Танилцуулга
Thank you for choosing the suptek Single Monitor Wall Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.
This wall mount is designed to securely hold a single monitor, freeing up desk space and allowing for ergonomic adjustments to enhance your viewтав тух, бүтээмж.
Аюулгүй байдлын мэдээлэл
АНХААРУУЛГА: Improper installation may result in property damage or personal injury. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.
- 19.8 фунт (9 кг) ачааны дээд хэмжээнээс хэтрүүлж болохгүй.
- Ensure the mounting surface (wall) can safely support the combined weight of the mount and the monitor.
- Always use a stud finder to locate wood studs for secure mounting. For concrete or brick walls, use appropriate anchors (included). Do not mount into drywall alone.
- Хүүхдүүдийг хөдөлгөөнтэй хэсгүүдээс хол байлга.
- Check all connections regularly to ensure they remain secure.
- Энэ бүтээгдэхүүн нь зөвхөн дотор ашиглах зориулалттай.
Багцын агуулга
Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact customer support.
- Гарын угсралтыг хянах
- Ханын хавтан
- VESA хавтан
- Hardware Kit (screws, washers, spacers, wall anchors)
- Hex түлхүүрүүд
- Зааварчилгааны гарын авлага
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | suptek |
| Загвар | B0FHVH6PLY |
| Тохиромжтой дэлгэцийн хэмжээ | 17-32 инч |
| Жингийн багтаамж | 4.4 - 19.8 фунт (2 - 9 кг) |
| VESA нийцтэй байдал | 75х75мм, 100х100мм |
| Налалтын өнцөг | ±80° |
| Эргэдэг өнцөг | ±90° |
| Эргүүлэх | 360° |
| Хамгийн их өргөтгөл | 20.47 инч (52 см) |
| Өндөр тохируулах хүрээ | 12.59 инч (32 см) |
| Материал | Хайлш ган |
| Өнгө | Цагаан |
Image: Compatibility details including VESA 75x75mm and 100x100mm, max load 19.8 lbs, monitor size 13-32 inches, and compatible wall types (Wood Stud, Concrete Wall, Brick Wall).
Тохиргоо ба суурилуулалт
Follow these steps carefully to install your monitor wall mount.
Step 1: Choose Mounting Location and Wall Type
Select a location on your wall that is structurally sound and can support the weight of the mount and your monitor. Use a stud finder to locate a wood stud for optimal security. For concrete or brick walls, ensure you use the appropriate wall anchors provided.
Image: Wall mount installation compatibility with Wood Stud (requires specific method), Concrete Wall, and Brick Wall.
Алхам 2: VESA хавтанг монитор дээр хавсаргана уу
- Carefully place your monitor face down on a soft, clean surface to prevent scratches.
- Identify the VESA mounting holes on the back of your monitor (75x75mm or 100x100mm).
- Select the correct screws (M4 or M5) and washers from the hardware kit that fit your monitor's VESA holes. If the screws are too long, use the provided spacers.
- Attach the VESA plate to the back of your monitor using the selected screws and washers. Do not overtighten.
Алхам 3: Ханын хавтанг хананд бэхлэх
- Hold the wall plate against the wall at your desired mounting height. Use a level to ensure it is straight.
- Mark the drilling locations through the holes on the wall plate.
- Модон тулгуурын хувьд: Drill pilot holes (recommended size in manual) into the center of the stud. Secure the wall plate using the lag bolts provided.
- Бетон/Тоосгон хананы хувьд: Drill pilot holes (recommended size in manual) and insert the plastic wall anchors. Then secure the wall plate using the lag bolts.
- Ханын хавтанг хананд бат бөх, найдвартай бэхэлсэн эсэхийг шалгаарай.
Step 4: Attach Monitor Arm to Wall Plate
Slide the monitor arm assembly onto the wall plate. Ensure it clicks securely into place. There may be a locking screw or mechanism to further secure it; refer to the detailed diagram in the included printed manual.
Step 5: Attach Monitor to Arm
Carefully slide the monitor (with the attached VESA plate) onto the VESA head of the monitor arm. Secure it with the locking screw or mechanism, typically located on the top or side of the VESA head.
Image: Fully installed suptek Single Monitor Wall Mount with a monitor attached.
Ашиглалтын заавар
Хийн хаврын хурцадмал байдлыг тохируулах
The gas spring mechanism allows for smooth height adjustment. The tension needs to be adjusted to match your monitor's weight for optimal performance. Use the provided hex key to adjust the tension screw located on the arm.
- Turn Clockwise (+): For lighter monitors, to increase tension and prevent the monitor from dropping.
- Turn Counter-Clockwise (-): For heavier monitors, to decrease tension and allow the monitor to move down easily.
Adjust until the monitor stays at any desired height when released.
Image: Gas spring tension adjustment points and directions for lighter/heavier monitors.
Full Motion Adjustments
The monitor arm offers a wide range of motion for ergonomic positioning:
- Хазайлт: Adjust the monitor screen ±80° up or down to reduce glare and optimize viewөнцөг.
- Эргэдэг: Rotate the monitor ±90° left or right to share your screen or change viewчиглэл.
- Эргүүлэх: Rotate the monitor 360° from landscape to portrait orientation.
- Өргөтгөх/Татах: The arm extends up to 20.47 inches (52 cm) and retracts to save space.
- Өндөр тохируулга: The gas spring allows for smooth vertical movement within a 12.59-inch (32 cm) range.
Image: Full motion capabilities including tilt, swivel, and 360° rotation.
Image: Arm extension and retraction, showing a maximum extension of 20.47 inches.
Image: Height adjustment range of 12.59 inches for eye-level comfort.
Кабелийн менежмент
The monitor arm features integrated cable management clips or channels to keep your cables organized and out of sight. Route your monitor's power and video cables through these channels for a clean and tidy workspace.
Засвар үйлчилгээ
- Бүх шураг, холболтыг нягт, найдвартай эсэхийг шалгахын тулд үе үе шалгаж байгаарай.
- Суурилуулалтыг зөөлөн, d-ээр цэвэрлээрэйamp даавуу. Зүлгүүрийн цэвэрлэгч эсвэл уусгагчаас зайлсхий.
- Do not attempt to disassemble the gas spring mechanism.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Monitor sags or drops | Хийн пүршний хурцадмал байдал нь дэлгэцийн жинд хэт бага байна. | Тохируулгын боолтыг цагийн зүүний дагуу эргүүлж хийн пүршний хурцадмал байдлыг нэмэгдүүлнэ. |
| Monitor is difficult to push down or stays too high | Хийн пүршний таталт нь дэлгэцийн жинд хэт өндөр байна. | Тохируулгын боолтыг цагийн зүүний эсрэг эргүүлж хийн пүршний хурцадмал байдлыг бууруулна. |
| Уул нь тогтворгүй мэт санагдаж байна | Wall plate not securely fastened; screws loose. | Re-check all mounting screws on the wall plate and tighten them. Ensure proper wall type and anchors were used. |
| Monitor does not fit VESA plate | Буруу VESA хээ эсвэл шурагны хэмжээ. | Verify your monitor's VESA pattern (75x75mm or 100x100mm). Ensure you are using the correct M4 or M5 screws and spacers. |
Баталгаат болон дэмжлэг
For warranty information or technical support, please refer to the warranty card included with your product or visit the official suptek website. If you have any questions or require assistance, do not hesitate to contact suptek customer service.
Холбоо барих мэдээлэл: Please refer to the packaging or suptek's official webхамгийн сүүлийн үеийн холбоо барих мэдээллийг авах сайт.