AVATTO Smart Fingerprint Door Lock Cylinder 60mm (30/30) User Manual

1. Танилцуулга

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your AVATTO Smart Fingerprint Door Lock Cylinder (Model SDL-S1-B60). Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Аюулгүй байдлын мэдээлэл

• Суулгахаасаа өмнө бүх эд ангиуд байгаа бөгөөд гэмтээгүй эсэхийг шалгаарай.
• Do not attempt to disassemble or modify the lock cylinder, as this may void the warranty and compromise security.
• Use only the specified 1.5V alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Keep mechanical keys in a safe place outside the property.
• Protect the fingerprint sensor from sharp objects or excessive force.
• This lock is designed for indoor use. Avoid exposure to extreme weather conditions.

3. Багцын агуулга

Дараах бүх зүйлс таны багцад байгаа эсэхийг шалгаарай.

• 1 x AVATTO Smart Door Lock Cylinder (60mm)
• 2 х механик түлхүүр
• 3 х RFID карт
• 1 х халив
• 1 x User Manual (German, refer to this document for English instructions)

4. Суурилуулалт

4.1 Суурилуулалтын өмнөх шалгалт

Before proceeding with installation, ensure your door and existing lock cylinder are compatible:

• Цилиндрийн төрөл: Confirm your existing cylinder type is compatible. This smart lock is designed to replace standard European profile цилиндр.
• Cylinder Hole Size: Measure the dimensions of your door's lock cylinder hole. The required dimensions are approximately 20mm diameter, 35mm height, and 10mm width.
• Хаалганы зузаан: This lock is suitable for doors with a thickness between 60mm and 85mm.

4.2 Cylinder Dimensions

The smart lock cylinder has the following dimensions:

4.3 Суурилуулалтын үе шатууд

1. Одоо байгаа цилиндрийг зайлуулах: Unscrew the retaining screw on the side of your door that holds the current lock cylinder in place. Insert your key and turn it slightly (about 15-20 degrees) to align the cam, then pull the cylinder out.
2. Adjust Inner Cylinder Length: The inner cylinder length is adjustable from 30mm to 55mm. Adjust it to match the inner side of your door. The outer cylinder length is fixed at 30mm.
3. Insert Smart Lock Cylinder: Insert the AVATTO Smart Lock Cylinder into the door's cylinder hole. Ensure it fits snugly and the outer fingerprint module is correctly oriented.
4. Цилиндрийг бэхлэх: Re-insert and tighten the retaining screw on the side of the door to secure the smart lock cylinder.
5. Батерейг суулгах: Open the battery compartment on the inner side of the lock. Insert 3 x 1.5V alkaline batteries (CR123A type recommended, not included). Ensure correct polarity.
6. Туршилтын функц: Before closing the door, test the mechanical key and the inner knob to ensure smooth operation.

Installation typically takes about 10 minutes using a hex screwdriver (provided).

5. Тохиргоо

5.1 Smart Life App Connection

1. Апп татаж авах: Download the "Smart Life" application from your smartphone's app store (iOS or Android).
2. Бүртгүүлэх/Нэвтрэх: Бүртгэл үүсгэх эсвэл одоо байгаа Smart Life бүртгэлдээ нэвтэрнэ үү.
3. Төхөөрөмж нэмэх: In the app, tap '+' to add a new device. Select 'Security & Video Surveillance' > 'Smart Lock' or search for 'AVATTO Smart Lock'.
4. Bluetooth-ээр хослуулах: Ensure your phone's Bluetooth is enabled. The app will guide you through the pairing process. The lock uses Bluetooth protocol with an effective transmission range of 50 meters.
5. Алсын удирдлага (заавал биш): For remote control functionality outside the Bluetooth range (e.g., from office or on the go), an AVATTO Bluetooth Gateway (sold separately) is required. Connect the gateway to your home Wi-Fi and link it to the lock via the Smart Life app.

5.2 Хэрэглэгч нэмэх, түгжээг тайлах аргууд

Through the Smart Life app, you can manage various unlocking methods:

• Хурууны хээний бүртгэл: Follow the in-app instructions to register fingerprints. You will typically need to place your finger on the sensor multiple times from different angles.
• RFID картын бүртгэл: In the app, select to add an RFID card, then present the RFID card to the lock's sensor as instructed.
• Хэрэглэгчийн удирдлага: Add new users, assign specific unlocking methods (fingerprint, RFID, app), and set administration permissions.

6. Ашиглалтын заавар

6.1 Түгжээг тайлах

• Хурууны хээ тайлах: Бүртгүүлсэн хуруугаа хурууны хээ мэдрэгч дээр байрлуулна уу. Хэрэв хурууны хээ танигдвал түгжээ нээгдэнэ.
• RFID картны түгжээг тайлах: Present a registered RFID card to the lock's sensor. The lock will unlock upon recognition.
• Smart Life App Unlock: Open the Smart Life app, select your lock, and tap the unlock button. This works via Bluetooth or remotely if a gateway is connected.
• Механик түлхүүр тайлах: Insert one of the provided mechanical keys into the keyhole and turn to unlock the door.

6.2 Түгжих

• Автомат түгжих: The lock may be configured for automatic locking after a set period.
• Гараар түгжих: From the inside, turn the knob to lock the door. From the outside, the lock will automatically engage after closing, or you can manually lock it via the app.

7. Засвар үйлчилгээ

7.1 Батерейны удирдлага

The lock requires 3 x 1.5V alkaline batteries. Batteries are not included.

• Зайны төлөв: You can check the battery level through the Smart Life app interface.
• Батерей багатай анхааруулга: The lock will provide an indication (e.g., sound or light) when batteries are low. Replace them promptly.
• Зай солих: When replacing batteries, ensure the lock is in an unlocked state if possible. Open the battery compartment, remove old batteries, and insert new ones with correct polarity.

7.2 Emergency Unlock

In case of completely drained batteries, you can still access your property:

• Механик түлхүүр: Use one of the provided mechanical keys to unlock the door.
• Гадаад хүч: The lock features a USB port for emergency power. Connect a portable power bank to the USB port to temporarily power the lock and unlock it using a registered fingerprint, RFID card, or the app.

8. Алдаа засах

• Түгжээ хариу өгөхгүй байна: Check battery level. Replace batteries if low. Ensure the lock is properly installed and not obstructed.
• Хурууны хээ танигдаагүй: Хуруугаа цэвэр, хуурай байгаа эсэхийг шалгаарай. Аппликейшнд хурууны хээгээ дахин бүртгүүлж үзнэ үү.
• RFID card not working: Ensure the card is registered. Try re-registering the card.
• Апп холболтын асуудал: Ensure Bluetooth is enabled on your phone. If using remote control, check the AVATTO Bluetooth Gateway's connection to Wi-Fi and the lock. Restart the app or your phone.
• Motor sounds but latch doesn't move: This could indicate an obstruction or incorrect installation. Recheck the cylinder's alignment and ensure no parts are binding.
• Lock is unresponsive after battery change: Ensure batteries are inserted with correct polarity. If issues persist, contact support.

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the documentation provided with your purchase or contact AVATTO customer service through their official website or the retailer where the product was purchased. Please have your model number (SDL-S1-B60) and purchase details ready when contacting support.