Танилцуулга
This manual provides detailed instructions for the assembly, operation, and maintenance of your Giantex Twin Kids House Bed with Light Bulbs. Please read this manual thoroughly before assembly and retain it for future reference.
Аюулгүй байдлын мэдээлэл
АНХААРУУЛГА: Эдгээр аюулгүй байдлын зааврыг дагаж мөрдөхгүй байх нь ноцтой гэмтэл учруулж болзошгүй.
- Тогтворгүй байдлаас урьдчилан сэргийлэхийн тулд угсралтын зааврыг үргэлж анхааралтай дагаж мөрдөөрэй.
- Be cautious around sharp edges to avoid injury.
- Keep the bed away from walls or heavy furniture to prevent entrapment.
- Never leave children unattended near the bed.
- Ensure all fasteners are securely tightened before use and periodically check for looseness.
- Хүүхдийг орны хүрээ дээр үсрэхийг бүү зөвшөөр.
- Only use a mattress that fits the interior dimensions of the bed (76" x 39"). A mattress thickness of less than 8 inches is recommended for a snug fit.
Багцын агуулга
Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact Giantex customer service.
- 1 x House Bed Frame (components)
- 1 x LED Bulb Light String
- 1 х хэрэглэгчийн гарын авлага (энэ баримт бичиг)
- Hardware Pack (screws, nuts, etc.)
Угсрах заавар
Assembly requires at least two adults. A power drill may be helpful for faster assembly, but hand tools are sufficient. Follow the numbered steps carefully.
Угсралтын видео гарын авлага
Official installation video for a Twin Size Floor Bed. This video demonstrates the step-by-step assembly process for a similar floor bed model, providing visual guidance for construction.
Алхам алхмаар визуал гарын авлага
Step 1: Prepare the Side Panels
Lay out the two side panels of the bed frame on a clean, flat surface. Ensure all pre-drilled holes are aligned as per the diagram in your included paper manual.
Step 2: Attach the Horizontal Support Beams
Connect the horizontal support beams between the two side panels using the provided hardware. Tighten screws firmly but do not overtighten.
Step 3: Install the Roof Frame
Assemble the roof frame components and attach them to the top of the bed structure. Ensure all connections are secure to form the house shape.
Step 4: Finalize Frame Assembly
Double-check all connections and ensure the frame is stable. The bed is designed to be slat-free, so no additional slats are required for mattress support.
Step 5: Install LED Bulb Lights
Carefully string the LED bulb lights along the roof frame as desired. Secure them using the provided clips or fasteners, ensuring wires are tucked away safely.
Step 6: Place Mattress
Place your twin-size mattress (not included) directly onto the floor within the bed frame. Ensure it fits snugly within the interior area of 76" x 39".
Ашиглалтын заавар
LED Bulb Lights
- Plug the LED light string into a standard electrical outlet.
- Use the integrated switch (if available) or the wall switch to turn the lights on and off.
- Ensure the light string is not tangled or obstructed to prevent overheating.
Засвар үйлчилгээ
- Цэвэрлэгээ: Орны хүрээг зөөлөн арчиж, damp даавуу. Өнгөлгөөг гэмтээж болох хүчтэй химийн бодис, зүлгүүрийн цэвэрлэгчээс зайлсхий.
- Техник хангамжийн шалгалт: Бүх эрэг, бэхэлгээг нягт байлгахын тулд үе үе шалгаж байгаарай. Тогтвортой байдлыг хадгалахын тулд шаардлагатай бол дахин чангална.
- LED гэрэл: If a bulb burns out, replace it with a bulb of the same type and wattage as specified by the manufacturer. Unplug the light string before replacing bulbs.
- Мод арчилгаа: Protect the wood from extreme temperature changes and humidity. Avoid placing hot or wet items directly on the wood surface.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Bed frame feels wobbly. | Сул бэхэлгээ. | Check and tighten all screws and bolts. Ensure all components are correctly aligned. |
| LED гэрэл ажиллахгүй байна. | Not plugged in, faulty bulb, or damaged wire. | Ensure the light string is securely plugged into a working outlet. Check individual bulbs for damage and replace if necessary. Inspect the wire for any visible damage. |
| Матрас таарахгүй байна. | Буруу матрас хэмжээ. | Verify mattress dimensions. The bed is designed for a standard twin mattress (76" L x 39" W). |
| Угсрах явцад дутуу хэсгүүд. | Сав баглаа боодлын алдаа. | Refer to the package contents list and contact Giantex customer service with the specific part numbers. |
Үзүүлэлтүүд
- Брэнд: Giantex
- Загварын дугаар: GX-11229-HU
- Өнгө: Цагаан
- Материал: Solid Wood, Plywood, MDF
- Ерөнхий хэмжээс (L x W x H): 82" x 42" x 51"
- Interior Area for Mattress (L x W): 76" x 39"
- Санал болгож буй матрас зузаан: 8 инчээс бага
- Doorway Width: 16"
- Window Size (L x W): 15" x 11"
- Цэвэр жин: 43 фунт
- Онцлог шинж чанар: LED Lighting, No Box Spring Needed
- Угсрах шаардлагатай: Тиймээ
Баталгаат болон дэмжлэг
For warranty information, missing parts, or technical support, please contact Giantex customer service directly through their official website or the retailer where the product was purchased. Please have your model number (GX-11229-HU) and proof of purchase ready.
You can visit the official Giantex store for more information: Giantex Store
