JDIAG HD10 Heavy Duty Truck and Car Diagnostic Scan Tool User Manual

1. Танилцуулга

The JDIAG HD10 is a versatile diagnostic scan tool designed for comprehensive analysis of both 12V gasoline/diesel vehicles and 24V diesel heavy-duty trucks. This device supports a wide range of diagnostic functions, including reading and clearing Diagnostic Trouble Codes (DTCs), displaying live data, and performing various system checks. Its ergonomic design and user-friendly interface aim to provide efficient vehicle diagnostics.

Figure 1: JDIAG HD10 Diagnostic Scan Tool with included 6-pin and 9-pin adapters.

2. Аюулгүй байдлын мэдээлэл

Always observe the following safety precautions when operating the JDIAG HD10 diagnostic tool:

• Тээврийн хэрэгслийг аюулгүй, агааржуулалт сайтай газар байрлуулсан эсэхийг шалгаарай.
• Нүдний хамгаалалт гэх мэт зохих хувийн хамгаалах хэрэгслийг өмс.
• Avoid contact with hot engine components or moving parts.
• Do not operate the tool while driving.
• Keep the tool dry and away from extreme temperatures.
• Refer to the vehicle's service manual for specific diagnostic procedures and warnings.

3. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• HD10 heavy duty scanner tool
• 6-pin adapter (for trucks)
• 9-pin adapter (for trucks)
• USB өгөгдлийн кабель
• Хэрэглэгчийн гарын авлага

4. Төхөөрөмж дууссанview

The JDIAG HD10 features a 2.4-inch color screen and intuitive button layout for easy navigation. Its robust design includes non-slip grips and a durable integrated cable.

Figure 2: Ergonomic design features including silicone buttons, non-slip sides, durable cable, and OBD2 connector.

Figure 3: Main menu interface of the HD10 device.

4.1. Физик шинж чанарууд

• Дэлгэц: 2.4 инчийн TFT өнгөт дэлгэц (320 x 240 нягтралтай).
• Товчлуур: Clearly arranged silicone physical buttons for high sensitivity and fast response.
• Орон сууц: Anti-slip design on both sides for secure handling.
• Кабель: Integrated, thick, and durable wire (up to 105 cm).
• Холбогч: Standard OBD2 connector, with included 6-pin and 9-pin adapters for heavy-duty vehicles.

5. Тохиргоо

5.1. Тээврийн хэрэгсэлд холбогдох

1. Locate the vehicle's Diagnostic Link Connector (DLC). For 12V vehicles, this is typically a 16-pin OBD2 port. For heavy-duty 24V vehicles, it will be a 6-pin or 9-pin connector.
2. If diagnosing a heavy-duty vehicle, attach the appropriate 6-pin or 9-pin adapter to the HD10's main cable, then connect to the vehicle's DLC. For 12V vehicles, connect the standard OBD2 connector directly.
3. Ensure the connection is secure. The device will power on automatically once connected to the vehicle's power supply.

Figure 4: The HD10 displaying live data, illustrating its 2.4-inch color screen.

5.2. Анхны тохиргоо

Анх удаа ашиглах эсвэл дахин тохируулсны дараа та үндсэн тохиргоог тохируулах шаардлагатай болж магадгүй:

• руу шилжих Тохиргоо menu using the directional buttons and press OK.
• Сонго Хэл өөрийн хүссэн хэлээ сонгох.
• Other settings like unit of measurement (e.g., Metric/Imperial) may also be available in the Setup menu.

6. Ашиглалтын заавар

The JDIAG HD10 offers various diagnostic functions accessible through its main menu.

6.1. Үндсэн цэсийн навигаци

Чиглүүлэгч товчлууруудыг ашиглана уу (Up, Доош, Зүүн, Зөв) to highlight menu options and press the OK сонголтыг баталгаажуулахын тулд товчлуурыг дарна уу. Буцах button (curved arrow) navigates back to the previous screen.

6.2. HD OBD (Heavy Duty On-Board Diagnostics)

This mode is for diagnosing heavy-duty trucks and supports protocols like SAE J1939, SAE J1587/J1708, ISO15765, ISO 14230, and ISO 9141-2.

Figure 5: Full system diagnostic capabilities for heavy-duty vehicles.

• Код унших: Retrieves Diagnostic Trouble Codes (DTCs) from various vehicle systems (Engine, Transmission, Drivetrain, Suspension, Braking System, Cab Climate, Body Control, Dashboard, Fuel System, etc.).
• Кодуудыг устгах: Clears DTCs from the vehicle's computer after repairs have been made.
• Шууд өгөгдөл: Displays real-time operational parameters of the vehicle's systems.
• Full System Diagnosis: Accesses and diagnoses all supported electronic control units (ECUs) in 24V diesel vehicles.

6.3. OBDII (Standard On-Board Diagnostics)

This mode is for diagnosing 12V gasoline/diesel vehicles and supports standard OBD2 protocols including SAE J1850.

Зураг 6: Илүүview of full OBD2 functions available.

• Код унших: Retrieves current, pending, and permanent DTCs.
• Кодуудыг устгах: DTC-г арилгаж, алдааны индикатор L-г унтраанаamp (MIL).
• I/M бэлэн байдал: Ялгаралттай холбоотой мониторуудын бэлэн байдлыг шалгана.
• Өгөгдлийн урсгал: Displays live sensor data in text or graph format.
• Хүрээг царцаах: Records a snapshot of vehicle conditions when an emission-related fault occurs.
• O2 мэдрэгчийн туршилт: О2 мэдрэгчийн хяналтын туршилтын үр дүнг авна.
• On-Board Monitoring: Retrieves results for on-board diagnostic monitoring tests of specific components/systems.
• EVAP системийн туршилт: Initiates a test of the Evaporative Emission Control System.
• Тээврийн хэрэгслийн мэдээлэл: Displays the vehicle's Vehicle Identification Number (VIN), Calibration ID (CALID), and Calibration Verification Number (CVN).

6.4. DTC хайлт

The built-in DTC Lookup function allows you to search for definitions of diagnostic trouble codes directly on the device, helping to understand the nature of a fault without external resources.

6.5. CAN Node Detection

This function helps quickly detect CANBUS nodes and identify faulty modules or lines by checking existing nodes, improving diagnostic efficiency.

6.6. BAT Test (Battery Test)

The BAT Test function allows for basic battery voltage checks, providing quick insights into the vehicle's battery health.

6.7. Програм хангамжийн шинэчлэлт

The JDIAG HD10 supports lifetime free software updates. Connect the device to a computer via the USB data cable and follow the instructions on the manufacturer's website to download and install the latest software. This ensures expanded fault coverage and up-to-date functionality.

7. Засвар үйлчилгээ

7.1. Цэвэрлэгээ

Төхөөрөмжийг зөөлөн арчиж, damp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла. Хадгалах эсвэл дараагийн хэрэглээний өмнө төхөөрөмжийг хуурай байлгах хэрэгтэй.

7.2. Хадгалах

Store the JDIAG HD10 in a clean, dry environment, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use to prevent damage.

8. Алдаа засах

9. Техникийн үзүүлэлтүүд

• Брэнд: JDIAG
• Загвар: HD10 (Item model number) / CC0147HD10 (Manufacturer Model)
• Үйлдлийн систем: Линукс
• Автомашины тохирох төрөл: Universal Fit
• Supported Protocols (Heavy Duty): SAE J1939, SAE J1587/J1708, ISO15765, ISO 14230, ISO 9141-2
• Supported Protocols (OBD2): SAE J1850 (VPW/PWM), ISO9141, ISO14230 (KWP), ISO15765-4 (CAN)
• Дэлгэц: 2.4 инчийн TFT өнгөт дэлгэц
• Барааны жин: 1.15 фунт
• Багцын хэмжээ: 7.48 x 6.69 x 1.57 инч

Figure 7: Compatibility table for various heavy-duty truck brands and protocols.

10. Баталгаат хугацааны мэдээлэл

For detailed warranty information regarding your JDIAG HD10 diagnostic tool, please refer to the documentation included with your purchase or contact JDIAG customer support directly. Protection plans may be available for extended coverage.

11. Дэмжлэг

If you encounter any issues or have questions regarding the operation of your JDIAG HD10, please contact the JDIAG technical support team. They are available to provide assistance and operational guidance.

• Үйлдвэрлэгч: JDIAG
• Техникийн дэмжлэг: Refer to the contact information provided in your product packaging or on the official JDIAG webсайт.