1. Танилцуулга
This manual provides essential information for the safe and efficient operation of your FLSUN S1 3D Printer. The FLSUN S1 is an advanced delta-type FDM 3D printer designed for high-speed and precise printing. It features a fully enclosed structure, AI-assisted functions, and broad material compatibility. Please read this manual thoroughly before using the printer.
Зураг 1: Урд view of the FLSUN S1 3D Printer, showcasing its sleek, enclosed design and user interface.
2. Аюулгүй байдлын мэдээлэл
Принтерийг гэмтээх, гэмтээхээс сэргийлэхийн тулд дараах аюулгүй байдлын арга хэмжээг үргэлж дагаж мөрдөөрэй.
- Принтерийг тогтвортой, тэгш гадаргуу дээр байрлуулсан эсэхийг шалгаарай.
- Принтерийг агааржуулалт сайтай газар ажиллуулна уу.
- Do not touch the nozzle or heated bed during operation, as they reach high temperatures.
- Ашиглаж байх үед хүүхэд болон гэрийн тэжээвэр амьтдыг принтерээс хол байлга.
- Зөвхөн принтерт дагалдах тэжээлийн адаптерийг ашиглана уу.
- The FLSUN S1 features a closed structure and dual filtration system to optimize air quality during printing, blocking 99% of particulate matter and volatile organic compounds. However, proper ventilation is still recommended.
- Засвар үйлчилгээ эсвэл цэвэрлэгээ хийхээсээ өмнө принтерийг залгуураас нь салга.
3. Багцын агуулга
Бүх зүйл багцад байгаа эсэхийг шалгана уу:
- FLSUN S1 3D Printer
- Цахилгаан кабель
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
- Tool Kit (includes necessary tools for assembly and maintenance)
- Sample Filament
4. Тохиргоо
The FLSUN S1 is designed for quick setup, allowing you to begin printing in approximately 10 minutes from unboxing.
- Савлах: Принтер болон бүх дагалдах хэрэгслийг савлагаанаас болгоомжтой авч хаяна уу. Ирээдүйд тээвэрлэх эсвэл хадгалахын тулд савлагааг хадгална уу.
- Байршил: Place the printer on a stable, level surface with adequate space around it for ventilation and access.
- Эрчим хүчний холболт: Цахилгааны кабелийг хэвлэгч рүү, дараа нь газардуулгатай цахилгаан залгуурт холбоно уу.
- Анхны асаалт: Turn on the printer using the power switch. Follow the on-screen prompts for initial setup.
- Автомат тэгшлэх: The FLSUN S1 features fully automatic bed leveling. Initiate the auto-leveling process via the touchscreen interface as prompted during initial setup or from the settings menu.
Figure 2: The FLSUN S1's touchscreen interface showing the one-button automatic leveling function and an indicator for automatic material shortage сануулагч.
- Утас ачаалах: Load your chosen filament into the designated slot. The direct drive extruder system will guide the filament. Refer to the on-screen instructions for proper loading.
Figure 3: Illustration of the FLSUN S1's fully enclosed delta structure, highlighting the cylindrical build volume with a diameter of 320mm and height of 430mm.
5. Ашиглалтын заавар
The FLSUN S1 is designed for high-speed and precise 3D printing.
5.1 Хэвлэх үйл явц
- Загвар бэлтгэх: Use a compatible slicing software to prepare your 3D model (.STL, .OBJ, etc.) and generate a G-code file.
- G-кодыг шилжүүлэх: G-кодыг шилжүүлэх file to the printer via USB or network connection.
- Select and Start Print: On the printer's touchscreen, select your G-code file and initiate the print. The printer will automatically preheat the nozzle and bed to the required temperatures.
- Хяналтын хэвлэх: Monitor the printing process. The built-in AI Camera can self-optimize print quality and proactively alert you to potential issues. Remote monitoring is also available.
- Хугацаатай гэрэл зураг: The AI Camera can capture time-lapse videos of your prints.
Figure 4: The FLSUN S1 offers remote monitoring capabilities via a computer interface and time-lapse photography, allowing users to record and share their printing process.
5.2 Өндөр хурдтай хэвлэх
The FLSUN S1 is capable of ultra-high-speed printing with a maximum print speed of 1200 mm/s and an acceleration of 40,000 mm/s². This is achieved through its advanced delta-type 3D printing technology and optimized algorithms.
Figure 5: Visual representation of the FLSUN S1's high-speed printing specifications, including a maximum flow rate of 110mm³/s, maximum print speed of 1200mm/s, and maximum acceleration of 40,000mm/s².
5.3 Материалын нийцтэй байдал
The FLSUN S1 supports a wide range of filament types due to its robust full-metal direct extruder, which can reach temperatures up to 350°C, and a heated bed up to 120°C. The chamber temperature can reach up to 50°C.
- Дэмжигдсэн материалууд: PLA, ABS, PETG, ASA, TPU, PVA, PET, PA, PC, and Carbon materials.
Figure 6: Diagram illustrating the FLSUN S1's temperature capabilities for multi-filament printing, showing a 350°C nozzle temperature, 50°C chamber temperature, and 120°C hot bed temperature.
5.4 Нарийвчилсан онцлог
- Closed-Loop Motors: Real-time position monitoring automatically adjusts to detect and correct lost steps, ensuring print accuracy.
- Чичиргээний нөхөн олговор: Optimized algorithms minimize vibration, ensuring print accuracy and preventing surface roughness and deformation.
- CPAP High-Pressure Turbo Fan: A fan with a wind speed of 40,000 rpm automatically adjusts its speed based on printing requirements to ensure optimal cooling and material melting, supporting high-temperature printing up to 350°C.
Figure 7: Demonstrates the effect of closed-loop motors in correcting print errors ("Before" and "After" images of a square print) and the effectiveness of vibration compensation ("OFF" and "ON" images showing print quality improvement).
6. Засвар үйлчилгээ
Regular maintenance ensures the longevity and optimal performance of your FLSUN S1 3D Printer.
- Цэвэрлэгээ: Regularly clean the print bed, nozzle, and interior of the printer to remove any filament debris or dust. Use a soft cloth and appropriate cleaning solutions.
- Шүүлтүүрийн систем: The dual filtration system helps maintain air quality. Check and replace the filters periodically as recommended by FLSUN to ensure effective removal of particulate matter and VOCs.
- Тосолгоо: Apply lubricant to moving parts (e.g., linear rails) as specified in the detailed maintenance guide (if provided separately by FLSUN).
- Програм хангамжийн шинэчлэлтүүд: Keep the printer's firmware updated to benefit from performance improvements and new features. Check the official FLSUN webхамгийн сүүлийн үеийн шинэчлэлтүүдийг авах сайт.
7. Алдаа засах
This section addresses common issues you might encounter. For more complex problems, refer to the FLSUN support resources.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хэвлэмэл орондоо наалдахгүй | Bed not level, incorrect bed temperature, dirty print surface. | Perform automatic bed leveling. Adjust bed temperature in slicing software. Clean the print surface with isopropyl alcohol. |
| Шилэн утас гадагшлахгүй байна | Nozzle clogged, filament tangled, incorrect nozzle temperature. | Clear nozzle clog. Ensure filament spool is free. Verify nozzle temperature is appropriate for the filament type. Check for material shortage сануулагч. |
| Хэвлэх чанар муу (давхаргын шилжилт, барзгар гадаргуу) | Vibrations, incorrect print speed, mechanical issues. | Ensure printer is on a stable surface. The S1's vibration compensation should mitigate this; if not, check for loose components. Adjust print speed. The AI Camera may alert to issues. |
| Принтер асахгүй байна | Power cable disconnected, faulty power outlet. | Check power cable connections. Test power outlet with another device. |
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загвар | FLSUN S1 |
| Хэвлэлийн технологи | FDM (Fused Deposition Modeling) Delta |
| Бүтээлийн хэмжээ | 12.6 x 12.6 x 16.9 inches (320mm diameter x 430mm height) |
| Хамгийн их хэвлэх хурд | 1200 мм/с |
| Max Acceleration | 40,000 мм/с² |
| Экструдерын төрөл | Dual-Gear Direct Drive, Full-Metal |
| Цоргоны хамгийн их температур | 350°C |
| Max Hot Bed Temperature | 120°C |
| Тасалгааны температур | 50 хэм хүртэл |
| Дэмжигдсэн утаснууд | PLA, ABS, PETG, ASA, TPU, PVA, PET, PA, PC, Carbon materials |
| Тэгшлэх | Бүрэн автомат |
| AI онцлог | AI Camera for print quality optimization, issue alerts, time-lapse photography |
| Агаарын шүүлтүүр | Dual filtration system (blocks 99% particulate matter and VOCs) |
| Бүтээгдэхүүний хэмжээс | 21.6"D x 23.4"W x 40.5"H (54.9 x 59.4 x 102.9 см) |
| Зүйлийн жин | 90.4 фунт (41 кг) |
| Материал | Металл |
| Өнгө | Хар |
9. Баталгаат хугацаа ба дэмжлэг
FLSUN provides comprehensive support for the S1 3D Printer.
- Баталгаат хугацаа: FLSUN offers a 12-month after-sales service for the FLSUN S1 3D Printer.
- Техникийн дэмжлэг: For any questions or support needs regarding the product, please contact FLSUN via Amazon. Support inquiries will be responded to within 24 hours.
- Онлайн нөөцүүд: Visit the official FLSUN website for additional resources, FAQs, and firmware updates.
