулах алхмуудыг дагана уу.
• Ашигласан батерейг орон нутгийн дүрэм журмын дагуу устгана уу.

5.3 Хадгалалт

• Store the gauge in a dry, cool place away from direct sunlight and extreme temperatures.
• Хэрэв удаан хугацаагаар хадгалах юм бол гоожихоос сэргийлж батерейг салга.

6. Алдаа засах

7. Техникийн үзүүлэлтүүд

8. Баталгаат хугацаа ба дэмжлэг

8.1 Баталгаат хугацааны мэдээлэл

The Elitech PG-30Pro Digital Pressure Gauge comes with a 12 сарын баталгаат хугацаа from the date of purchase, covering manufacturing defects and malfunctions under normal use. This warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

8.2 Техникийн дэмжлэг

For technical assistance, troubleshooting, or warranty claims, please contact Elitech customer support. АНУ-ын 24/7 техникийн дэмжлэг is available via email and phone.

• Имэйл: Refer to product packaging or Elitech official webхолбоо барих мэдээллийг авах сайт.
• Утас: Refer to product packaging or Elitech official webхолбоо барих мэдээллийг авах сайт.