Танилцуулга
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sharkoon VK4 Rainbow ATX PC Case. The VK4 Rainbow is designed with a minimalist exterior featuring a perforated front panel and includes four pre-installed 120mm fans with rainbow effect for optimal airflow. It offers ample space for large hardware components and supports radiators up to 360mm, alongside features for clean cable management.

Зураг 1: Өнцөг view of the Sharkoon VK4 Rainbow ATX PC Case, highlighting its perforated front and pre-installed rainbow fans.
Бүтээгдэхүүн дууссанview
The Sharkoon VK4 Rainbow ATX PC Case is engineered for efficient cooling and hardware compatibility. Key features include:
- Superior Cooling: Equipped with four pre-installed 120mm rainbow effect fans for excellent airflow. Additional fan mounting options are available.
- Усны хөргөлтийн дэмжлэг: The front panel supports radiators up to 360mm, and the top panel accommodates radiators up to 280mm.
- Өргөн интерьер: Designed to house large components such as graphics cards up to 35cm, CPU coolers up to 16cm, and power supplies up to 21cm.
- AmpХадгалах сан: Supports up to two 3.5" HDDs or four 2.5" SSDs.
- Тохиромжтой холболт: Top panel features two USB 3.0 ports and a TRRS port for easy access.
- Зохион байгуулалттай интерьер: Generous space for cable management and pre-installed dust filters at all air intake points for cleanliness.
Кейсийн бүрэлдэхүүн хэсгүүд

Зураг 2: Урд view with perforated panel and three 120mm rainbow fans.

Зураг 3: Хажуу тал view showcasing the tempered glass panel.

Зураг 4: Ар талд view with I/O shield area, expansion slots, and exhaust fan.

Figure 5: Top I/O panel with USB 3.0 ports and TRRS audio jack.
Тохиргоо ба суурилуулалт
Follow these steps to install your PC components into the Sharkoon VK4 Rainbow case.
1. Prepare the Case
- Хайрцгийг болгоомжтой задалж, бүх сав баглаа боодлын материалыг ав.
- Remove the tempered glass side panel by unscrewing the thumb screws at the rear and gently pulling it open.
- Remove the opposite metal side panel to access the cable management area.

Figure 6: Internal layout of the VK4 Rainbow case, ready for component installation.
2. Эх хавтанг суурилуулах
- The VK4 Rainbow supports Mini-ITX, Micro-ATX, and ATX motherboards.
- Install the I/O shield into the cutout at the rear of the case.
- Align your motherboard with the pre-installed standoffs and secure it with screws. Ensure all standoffs are used for proper support.
3. Цахилгаан хангамжийн нэгж (PSU) суурилуулах
- Install the PSU into the dedicated compartment at the bottom rear of the case.
- PSU-ийг хайрцагны арын боолтоор бэхлээрэй.
4. Хадгалах диск суурилуулах
- The case supports up to two 3.5" HDDs or four 2.5" SSDs.
- Mount 3.5" HDDs in the drive cage located under the PSU shroud.
- Mount 2.5" SSDs on the dedicated mounting points behind the motherboard tray or on top of the PSU shroud.
5. График карт болон өргөтгөлийн картын суурилуулалт
- Хайрцагны ар талд шаардлагатай тэлэлтийн үүрний тагийг ав.
- Insert your graphics card or other expansion cards into the PCIe slots on your motherboard and secure them with screws.
6. Кабелийн менежмент
Кабелийг цэгцлэхийн тулд эх хавтангийн тавиурын ард байрлах кабелийн чиглүүлэлтийн таслуур болон холбох цэгүүдийг ашиглаарай. Энэ нь агаарын урсгал болон гоо зүйн байдлыг сайжруулна.

Figure 7: Cable management area behind the motherboard tray.
Үйл ажиллагаа
Front Panel Connectivity
The top panel of the VK4 Rainbow case provides convenient access to essential ports:
- 2 USB 3.0 портууд: Тохиромжтой төхөөрөмжүүдтэй өндөр хурдны өгөгдөл дамжуулах зориулалттай.
- 1x TRRS Port: A combined audio jack for headsets with a single 3.5mm plug (microphone and audio).
- Цахилгаан товч: Системээ асаах/унтраах.
- Дахин тохируулах товч: Системээ дахин эхлүүлэхийн тулд.
Сэнсний ажиллагаа
The four pre-installed 120mm rainbow effect fans are connected via Molex connectors. Due to this connection type, the fans operate at a constant speed and their speed cannot be adjusted via the motherboard. This ensures consistent airflow but may result in a noticeable fan noise level.
Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны компьютерын эд ангиудын оновчтой ажиллагаа, урт хугацааны ашиглалтыг хангахад тусална.
Тоосны шүүлтүүр цэвэрлэх
- The VK4 Rainbow features pre-installed dust filters at all air intake points (front, top, and bottom).
- Periodically remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and component cooling.
- Filters can typically be cleaned with compressed air or by rinsing with water and allowing them to dry completely before reinstallation.
Ерөнхий цэвэрлэгээ
- Use a soft, dry cloth to wipe down the exterior surfaces of the case.
- Шилэн хавтангийн хувьд толбо үүсэхээс сэргийлж шил цэвэрлэгч болон микрофибр даавуу хэрэглээрэй.
- Ensure the system is powered off and unplugged before performing any cleaning inside the case.
Алдааг олж засварлах
Энэ хэсэгт танд тулгарч болох нийтлэг асуудлуудыг авч үзэх болно.
- High Fan Noise: The pre-installed fans are connected via Molex and operate at a constant speed. If fan noise is a concern, consider replacing the fans with PWM-controlled alternatives that can be regulated by your motherboard.
- Агаарын урсгал муу/хэт халалт:
- Check if dust filters are clean and not obstructed.
- Ensure all case fans are spinning correctly.
- Verify that cables are neatly managed and not blocking airflow paths.
- Кабелийн менежментийн хүндрэл: While the case offers space, complex builds with many components may require careful planning. Utilize cable ties and routing channels effectively.
- Урд самбарын портууд ажиллахгүй байна:
- Ensure the front panel connectors (USB 3.0, audio, power, reset) are correctly plugged into the motherboard headers.
- Check your motherboard manual for correct header pinouts.
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | Шаркун |
| Загварын нэр | VK4 Солонго |
| Загварын дугаар | SHA-VK4-RAINBOW BK |
| Кейсийн төрөл | ATX цамхаг |
| Эх хавтангийн нийцтэй байдал | Mini-ITX, Micro-ATX, ATX |
| Өнгө | Хар |
| Материал | Металл |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 40.4 x 20.6 x 48.7 см |
| Зүйлийн жин | 7.12 кг |
| Урьдчилан суулгасан фенүүд | 4x 120mm Rainbow Effect Fans |
| Макс. График картын урт | 35 см |
| Макс. CPU хөргөгчийн өндөр | 16 см |
| Макс. PSU урт | 21 см |
| Радиаторын тулгуур (урд) | 360 мм хүртэл |
| Радиаторын дэмжлэг (дээд) | 280 мм хүртэл |
| Drive Bays | 2x 3.5" HDD or 4x 2.5" SSD |
| Урд талын I/O | 2x USB 3.0, 1x TRRS Audio |
Баталгаат болон дэмжлэг
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon website. If you require technical assistance or have questions not covered in this manual, please contact Sharkoon customer support through their official channels.
Үйлдвэрлэгч: Sharkoon Technologies GmbH
Webсайт: www.sharkoon.com





