1. Танилцуулга
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.
Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).
2. Тохиргоо
Follow these steps to set up your RGBlink NDI PTZ Camera Controller.
2.1 Сав баглаа боодол, анхны үзлэг
- Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
- Баглаа боодлын жагсаалтад орсон бүх зүйл байгаа эсэхийг шалгаарай.
- Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.
2.2 Хянагчийг холбох
The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.
- Ethernet дээрх хүч (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
- Гадаад тэжээлийн адаптер: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
- Камерын холболтууд:
- Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
- Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.
Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.
Зураг 2.2: Жишээ ньample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.
Image 2.3: Diagram illustrating IP camera connections via a network switch.
2.3 Сүлжээний тохиргоо
For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.
- Access the controller's web a-д IP хаягаа оруулснаар интерфейс web browser. (Refer to the device's display or network tools to find the IP address).
- The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
- дотор web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.
Image 2.4: NDI|HX camera search and control interface on the controller.
3. Үйл ажиллагаа
This section details the operational functions of the RGBlink NDI PTZ Camera Controller.
3.1 гаруйview Хяналтын
The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.
Image 3.1: The controller's 3.49-inch LCD display.
Зураг 3.2: Нарийвчилсан view of the 3D joystick and multi-function knobs.
Image 3.3: Layout of the controller's buttons and numeric keypad area.
3.2 Камерын сонголт
- Түргэн сонголтын товчлуурууд: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
- Тоон товчлуур: For cameras beyond the quick select buttons (up to 255), press the CAM ID button, then enter the camera number using the numeric keypad, and press ENTER.
Image 3.4: The controller's ability to manage multiple cameras.
3.3 PTZ удирдлага
- Жойстик: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
- PT хурдны бариул: Adjusts the gimbal movement speed for pan and tilt.
- Zoom Knob: Provides precise zoom control, especially useful in preview горим.
3.4 Image Parameter Adjustment
- IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
- R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
- FOCUS Button: дээр дарна уу АВТО ФОКУС button to switch the camera to auto focus mode.
- EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
- BACKLIGHT Button: Toggles the camera's backlight mode.
- WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
- ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.
Image 3.5: Functions of buttons and knobs on the left side of the controller.
Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.
3.5 Урьдчилан тохируулах
- SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press ENTER хадгалах. дарна уу ESC гарах.
- CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press ENTER to recall. Press ESC гарах.
- The controller supports saving and recalling up to 255 presets per camera.
3.6 Цэсийн навигаци
- MENU товч: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), ENTER confirms selections, and ESC acts as a back button.
4. Засвар үйлчилгээ
Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.
4.1 Цэвэрлэгээ
- Use a soft, dry cloth to clean the exterior of the controller.
- Зөрүүд шороонд бага зэрэг dampдаавууг ус эсвэл зөөлөн, зүлгүүргүй цэвэрлэх уусмалаар хийнэ.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
- Ensure no liquids enter the device through openings or ports.
4.2 Хадгалалт
- When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Төхөөрөмжийг тоос, чийгээс хамгаална.
5. Алдаа засах
Энэ хэсэг нь танд тулгарч болох нийтлэг асуудлуудын шийдлүүдийг өгдөг.
5.1 Эрчим хүчгүй
- Эрчим хүчний эх үүсвэрийг шалгах: Ensure the power adapter is securely connected to both the controller and a working power outlet.
- PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
- Кабелийн бүрэн бүтэн байдал: Inspect the power cable and Ethernet cable for any damage.
5.2 Cannot Control Camera
- Сүлжээний холболт: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
- Протокол таарахгүй байна: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
- Камерын ID: Ensure the correct camera ID is selected on the controller.
- Нэвтрэх итгэмжлэл: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web интерфейс.
- Цуваа холболт: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
- Програм хангамж: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webшинэчлэлтийн сайт.
5.3 LCD Display Issues
- Дэлгэц байхгүй: Удирдлага асаалттай байгаа эсэхийг шалгаарай.
- Бүдэг дэлгэц: Check if there are any brightness settings on the controller that can be adjusted.
6. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загвар | RGBBKT |
| Хэмжээ (L x W x H) | 11.4 x 7.8 x 5.9 инч (ойролцоогоор 290 x 200 x 150 мм) |
| Жин | 2.2 фунт (ойролцоогоор 1 кг) |
| Дэлгэц | 3.49 инчийн LCD |
| Хяналтын протокол | VISCA over IP, ONVIF v2.42, NDI v5.5, Pelco-D/P |
| Интерфейсүүд | RS232, RS422, RS485, RJ45 Ethernet (PoE) |
| Camera Capacity | Up to 255 PTZ cameras |
| Эрчим хүчний оролт | PoE or DC 12V (external adapter) |
| Жойстик | High-precision Hall sensor 3D joystick |
Image 6.1: Controller dimensions and typical usage environments.
Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.
7. Бүтээгдэхүүний видео үзүүлбэр
Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.
Video 7.1: Official demonstration of the RGBlink PTZ Camera Controller Joystick, showcasing multi-camera control and key features.
8. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webсайт.
- Үйлдвэрлэгч: Шяамень RGBlink Шинжлэх ухаан ба технологийн ХХК
- Албан ёсны Webсайт: www.rgblink.com (Жич: Энэ бол орлуулагч юм URL, please refer to your product packaging or official documentation for the correct support webсайт.)
- Холбоо барих мэдээлэл: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.
