1. Аюулгүй байдлын мэдээлэл
For safe operation of the AGT-MX15-(B) Small Excavator, please adhere to all safety guidelines. This equipment is intended for specific uses and requires careful handling.
- Always wear appropriate personal protective equipment (PPE), including hard hat, safety glasses, gloves, and steel-toed boots.
- Ensure the operating area is clear of personnel, obstacles, and overhead hazards before starting.
- Never operate the excavator under the influence of alcohol or drugs.
- Perform a pre-operation inspection to check for any damage, leaks, or loose components.
- Understand and follow all local safety regulations and site-specific rules.
- Do not exceed the maximum digging depth or lifting capacity.
- Secure the machine properly when transporting.
2. Бүтээгдэхүүн дууссанview
The AGT-MX15-(B) is a compact and powerful 1-ton mini excavator designed for various digging and earthmoving tasks. It features a 13.5HP engine and includes a non-hydraulic thumb for enhanced material handling capabilities.
Үндсэн шинж чанарууд ба техникийн үзүүлэлтүүд:
- Загвар: AGT-MX15-(B)
- Ашиглалтын жин: 0.9 Ton (approximately 2205 lbs)
- Net Horsepower (HP): 13.5 морины хүчтэй
- Шилжилт: 420сс
- Max Digging Depth: 1,769 мм (70 инч)
- Max Digging Height: 2,583 мм (102 инч)
- Нийт өндөр: 2,210 мм (91 инч)
- Нийт өргөн: 936 мм (43 инч)
- Blade Max Drop Depth: 146 мм (6 инч)
- Замын өргөн: 180*72*37 (Width*Pitch Length*Links)
- Thumb: Non-hydraulic thumb included
- Загварын жил: 2024
Зураг 2.1: Хажуу тал view of the AGT-MX15-(B) Small Excavator, showing the main body, tracks, and boom assembly.
Figure 2.2: The AGT-MX15-(B) Small Excavator with its boom extended and the non-hydraulic thumb attachment visible on the bucket.
3. Тохиргоо ба угсралт
The AGT-MX15-(B) excavator typically arrives partially assembled. Follow these general steps for final setup:
- Савлах: Carefully remove the excavator from its packaging. Inspect for any shipping damage.
- Шингэний шалгалт: Verify engine oil, hydraulic fluid, and fuel levels. Top up if necessary using recommended fluids.
- Зайны холболт: Connect the battery terminals, ensuring correct polarity.
- Хяналттай танилцах: Locate and understand the function of all control levers, pedals, and switches. Refer to the control diagram (if provided separately).
- Хавсралт суурилуулах: If any attachments (e.g., bucket, thumb) are not pre-installed, follow the specific instructions for secure mounting. Ensure all pins and safety clips are in place.
- Safety Guard Installation: Install any removable safety guards or covers as instructed.
A tool box is included with the product for basic maintenance and assembly needs.
4. Ашиглалтын заавар
Before operating, ensure you have read and understood the safety information. Always operate the excavator from the operator's seat.
4.1 Хөдөлгүүрийг асаах
- Ensure the parking brake is engaged and all controls are in the neutral position.
- Гал асаах түлхүүрийг 'ON' байрлалд эргүүлнэ үү.
- If equipped, engage the choke for cold starts.
- Turn the ignition key to the 'START' position and release once the engine starts. Do not crank for more than 5 seconds.
- Allow the engine to warm up for a few minutes before beginning operation.
4.2 Үндсэн үйл ажиллагаа
- Машин жолоодох: Use the track control levers/pedals to move the excavator forward, backward, and to turn.
- Boom and Arm: Use the joystick controls to raise/lower the boom and extend/retract the arm.
- Сав: Use the joystick controls to curl in or dump the bucket.
- Савлуур: Use the swing control to rotate the upper structure of the excavator.
- Ир: Use the blade control lever to raise or lower the dozer blade.
- Thumb: The non-hydraulic thumb is manually adjustable or fixed, used in conjunction with the bucket for gripping materials.
4.3 Унтраах
- Экскаваторыг тэгш газар байрлуулна.
- Lower all attachments to the ground.
- Зогсоолын тоормосыг асаана уу.
- Хөргөхийн тулд хөдөлгүүрийг хэдэн минутын турш сул байлгана.
- Гал асаах түлхүүрийг 'OFF' байрлалд эргүүлнэ үү.
- Зөвшөөрөлгүй ашиглахаас сэргийлэхийн тулд түлхүүрийг ав.
5. Засвар үйлчилгээ
Regular maintenance is crucial for the longevity and safe operation of your AGT-MX15-(B) excavator.
- Өдөр тутмын шалгалт: Inspect fluid levels (engine oil, hydraulic fluid, coolant), check for leaks, inspect tracks for damage, and ensure all safety devices are functional.
- Хөдөлгүүрийн засвар үйлчилгээ: Follow the engine manufacturer's recommendations for oil changes, air filter cleaning/replacement, and spark plug inspection.
- Гидравлик систем: Check hydraulic fluid level regularly. Replace hydraulic filters as per schedule.
- Греasing: Lubricate all grease points on the boom, arm, bucket, and swing bearing daily or before each use.
- Замын хурцадмал байдал: Periodically check and adjust track tension to prevent premature wear.
- Цэвэрлэгээ: Keep the excavator clean, especially around the engine and hydraulic components, to prevent overheating and contamination.
- Хадгалах: When storing for extended periods, ensure the excavator is clean, all fluids are at correct levels, and the battery is disconnected or maintained.
6. Алдаа засах
Энэ хэсэгт үйл ажиллагааны нийтлэг асуудлуудын шийдлүүдийг өгсөн болно. Нарийн төвөгтэй асуудлын хувьд мэргэшсэн үйлчилгээний ажилтнуудтай холбогдоно уу.
- Хөдөлгүүр эхлэхэд алдаа гарлаа:
- Түлшний түвшинг шалгана уу.
- Ensure battery connections are secure and the battery is charged.
- Гал асаах унтраалга ажиллаж байгаа эсэхийг шалгана уу.
- Check spark plug for fouling or damage.
- Гидравлик хүчний алдагдал:
- Гидравлик шингэний түвшинг шалгана уу.
- Inspect for hydraulic leaks.
- Ensure hydraulic filters are not clogged.
- Хөдөлгүүрийн хэт халалт:
- Хөргөлтийн түвшинг шалгана уу.
- Clean radiator fins and engine cooling areas.
- Зөв агааржуулалтыг хангах.
- Ер бусын дуу чимээ:
- Identify the source of the noise.
- Check for loose components, worn bearings, or insufficient lubrication.
7. Нарийвчилсан техникийн үзүүлэлтүүд
| Тодорхойлолт | Үнэ цэнэ |
|---|---|
| Бүтээгдэхүүний хэмжээс | 90.55 x 39.37 x 82.68 инч |
| Зүйлийн жин | 2205 фунт |
| ASIN | B0FJCKVS5D |
| Үйлдвэрлэгчээс санал болгосон нас | 3 years and up (Note: This is likely a classification for toy versions, actual operation requires adult supervision and training) |
| Үйлдвэрлэгч | AGT INDUSTRIAL |
8. Баталгаат хугацаа ба дэмжлэг
For information regarding warranty coverage, technical support, or to order replacement parts, please contact AGT INDUSTRIAL customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Always provide your model number (AGT-MX15-(B)) and serial number when contacting support to ensure efficient service.
