MERXENG 20K BTU Dual Zone Mini Split Air Conditioner

1. Бүтээгдэхүүн дууссанview

The MERXENG 20K BTU Dual 2 Zone Mini Split Air Conditioner is a versatile climate control system designed for multi-room applications. It features a 20 SEER2 rating for energy efficiency and includes cooling, heating, dehumidification, and fan functions. This system is Wi-Fi enabled for convenient control and comes with pre-charged condensers and 16ft installation kits.

Image: MERXENG 20K BTU Dual Zone Mini Split Air Conditioner indoor unit.

2. Оруулсан бүрэлдэхүүн хэсгүүд

The MERXENG 20K BTU Dual Zone Mini Split Air Conditioner system typically includes the following components, delivered in multiple boxes:

Image: Diagram showing the components included in the package, such as indoor units, outdoor unit, remote control, and installation accessories.

• 1 x Гадна хэсэг
• 2 x Indoor Units
• 1 x Алсын удирдлага
• 1 х Дагалдах хэрэгсэл
• 1 х хэрэглэгчийн гарын авлага
• Copper Connection Pipe-Air Pipe (13ft)
• Copper Connection Pipe-Liquid Pipe (13ft)
• Power Line (8ft)
• Communication Wire (15ft)
• Drain Pipe (6.5ft)
• Wrapping Tape
• Luting (Putty)

3. Тохиргоо & Суурилуулалт

Professional installation is mandated for this system. Please ensure all safety precautions are followed during installation. The following video provides a visual guide to the installation process.

3.1. Суулгахын өмнөх бэлтгэл

Before beginning installation, gather all necessary tools and materials. Ensure the installation environment meets the following criteria:

• Ойролцоох дулааны эх үүсвэр эсвэл уурын эх үүсвэр байхгүй.
• Дотор болон гадна төхөөрөмжийн оролт, гаралтын эргэн тойронд ямар ч саад бэрхшээл байхгүй.
• No smoke, oil, flammable, explosive, or corrosive gases present.

Дотор нэгжийн хана нь чичиргээ, чимээ шуугианаас урьдчилан сэргийлэхийн тулд хатуу, тэгш, хатуу байх ёстой. Тохиромжтой цэвэрлэгээг хангах:

• Тааз хүртэл: > 15см
• Саадад (хажуу талдаа): > 20см
• To floor: 230-260cm

3.2. Дотор нэгж суурилуулах

1. Fix Mounting Plate: Place the mounting plate on the wall and use a level to ensure it is horizontal. Select positions for at least 5 screws to firmly fix the plate. Do not use nails.
2. Punch Holes in the Wall: After determining where the pipe will go through the wall, drill holes. The wall hole should be inclined outward by 5-10 degrees, with a diameter of 60-80mm. Use an anti-dust bag to avoid dust. Avoid wires, plumbing, gas, and other sensitive components.
3. Install Connection Cable: Цахилгааны утсыг дотор хэсгийн арын хэсгээс гаргаж, терминалын самбар дээр тогтооно. Кабелийг cl-ээр засаарайamp.
4. Хаах самбар: According to the piping direction, remove the knock-out panel with a knife and remove burrs to prevent the drain pipe from being broken.
5. Хөргөлтийн хоолойг холбох: Use both hands to turn the pipe in the desired direction. It is forbidden to operate with one hand, which can deform or rupture the tube. Aim at the pipe center, tighten the taper nut with fingers, then tighten with 2 wrenches. Refer to the torque table for specific pipe sizes.
6. Ус зайлуулах хоолойг суурилуулах: Connect the drain hose with the water outlet pipe, and fix it firmly with adhesive tape. The length should be more than 5cm to prevent water leakage. Ensure the drain hose is sloped down and never put the end of the drain hose in the water.
7. Хоолойг боох: Хөргөлтийн хоолой, утас, ус зайлуулах хоолойг боолтоор боож өгнө.
8. Дотор нэгжийг суурилуулах: Хөргөлтийн хоолойг хананы нүхнээс гарга. Дотор нэгжийг угсрах хавтан дээр тавь. Дотор нэгж хананд сайн бэхлэгдсэн эсэхийг шалгахын тулд "товших" чимээ гарах хүртэл дотор хэсгийн доод хэсгийг түлхэнэ үү.
9. Хоолойг хамгаалах цагираг ба шаваас: Дамжуулах хоолой ба утсыг хамгаалахын тулд шаваасаар битүүмжилсэн хоолойн хамгаалалтын цагираг суурилуулна.

3.3. Гадна хэсгийн суурилуулалт

The outdoor unit must be installed in a firm and flat place to prevent vibration and noise. If installing at a higher place, operators should wear a safety belt and helmet.

• Бөглөрөх хүртэл (дээд): > 20см
• Бөглөрөл (хажуу тал): > 30см
• Хажуу талын агаар: > 10см
• Агаарын гадна тал: > 200см

1. Гадна нэгжийн хаалт суурилуулах: Use a level to ensure the bracket is horizontal and vertical. Use at least 6 expansion bolts to make sure brackets are fixed firmly on the wall.
2. Гадна нэгжийг засах: Гаднах нэгжийг хаалтанд хийнэ. Гаднах нэгжийн хөлийг засахын тулд 4 боолтыг ашиглана.
3. Хөргөлтийн хоолойг холбох: Remove the nut from the stop valves. Aim at the pipe center of the stop valve, tighten the taper nut with fingers, then tighten with 2 wrenches. Refer to the torque table for specific pipe sizes. Screw 2 caps back on.
4. Кабель засах: Цахилгаан хайрцагны тагийг ав. Цахим эд ангиудын таган дээрх холболтын схемийн дагуу кабелийг терминалын самбарт бэхлэнэ. cl ашиглахamp to fix cables. Put the electrical box cover back.

3.4. Тоос сорогч

Before vacuuming, check all the nuts of the indoor and outdoor unit are tightened. Connect the stop valve, charging hose, manifold valve, and vacuum pump as shown in the diagram.

Image: Diagram illustrating the connection of the vacuum pump, manifold valve, and charging hose to the outdoor unit's stop valves.

1. Turn on the handle Lo to vacuumize.
2. Даралт хэмжигч дээрх утга ≤0.1MPa байгаа эсэхийг шалгаад дор хаяж 15 минутын турш тоос сорогчоор цэвэрлэнэ.
3. Pressure should be kept for 3-5 minutes after vacuumizing, ensuring pressure springback is ≤0.05MPa.
4. Open 1/4 liquid valve, and remove the charging hose.
5. Бүх шингэн болон хийн хавхлагыг нээнэ үү.
6. Бүх тагийг шургуулж, чангална.

3.5. Refrigerant Adjustment Table

When the length of the connecting pipe is changed, an extra amount of refrigerant may need to be added or reduced to maintain optimal operation and performance.

4. Үйлдлийн горим ба онцлогууд

This MERXENG mini split system offers a comprehensive range of functions for year-round comfort and efficiency.

Image: Visual representation of the 4-in-1 functions: Heating, Cooling, Dehumidification, and Ventilation.

4.1. Үндсэн шинж чанарууд

• Multi-room Cooling Solution: Designed to cool any corner of your home, this 20000 BTU 2 zone (12000 BTU+ 12000 BTU) mini split air conditioner can independently adjust the temperature to meet the individual needs of different rooms.
• All-Season Solution: Offers air conditioning, powerful heat pump, dehumidifier, fan, and speed-up turbo function.
• Олон горим ба хурд: 6 modes (auto/cool/heat/dry/fan/sleep) and 5 wind speeds (auto/low/mid/high/strong).
• Нарийвчилсан функцууд: Auto defrost, self-diagnosis/cleaning, iFEEL mode, 24-hour timer, 4-way air swing, sleep mode, silent mode.
• Energy-saving Inverter Technology: 20 SEER grade ensures optimal performance with 30% energy savings. ETL and AHRI certified.
• Ухаалаг хяналт: Remote, mobile app, and voice control functions (works with Alexa/Google Assistant).
• Чимээгүй ажиллагаа: Quiet sleep mode and screen off function for a restful night.

Image: Features for quiet operation including Screen Off, Sleep Mode, Smart Timer, and Low Noise.

Image: Illustrates suitability for various locations such as large rooms, bedrooms, living rooms, and garages.

5. Засвар үйлчилгээ

Regular maintenance ensures optimal performance and longevity of your MERXENG Mini Split Air Conditioner.

5.1. Шүүлтүүрийг цэвэрлэх

The air filter can be easily removed and cleaned. Refer to the user manual for specific instructions on how to access and clean the filters. Regular cleaning of the filters is essential for maintaining air quality and unit efficiency.

5.2. Туршилтын ажиллагаа

After installation, perform a trial operation to ensure proper functioning. This includes checking for electrical safety, water drainage, and any potential leakages.

1. Цахилгааны аюулгүй байдлын шалгалт: Use a multimeter to test possible leaking positions of the outdoor unit shell during trial operation. If there is electricity leakage, turn off power immediately to do further examination.
2. Ус зайлуулах, гоожих туршилт: Remove one filter. Pour in 500ml water along the evaporator for about 20 seconds. Check if water drain can normally flow out and if any water leakage is around the indoor unit.

6. Техникийн үзүүлэлтүүд

7. Баталгаат хугацааны мэдээлэл

This MERXENG Mini Split Air Conditioner comes with a 3 жилийн үйлдвэрлэгчийн баталгаа. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included with your product or contact customer support.

8. Дэмжлэг ба холбоо барих

For technical assistance, troubleshooting, or any inquiries regarding your MERXENG Mini Split Air Conditioner, please contact our customer support team. You can find contact information on the product packaging or visit the official MERXENG webсайт.

Жич: This system mandates professional installation. Attempting DIY installation may void your warranty and pose safety risks.