1. Танилцуулга
The FNIRSI FPM-02 is a high-precision 3-in-1 environmental monitor designed for measuring illuminance (lux), temperature, and humidity. It features a 2-inch color display for clear data visualization and is suitable for various professional applications including office lighting assessment, horticulture, laboratories, and photography studios.
2. Хайрцагт юу байна
- FNIRSI FPM-02 Environmental Monitor
- USB кабель
- Зөөврийн хайрцаг
- Хэрэглэгчийн гарын авлага
3. Үндсэн шинж чанарууд
- 3-in-1 Measurement: Monitors Lux, temperature, and humidity simultaneously.
- 2 инчийн өнгөт дэлгэц: High-definition display with light and dark theme modes for optimal readability.
- Real-time Data & Curve Recording: Visualizes environmental changes over time.
- Adjustable Alarm Thresholds: Alerts users when measurements exceed set values.
- Хурдан Сampханш: 20Hz (50ms) for real-time monitoring.
- Dual-language Interface: Supports English and Chinese.
- Built-in Sleep Mode & Data Logging: Enhances battery efficiency and usage tracking.
Figure 1: FNIRSI FPM-02 Environmental Monitor with key features highlighted on its color screen.
4. Тохиргоо
4.1 Төхөөрөмжийг цэнэглэх
- Connect the provided USB cable to the FNIRSI FPM-02's charging port.
- USB кабелийн нөгөө үзүүрийг стандарт USB тэжээлийн адаптер (дагаагүй) эсвэл компьютерийн USB порт руу холбоно уу.
- The device will indicate charging status on its screen. A full charge typically takes approximately 2-3 hours.
4.2 Асаах/унтраах
- To power on: Press and hold the Power button (usually located on the side or front panel) until the screen illuminates.
- Унтраахын тулд: Төхөөрөмж унтрах хүртэл асаах товчийг дараад барина уу.
5. Ашиглалтын заавар
5.1 Интерфэйсийг удирдах
The FPM-02 features a user-friendly interface with a 2-inch HD color screen. Use the navigation buttons (up, down, left, right, OK/Enter) to move through menus and select options. The device supports both English and Chinese languages, which can be selected in the settings menu.
5.2 Taking Measurements (Illuminance, Temperature, Humidity)
Upon powering on, the device typically defaults to the main measurement screen, displaying real-time values for illuminance (Lux/FC), temperature (°C/°F), and relative humidity (%).
- Гэрэлтүүлэг: Ensure the light sensor (located at the top of the device) is unobstructed and pointed towards the light source or area to be measured. The device will display the light intensity in LUX or FC.
- Температур ба чийгшил: The internal sensors continuously monitor ambient temperature and humidity. Allow a few minutes for readings to stabilize after significant environmental changes.
5.3 Real-time Data and Curve Recording
The device can display real-time data and record changes over time, presenting them as a curve. Access this feature through the main menu to visualize trends and fluctuations in environmental conditions.
5.4 Setting Alarm Thresholds
You can set custom alarm thresholds for Lux, temperature, and humidity. If a measured value exceeds or falls below the set threshold, the device will trigger an alert. Refer to the device's settings menu to configure these thresholds.
5.5 Sleep Mode and Data Logging
To conserve battery, the device features a configurable sleep mode. It also includes data logging capabilities, allowing you to store measurement data for later review and analysis. Consult the user manual for detailed instructions on activating and managing these functions.
6. Засвар үйлчилгээ
- Цэвэрлэгээ: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents. Ensure the light sensor and display are kept clean for accurate readings.
- Хадгалах: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.
- Батерейны арчилгаа: Avoid fully discharging the lithium battery frequently. Recharge the device when the battery level is low.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Төхөөрөмж асахгүй байна. | Батарей бага эсвэл цэнэггүй болсон. | Өгөгдсөн USB кабелийг ашиглан төхөөрөмжийг цэнэглэ. |
| Буруу уншилтууд. | Sensor obstructed or dirty; device not calibrated. | Clean sensors. Ensure proper placement. If issues persist, contact support. |
| Дэлгэц хариу өгөхгүй байна. | Software glitch; extreme temperature. | Restart the device. Ensure operating within specified temperature range. |
8. Техникийн үзүүлэлтүүд
| Параметр | Үнэ цэнэ |
|---|---|
| Загварын дугаар | FPM-02 |
| Гэрэлтүүлгийн хүрээ | 0–1000 / 9999 / 99990 LUX; 10–1000 / 1000 / 10000 FC |
| Гэрэлтүүлгийн нарийвчлал | 0.1 LUX (0–1000); 0.1 FC (10–1000) |
| Гэрэлтүүлгийн нарийвчлал | ±(3% + 5 LUX) with standard incandescent lamp (2854°K); ±(6% + 5 LUX) for other light sources |
| Sampцаг хугацаа | 20Hz (50ms) |
| Дэлгэц | 2″ HD Color Screen |
| Эрчим хүчний эх үүсвэр | 3.7V / 1500mAh литийн батерей |
| Төхөөрөмжийн хэмжээсүүд | 63 × 28 × 182 мм |
| Жин | 205 гр |
| Өнгө | Хар ба Цэнхэр |
| Гарал үүслийн улс | Хятад |
9. Баталгаат хугацаа ба дэмжлэг
This FNIRSI FPM-02 Environmental Monitor comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.